Abstract:cis-Pinane, the hydrogenation product of pinene, is a key chemical intermediate and its production is an important forest chemical process. In this study, alpha-pinene was hydrogenated using a nickel-supported aluminophosphate catalyst (Ni/APO-PT) in the batch mode of operation. The pore structure of the catalyst was characterized, the process parameters were studied, the hydrogenation process was optimized, and the kinetic study was conducted. The results showed that the conversion of pinene was positively correlated with temperature, duration, and catalyst dosage. In contrast, the selectivity of cis-pinane was negatively correlated with temperature and catalyst dosage. An optimization was performed using the response surface methodology (RSM). A selectivity of 96.2% was obtained with alpha-pinene conversion of 98.5% under optimal conditions, that is, a temperature of 405 K, reaction time of 60 min, hydrogen pressure of 3 MPa, and catalyst loading of 3.32 wt%. The reusability of the catalyst was studied, and the catalyst was found to maintain efficient activity for seven cycles. The kinetics of hydrogenation were investigated using both linear and nonlinear methods in the absence of diffusional limitation. In the temperature range from 403 to 433 K, the hydrogenation of alpha-pinene to pinane was compatible with the pseudo-first-order process, and the activation energies for the formation of cis-pinane and trans-pinane were 41.8 and 56.1 kJ/mol, respectively. This study shows that the performance of the Ni/APO-PT catalyst is similar to that of noble metals and the catalyst has the potential for industrial applications.

Optimization of Process Parameters on the Preparation of Pinane via Catalytic Hydrogenation of Pinene

Selective Hydrogenation of Α‐pinene on a Nickel Supported Aluminophosphate Catalyst: Process Optimization and Reaction Kinetics

Process Optimization for Selective Hydrogenation of Α-Pinene over Ni/AlPO4

Optimization of Ni-P/APO-11 amorphous catalyst for catalytic hydrogenation of turpentine using response surface methodology

Optimization of Catalytic Hydrogenation L-Alanine to L-Alaninol

Synthesis of Cyclopentane with Cyclopentanone by the Method of Catalytic Aminolysis

The Exploration of Sensitive Factors for the Selective Hydrogenation of Α-Pinene over Recyclable Ni-B/KIT-6 Catalyst

Preparation of Ni/TiO2-Al2O3 Catalyst and Its Application in Catalyzing Hydrogenation of Turpentine

Hydrogenation of pinene on spent fluid cracking catalyst supported nickel: Langmuir–Hinshelwood kinetic modelling

Hydrogenation of Turpentine Catalyzed by NiCoB/TiO2 Amorphous Alloy Catalysts

Preparation of [Rh(COD)Cl]2 catalyst and its activity for asymmetric hydrogenation ofα-pinene

Preparation and Catalytic Activity of [ Rh(COD) Cl] 2 Catalyst for Turpentine Hydrogenation

Application of Kinetics and Computational Fluid Dynamics in Pinene Isomerization

Study on the kinetics ofα-pinene hydration

Solvent-Free Hydrogenation of α-Pinene to cis -Pinane by Using Ru/TiO 2 Nanocomposite with Strong Acid Sites

The Exploration of Dominant Factors for the Hydrogenation of α-Pinene Over Ni–P/APO-11

Solvent-Free and Highly Efficient Hydrogenation of Α-Pinene to Synthesize Cis-Pinane by Using Ru Species Immobilized on APTS-Functionalized Cubic Phase NaNbO3

Influence of Preparation Modes on Pt–Ni/CNTs Catalysts Used in the Selective Hydrogenation of Cinnamaldehyde to Hydrocinnamaldehyde

Kinetic Study of the Direct Hydration of Turpentine

The Studies on α-Pinene Oxidation over the TS-1. The Influence of the Temperature, Reaction Time, Titanium and Catalyst Content

Synthesis of terpineol catalyzed by acid-doped nano-polyaniline.