Ab initio study of the hydrogen chemisorption of single-walled aluminum nitride nanotubes

San Hua Lim,Jianyi Lin

DOI: https://doi.org/10.1016/j.cplett.2008.10.059

IF: 2.719

2008-01-01

Chemical Physics Letters

Abstract:DFT simulated reaction pathway of hydrogen from physisorption to chemisorption on the external wall of a (8,0) AIN nanotube.

What problem does this paper attempt to address?

Ab Initio Investigation of the Adsorption of Atomic and Molecular Hydrogen on AlN Nanotubes

Anlong Kuang,Guangzhao Wang,Yang Li,Yao Jiang,Gang Wu,Bo Wu

DOI: https://doi.org/10.1016/j.apsusc.2015.03.181

IF: 6.7

2015-01-01

Applied Surface Science

Abstract:The adsorption of atomic and molecular hydrogen on zigzag and armchair AlN nanotubes is investigated within the ab initio density functional theory. The adsorption configurations are magnetic when the H atom is adsorbed on the Al atom and the center of a hexagon. The total magnetic moment is 1.00 mu B which comes from the H atom and the nearest neighbor N atoms. The barrier height of various adsorption configurations is very low, indicating that the adsorbed H atom can easily transform into other forms. The adsorption energies of hydrogen atoms to the zigzag and armchair AlN nanotubes are calculated at 25%, 50%, 75%, 100%, 133%, and 200% coverages, the most favorable adsorption configurations are 100% hydrogen coverages. The adsorption configuration of hydrogen molecule adsorbed on the Al atom is the most energetically favorable. Each Al atom is capable of binding one hydrogen molecule, corresponding to the hydrogen gravimetric density to 8.89 wt%. Our theoretical study demonstrates that AlN nanotube can be a potential candidate for the hydrogen storage materials. (C) 2015 Elsevier B.V. All rights reserved.
Molecular and Atomic Adsorption of Hydrogen on TiO2 Nanotubes: an Ab Initio Study

Feng Lin,Gang Zhou,Zuanyi Li,Jia Li,Jian Wu,Wenhui Duan

DOI: https://doi.org/10.1016/j.cplett.2009.05.018

IF: 2.719

2009-01-01

Chemical Physics Letters

Abstract:Molecular and atomic adsorption of hydrogen on anatase TiO2 nanotubes is investigated using density functional theory. Hydrogen molecules are found to physisorb nondissociatively on the Ti atoms, with little effect on the electronic property of the nanotubes. Differently, a semiconductor-to-metal transition occurs when the hydrogen atoms chemisorb only on the twofold-coordinated O atoms. Further increasing hydrogen concentration will first lead to a 'heterolytic adsorption mode' where the adjacent Ti atoms can also adsorb the hydrogen atoms, and finally the full adsorption in both molecular and atomic forms. The observed adsorption-dependent electronic properties of TiO2 nanotubes is useful for their applications in hydrogen sensors. (c) 2009 Elsevier B.V. All rights reserved.
Ab Initio Study of Hydrogen Interaction with Pure and Nitrogen-Doped Carbon Nanotubes

Zhiyong Zhang,Kyeongjae Cho

DOI: https://doi.org/10.1103/physrevb.75.075420

IF: 3.7

2007-01-01

Physical Review B

Abstract:Detailed studies of mechanisms for hydrogen dissociative adsorption and diffusion on pure and nitrogen-doped (8, 0) carbon nanotubes are carried out using the first-principles density functional theory method. (1) For pure carbon nanotubes, we have identified the energetically most favorable dissociative pathway for hydrogen adsorption, with a barrier height of $1.3\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$. We also found that the adsorbed hydrogen atoms can act as an autocatalyst for further dissociative adsorption of hydrogen molecules. (2) It is found that on pure carbon nanotubes the diffusion of hydrogen atoms is constrained by interaction with neighboring adsorbed hydrogen atoms. The diffusion barrier is around $0.7\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$ for an isolated hydrogen atom, but becomes substantially higher at around $1.4\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$ in the presence of adsorbed hydrogen in neighboring positions. (3) Doping the nanotube with nitrogen considerably alters the catalytic effects of the carbon nanotube for hydrogen dissociative adsorption. The dissociative adsorption of hydrogen on the carbon nanotube is greatly enhanced, with the barrier substantially reduced to ca. $0.9\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$. The differences in the barrier heights are explained through analysis of the electronic structure changes of the nanotube.
Chemisorption and Diffusion of Hydrogen Atoms on Single-Walled Carbon Nanotubes.

