Abstract:Applying unified formula for stress-strain relations of concrete under unixial load,ABAQUS was used to establish the 3D finite element model and to analyze the behavior of concrete-filled circular steel tubular(CFST) dumbbell shaped stub columns under axial compression.The elasto-plastic method was also used to analyze the load-deformation curve of CFST dumbbell shaped stub columns when the CFST dumbbell shaped stub column was simplified as superposition with the two CFST stub columns,the two steel webs and the concrete inside the steel web space.The load-axial strain behavior of CFST dumbbell shaped stub columns was analyzed by both finite element method and elasto-plastic method.The analysis results are in good agreement with the experiment results from references.Analytical results by elasto-plastic method are slightly lower than that by finite element method.Then based on the two methods,the axial stress and perimeter stress of steel tube,the longitudinal and perimeter stress of steel web,the axial stress and radial stress of concrete core,and the longitudinal stress of concrete inside the steel web space in CFST dumbbell shaped stub columns were discussed.At yield state,the axial stress of section steel was slightly lower than its yield stress because of the confinement effect for concrete.The analytical stresses in CFST dumbbell shaped stub columns by the two methods were almost the same,and the finite element model could reflect that the longitudinal stress of the concrete inside the steel web space increases lightly for the concrete confined by steel webs.Based on the limit equilibrium method,simplified formula for the axially loaded CFST dumbbell shaped stub columns was proposed.The analysis results by limit equilibrium method are close to those by finite element method,and both are in safe range compared with the experiment results from references.

FOUMULA OF THE AXIAL STRENGTH OF S-CFT WITH BINDING BARS BASED ON UNIFICATION THEORY

Axial Strength of Square and Rectangular CFT with Binding Bars Based on Unification Theory

Analysis on Axial Strength of R-CFT Stub Column with Unidirectional Binding Bars

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Application of Smeared Cracking and Damaged Plasticity Models in FEA of CFT

Experiment on T-Shaped CFT Stub Columns with Binding Bars Subjected to Axial Compression

Experimental and numerical investigations of square concrete-filled double steel tubular stub columns

Behavior of Axially Loaded Concrete-Filled Steel Tubular Dumbbell Shaped Stub Columns

Nonlinear Analysis and Design of Concrete-Filled Dual Steel Tubular Columns under Axial Loading

A Unified Formulation for Axial Compression of Steel Tube-Confined Concrete and Concrete-Filled Steel Tube Stub Columns

A Unified Formulation for Hollow and Solid Concrete-Filled Steel Tube Columns under Axial Compression

Nonlinear finite element analysis of axially loaded concrete-filled steel tubular stub columns

Unified theory on the capability of hollow polygonal CFST compression and bending members

Axial strength of CFST columns considering concrete age

Axial Compressive Behaviour of Concrete-Filled Double-Tube Stub Columns with Stiffeners

Analysis and Simplified Calculation of Mechanical Behavior of Concrete-Filled Steel Short Columns under Axial Compression Based on Three Parameters

Simplified calculation formulation for cross-section strength of concrete filled square steel tubular columns