Meiyan Ni,Zhi Zeng

DOI: https://doi.org/10.1166/jnn.2010.1952

2010-01-01

Journal of Nanoscience and Nanotechnology

Abstract:Density functional theory has been performed to investigate the chemisorption and diffusion of H atoms on the surface of single-walled carbon nanotubes (SWNTs). The results show that the binding energy of a single hydrogen atom on the SWNTs surface decreases as the diameter of the tube increases and is not affected by the chirality of the tube much. Two hydrogen atoms favor binding at adjacent and opposite positions rather than at alternate carbon site. As for the diffusion of H atoms on the tube, it is found that an isolated H atom can diffuse rather than desorb on the small SWNT upon heating. As the tube diameter increases, the diffusion barrier for H atom on the surface decreases. Further study shows that when the H atom diffuses around another H atom, the diffusion barriers vary with the relative sites of the two H atoms.
Interactions of hydrogen with Pd and Pd/Ni alloy chain-functionalized single walled carbon nanotubes from density functional theory.

Ling Miao,Venkat R Bhethanabotla,M M Ossowski,Babu Joseph

DOI: https://doi.org/10.1021/jp062993e

2006-01-01

Abstract:Density functional theory is employed to study Pd and Pd/Ni alloy monatomic chain-functionalized metallic single walled carbon nanotubes(SWNT(6,6)) and semiconducting SWNT(10,0), and their interactions with hydrogen molecules. The stable geometries and binding energies have been determined for both isolated chains and chains on SWNT surfaces. We found that continuous Pd and Pd/Ni chains form on SWNTs with geometries close to stable geometries in the isolated chains. Ni alloying improves stability of the chains owing to a higher binding energy to both Pd and C atoms. The physical properties of SWNTs are significantly modified by chain functionalization. SWNT(10,0) is transformed to metal by either Pd or alloy chains, or to a smaller band gap semiconductor, depending on the Pd binding site. From calculations for H-2 interactions with the optimized chain-SWNT systems, the adsorption energy per H atom is found to be about 2.6 times larger for Pd/Ni chain-functionalized SWNTs than for pure Pd chain-functionalized SWNTs. Band structure calculations show that the SWNT(10,0) reverts back to semiconductor and SWNT(6,6) has reduced density of states at the Fermi level upon H-2 adsorption. This result is consistent with the experimentally observed increase of electrical resistance when Pd-coated SWNTs are used as H-2 sensing materials. Finally, our results suggest that Pd/Ni-SWNT materials are potentially good H-2-sensing materials.
Binding Energies and Electronic Properties of Hydrogen Adsorptions on 4-Angstrom Carbon Nanotubes

L. Miao,H. J. Liu,Y. W. Wen,X. Zhou,C. Z. Hu,J. Shi

DOI: https://doi.org/10.1166/jctn.2009.1045

2009-01-01

Journal of Computational and Theoretical Nanoscience

Abstract:Chemisorptions of hydrogen on 4 h carbon nanotubes are studied by first-principles pseudopotential method. The calculated hydrogen binding energies show robust chirality and diameter dependence for the interior and exterior adsorptions, respectively. The band structures of these ultrasmall diameter nanotubes are very sensitive to the hydrogen concentration and can undergo transitions between metal, semiconductor, and insulator. Our calculations also indicate that the hydrogen storage capacity can be as high as 9.8 wt% for the (5,0) tube.
Hydrogen chemisorption on Co(0001) surface: A DFT study

Xuefu Shang,Yawei Wang,Xiangming Tao,Mingqiu Tan

DOI: https://doi.org/10.4028/www.scientific.net/AMR.571.48

2012-01-01

Advanced Materials Research

Abstract:In this work the total energy calculations on the atomic geometry and chemisorption properties of Co(0001)/H surface are performed by using the density-functional theory in the approach of the projector-augmented wave (PAW) method. For a clean Co(0001) surface the atomic relaxations of the top three Co(0001) layers are obtained. The adsorptions of atomic Hydrogen have been investigated in the surface periodicities of p(1×1), p(1×2), p(2×2), and (√3 ×√3)R30° combined with hcp hollow and fcc hollow sites. For the cases studied in this work, the atomic hydrogen occupies fcc hollow site preferably drawn from the total energies. In these surface structures the perpendicular distances between the adsorbate and the first layer of substrate (DH-Co) range from 0.93 Å to 0.99 Å. The calculations on the surface vibrational modes proved the frequencies of atomic hydrogen along substrate surface displayed strong dependence on the adsorption geometries. © (2012) Trans Tech Publications, Switzerland.
Theoretical study of hydrogen adsorption in single-walled carbon nanotubes by first principles molecular dynamics method

WANG Li-Li,WANG Chao-Yang,TANG Yong-Jian,FENG Jian-Hong

DOI: https://doi.org/10.3969/j.issn.1000-0364.2012.03.019

2012-01-01

Journal of Atomic and Molecular Physics

Abstract:Adsorption of hydrogen molecules in finite chiral single-walled carbon nanotubes(SWCNTs) was presented using the first-principles plane-wave pseudopotential molecular dynamics simulations method.The hydrogen storages of different diameter nanotubes were studied.The simulation results of hydrogen storage in SWCNTs show that:(1) When the physisorption happens,the H_2 can adsorb in both the cavity of tube and the crevice between tubes.The hydrogen adsorption energy of SWCNTs inner is all higher than that outside of the tube,but the intact H_2 molecules can t go through the tube wall and enter tube inner.(2) When the chemisorption happens,the hydrogen adsorption first appears at the edge of SWCNTs.C atoms bonded with H atoms result in the structural deformation in parts of tube wall and tension of SWCNTs would aggrandize with the increment of the C-H bonds,so the system is unsteady.(3) Along with the increment of the diameter,the difference of hydrogen adsorption capability between the inside and outside of each SWCNT drops off.
Investigating the adsorption behavior of cyano radical on zigzag aluminum nitride and aluminum phosphide nanotubes: A DFT study

Adel Alhowyan,Ahmad J. Obaidullah

DOI: https://doi.org/10.1007/s10450-024-00448-9

2024-04-06

Adsorption

Abstract:Density functional theory (DFT) calculations were utilized to evaluate the adsorption of cyano radical (C≡N) on H-capped (5, 0), (6, 0), and (8, 0) zigzag aluminum nitride nanotubes (AlNNTs) and the results were compared to the adsorption on a (6, 0) zigzag aluminum phosphide nanotube (AlPNT). The most stable configuration (C-side) involves the attachment of CN to the outer surfaces of pure AlPNT and AlNNT via a covalent bond. The adsorption energy ofCN on the (5, 0) AlNNT surface, with a tube diameter of 4.82 Å and length of 16.4 Å, was found to be -253.17 kJ mol −1 through N-side (IV) and -259.12 kJ mol −1 through C-side (V), indicating a chemisorption process. The adsorption ofCN through the C-side on (5, 0) AlNNT is more stable than through the C-side on (6, 0) and (8, 0) AlNNTs. Natural bond orbital (NBO) revealed that in these configurations, there was a charge about 0.254 (C-side) and 0.357 (N-side) |e| transferred from the (5, 0) AlNNT to theCN as an electron acceptor, demonstrated by a strong orbital hybridization during the adsorption process. The decrease in softness, energy gap, and electrophilicity ofCN-adsorbed AlNNT can indicate a shift toward enhanced stability and reduced reactivity. Increasing the diameter and length of AlNNTs leads to significant alterations in the structural and electronic features of the nanotubes, as suggested by our findings. The analysis of the total density of states (DOS) illustrated the interaction betweenCN and the nanotube surfaces resulted in alterations in the electronic structure of the nanotubes.

engineering, chemical,chemistry, physical
Spin-polarized DFT calculations of elemental effects on hydrogen atom adsorption on FeCrAl (110) surface

Xiaojing Li,Yu Ma,Wenzhong Zhou,Zhao Liu

DOI: https://doi.org/10.1016/j.apsusc.2021.152273

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:FeCrAl alloys, due to their high-temperature oxidation resistance and excellent mechanical properties, are considered as one of the most promising substitutes of the current Zirconium alloy as cladding in light water reactors. Hydrogen generation is an inevitable phenomenon in nuclear reactors, and hydrogen diffusion and retention in the cladding material would cause the deterioration of the mechanical and oxidation-resistant properties. Understanding hydrogen adsorption is of great importance for studying the whole diffusion mechanism. In this paper, spin-polarized density functional theory (DFT) calculations were conducted to investigate the H atom adsorption on the (110) surface of pure body-centered cubic structure (BCC) Fe, Cr, Al and FeCrAl. Different initial positions (top and three-fold sites) were calculated to assess how the three elements (Fe, Cr, Al) affect H adsorption. The results show that there are strong elemental effects of Cr and Al on H adsorption. H cannot be adsorbed at the top site of FeCrAl surfaces but it is stably adsorbed at the three-fold sites consisting of the Fe and Cr atoms. However, no H adsorption occurs at the three-fold site containing the Al atoms due to their charge deficiency. According to the charge density difference analyses, Al atoms influence the adsorption of FeFe-Cr and Fe-Cr-Cr sites mainly by influencing the interactions between Cr and H.
Hydrogen Adsorption, Migration and Desorption on Amorphous Carbon: A DFT and AIMD Study

Ying-Cheng Chen,Amita Sihag,Ranjini Sarkar,Tsan-Yao Chen,Matthew Stephen Dyer,Fan-Gang Tseng,Hsin-Yi Tiffany Chen

DOI: https://doi.org/10.1016/j.matchemphys.2024.129711

IF: 4.778

2024-01-01

Materials Chemistry and Physics

Abstract:Physisorption is the general dominating adsorption mode on pure carbonaceous materials. In this study, we examined if chemisorbed hydrogen can be accomplished without incorporating metals on carbon surfaces. We constructed two 100-atom amorphous carbon (a-C) models with different microenvironments (42 % 2-fold, 52 % 3-fold, and 6 % 4-fold coordinated carbon atoms and 18 % 2-fold and 82 % 3-fold, respectively) using ab initio molecular dynamics (AIMD) simulations to mimic activated carbon samples in reality. The structural, energetic, electronic structure and kinetic properties of hydrogen adsorption, migration, and desorption on the a-C surfaces were analyzed using density functional theory (DFT) and AIMD calculations, which showed that: (1) hydrogen molecules could spontaneously dissociate on the convex side of 2-fold coordinated carbon atoms. Physisorption of hydrogen molecules mainly took place on 3-fold coordinated carbon atoms. (2) Regarding the multiple hydrogen adsorption, the entire a-C model could uptake around 156 hydrogen atoms with the adsorption energy per hydrogen atom about-0.70 to-0.60 eV at high hydrogen pressure. In addition, we found that the average individual adsorption energy of a single hydrogen atom on different carbon atoms could be used as a quick prediction for the saturated hydrogen adsorption energy. (3) The migration barrier of a hydrogen atom between two adjacent carbon atoms was about 2 eV at both low and high hydrogen coverage, indicating that hydrogen mobility on this designed a-C model was low. The desorption of a hydrogen molecule can take place at 300 K using AIMD calculation, but not for atomic hydrogen desorption. In this work, we demonstrated that hydrogen chemisorption could take place on this designed a-C without the decoration of metal particles to enhance hydrogen adsorption amounts. The materials design to balance hydrogen chemisorption, migration, and desorption shall be considered in the future.
Ab initio study of aspirin adsorption on single-walled carbon and carbon nitride nanotubes

Yongju Lee,Dae-Gyeon Kwon,Gunn Kim,Young-Kyun Kwon

DOI: https://doi.org/10.1039/c6cp08122c

IF: 3.3

2017-01-01

Physical Chemistry Chemical Physics

Abstract:Using density functional theory, we investigate the adsorption properties of acetylsalicylic acid (aspirin) on the outer surfaces of a (10,0) carbon nanotube (CNT) and a (8,0) triazine-based graphitic carbon nitride nanotube (CNNT).

chemistry, physical,physics, atomic, molecular & chemical
A Computational Study of Hydrogen Adsorption on Penta-Nin2 Sheet and Nanotubes

Ahmed H. Ati,Jiewei Cheng,Qiang Sun

DOI: https://doi.org/10.1016/j.ijhydene.2023.06.120

IF: 7.2

2023-01-01

International Journal of Hydrogen Energy

Abstract:Stimulated by the recent synthesis of penta-NiN2 sheet [ACS Nano 2021, 15, 13,539], we study the hydrogen adsorption on the sheet and the derived nanotubes by using density functional theory with the correction of van der Waals interactions. We have found that each Ni site can only adsorb two hydrogen molecules as expected from the 18-electron rule, the corresponding capacity is 4.44 wt%. As more H2 molecules are introduced, H2 can only be very weakly adsorbed on N sites. When the sheet is curved into nanotubes, the Ni-N distance is enlarged due to the stress, which weakens the orbital hybridizations between Ni and N, and reduces the charge transfer from Ni to N. The Ni ion with a less charge on the tube shows weak polarizing ability for H2 molecule.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Density Functional Study of the Adsorption and Separation of Hydrogen in Single-Walled Carbon Nanotube

C Gu,GH Gao,YX Yu

DOI: https://doi.org/10.1016/s0360-3199(03)00131-9

IF: 7.2

2004-01-01

International Journal of Hydrogen Energy

Abstract:In this work, we report an investigation by means of density functional theory (DFT) of the adsorption of hydrogen and the separation of hydrogen–carbon monoxide mixture in an isolated single-walled carbon nanotube. The theory is based on a perturbative construction of free energy functional for inhomogeneous pure fluid and binary fluid mixture. The reformulated Rosenfeld's fundamental-measure theory using the excess Helmholtz energy density from the Boublik–Mansoori–Carnahan–Starling–Leland equation of state proposed by Yu and Wu (J. Chem. Phys. 117 (2002) 10156) is applied to represent the pure and binary hard-sphere repulsive interaction, and Weeks–Chandler–Andersen perturbation theory is used to build the attractive contribution. The density profiles in three sizes of tubes at 300K and reduced bulk density from 0.2 to 0.7 for pure hydrogen and hydrogen–carbon monoxide mixture are obtained. The theoretical calculations are in good agreement with the simulation results in this work and other data available in literature. The adsorption of hydrogen and the selectivity of hydrogen–carbon monoxide mixture are predicted from DFT and the adsorption characteristics of the isolated cylindrical wall is discussed.
The Static and Dynamic Lattice Changes Induced by Hydrogen Adsorption on NiAl(110)

Aubrey T. Hanbicki,P. J. Rous,E. W. Plummer

DOI: https://doi.org/10.48550/arXiv.cond-mat/0205623

2002-05-29

Materials Science

Abstract:Static and dynamic changes induced by adsorption of atomic hydrogen on the NiAl(110) lattice at 130 K have been examined as a function of adsorbate coverage. Adsorbed hydrogen exists in three distinct phases. At low coverages the hydrogen is itinerant because of quantum tunneling between sites and exhibits no observable vibrational modes. Between 0.4 ML and 0.6 ML, substrate mediated interactions produce an ordered superstructure with c(2x2) symmetry, and at higher coverages, hydrogen exists as a disordered lattice gas. This picture of how hydrogen interacts with NiAl(110) is developed from our data and compared to current theoretical predictions.
First-principles study of a single Ti atom adsorbed on silicon carbide nanotubes and the corresponding adsorption of hydrogen molecules to the Ti atom

Tiezhu Meng,Chong-Yu Wang,Shan-Ying Wang

DOI: https://doi.org/10.1016/j.cplett.2007.02.024

IF: 2.719

2007-01-01

Chemical Physics Letters

Abstract:The adsorption of a single Ti atom on single-wall silicon carbide nanotubes and the corresponding hydrogen adsorption properties are investigated. Ti and C form strong chemical bond while the interaction between Ti and Si is weak. Up to four hydrogen molecules can be attached to the Ti atom.
Adsorption and dissociation of hydrogen molecules on bare and functionalized carbon nanotubes

S. Dag,Y. Ozturk,S. Ciraci,T. Yildirim

DOI: https://doi.org/10.1103/PhysRevB.72.155404

2005-04-27

Abstract:We investigated interaction between hydrogen molecules and bare as well as functionalized single-wall carbon nanotubes (SWNT) using first-principles plane wave method. We found that the binding energy of the H$_{2}$ physisorbed on the bare SWNT is very weak, and can be enhanced neither by increasing the curvature of the surface through radial deformation, nor by the coadsorption of Li atom that makes the semiconducting tube metallic. Though the bonding is strengthened upon adsorption directly to Li atom, yet its nature continues to be physisorption. However, the character of the bonding changes dramatically when SWNT is functionalized by the adsorption of Pt atom. Single H$_{2}$ is chemisorbed to Pt atom on the SWNT either dissociatively or molecularly. If Pt-SWNT bond is weakened either by displacing Pt from bridge site to a specific position or by increasing number of the adsorbed H$_{2}$, the dissociative adsorption of H$_{2}$ is favored. For example, out of two adsorbed H$_{2}$, first one can be adsorbed dissociatively, second one is chemisorbed molecularly. The nature of bonding is weak physisorption for the third adsorbed H$_{2}$. Palladium also promotes the chemisorption of H$_{2}$ with relatively smaller binding energy. Present results reveal the important effect of transition metal atom adsorbed on SWNT and advance our understanding of the molecular and dissociative adsorption of hydrogen for efficient hydrogen storage.

Materials Science
Monte Carlo Simulations Of Hydrogen Adsorption In Single-Walled Carbon Nanotubes

C Gu,Yx Yu,Gh Gao

2000-01-01

Abstract:The adsorption of hydrogen gas into single-walled carbon nanotubes (SWNTs) is studied by computer simulation. Hydrogen-hydrogen and hydrogencarbon interactions are both modeled with Lennard-Jones potential. Hydrogen-carbon interactions are integrated over the whole nanotube to get molecule-wall interactions. Grand canonical Monte Carlo simulation is used in calculation. Four adsorption isotherms of different tube diameters at 293K and one adsorption curve of different van der Waals (VDW) distances are displayed. Finally, the influence on adsorption of different SWNTs' diameters and VDW distances are discussed.
Interaction of hydrogen molecules on Ni-doped single-walled carbon nanotube

Ni Mei-Yan,Wang Xian-Long,Zhi Zeng

DOI: https://doi.org/10.1088/1674-1056/18/1/058

2009-01-01

Chinese Physics B

Abstract:Adsorption of hydrogen molecules on an Ni-doped (8,0) single-walled carbon nanotube (SWNT) is investigated by using first-principles density functional calculations. The result shows that a single Ni atom adsorbed on the bridge site of the tube could cannot dissociate the H-2, however it can chemisorb three H-2 at most, with the average binding energy per H-2 suitable for the hydrogen storage at the room temperature. More H-2 would physisorb around an Ni atom weakly. As for the SWNT with an Ni dimer adsorbed, we find that when the H-2 approaches the Ni-Ni bond, it dissociates without overcoming any barrier and makes bonds with Ni atom.
Hydrogen-induced Unzipping of Single-Walled Carbon Nanotubes

Henry Scudder,Gang Lu,Nicholas Kioussis

DOI: https://doi.org/10.48550/arXiv.cond-mat/0208542

2002-09-01

Abstract:The chemisorption of atomic hydrogen on the single-walled armchair carbon nanotube is studied with ab initio calculations. A single H atom is found to be chemisorbed on both the inside and outside wall of the nanotube. The binding energy of H adsorption at the exterior of the nanotube is much greater than that at the interior of the nanotube. For the first time, we predict that two rows of H atoms chemisorbed on selective sites exterior to the nanotube can break the nearest-neighbor C-C bond of the nanotube through the concerted formation of C-H bonds, leading to the unzipping of the nanotube wall. We provide insights into the underlying electronic structure responsible for the H-induced unzipping of the nanotube, lending strong support to the recent experimental observations for the coalescence of single-walled nanotubes in the presence of atomic hydrogen. Interestingly, H atoms chemisorbed inside the nanotube do not lead to the breaking of the C-C bonds.

Materials Science

Ab initio study of the hydrogen chemisorption of single-walled aluminum nitride nanotubes

Ab Initio Investigation of the Adsorption of Atomic and Molecular Hydrogen on AlN Nanotubes

Molecular and Atomic Adsorption of Hydrogen on TiO2 Nanotubes: an Ab Initio Study

Ab Initio Study of Hydrogen Interaction with Pure and Nitrogen-Doped Carbon Nanotubes

Chemisorption and Diffusion of Hydrogen Atoms on Single-Walled Carbon Nanotubes.

Interactions of hydrogen with Pd and Pd/Ni alloy chain-functionalized single walled carbon nanotubes from density functional theory.

Binding Energies and Electronic Properties of Hydrogen Adsorptions on 4-Angstrom Carbon Nanotubes

Hydrogen chemisorption on Co(0001) surface: A DFT study

Theoretical study of hydrogen adsorption in single-walled carbon nanotubes by first principles molecular dynamics method

Investigating the adsorption behavior of cyano radical on zigzag aluminum nitride and aluminum phosphide nanotubes: A DFT study

Spin-polarized DFT calculations of elemental effects on hydrogen atom adsorption on FeCrAl (110) surface

Hydrogen Adsorption, Migration and Desorption on Amorphous Carbon: A DFT and AIMD Study

Ab initio study of aspirin adsorption on single-walled carbon and carbon nitride nanotubes

A Computational Study of Hydrogen Adsorption on Penta-Nin2 Sheet and Nanotubes

Density Functional Study of the Adsorption and Separation of Hydrogen in Single-Walled Carbon Nanotube

The Static and Dynamic Lattice Changes Induced by Hydrogen Adsorption on NiAl(110)

First-principles study of a single Ti atom adsorbed on silicon carbide nanotubes and the corresponding adsorption of hydrogen molecules to the Ti atom

Adsorption and dissociation of hydrogen molecules on bare and functionalized carbon nanotubes

Monte Carlo Simulations Of Hydrogen Adsorption In Single-Walled Carbon Nanotubes

Interaction of hydrogen molecules on Ni-doped single-walled carbon nanotube

Hydrogen-induced Unzipping of Single-Walled Carbon Nanotubes