Abstract:Bituminous coal char particles will differ in morphology, porosity, reactivity, and behavior within the zone II regime (where most practical system operates) due to the influence of maceral, rank, and time-temperaturehistories. Effective boiler design requires simulations that appropriately capture char behavior. Most simulations, however, assume solid spherical particles that have homogeneous physical and chemical properties. Unfortunately, coal and time-temperature-history variations make it impossible to make a direct comparison of morphologies alone using traditional experimental approaches. Thus, here the influences of coal char morphologies on its reaction behavior and physical structure were explored via small-scale atomistic simulations. Three (ashfree) chars of solid, thick-, and thin-walled morphologies were examined. The atomistic representations had similar to 143000 carbon atoms, comprised of similar polycyclic aromatic hydrocarbons (PAH) sizes and stacking distributions. While these structures are far below the actual particle size, the approach permits a direct comparison with a level of control not possible via physical experimentation. The densities of the thick- and thin-walled char models were similar to literature observations (apparent and helium densities). The specific surface area for the solid, thick-, and thin-walled char models were 110, 368, and 509 m(2)/g, with the latter two being closer to experimental data. A simplified combustion simulation (diffusion and oxygen proximity calculations) demonstrated that the char morphology had a significant impact upon their relative reactivities. The thin-walled structure had the highest overall reactivity due to greater reactive surface access, while the solid and thick-walled structure was respectively 27 and 23% lower. The reaction rate profiles with char conversion for these three structures are close to the experimental observations for pulverized bituminous coal chars, where the rate peak occurs at similar to 20% conversion. The changes in char size, density, and specific surface area (with char conversion) indicated the thick-walled structure was more similar to the literature data. These atomistic approaches have the potential to aid in exploring the reaction behavior of char particles with various morphologies and complicated structures. With scale-up additional behaviors such as particle fragmentation and ash behavior could be incorporated.

Effects of Particle Shape and Size on Black Liquor and Biomass Reactivity

Effects of Particle Shape and Size on Devolatilization of Biomass Particle

Biomass Combustion Characteristics And Implications For Renewable Energy

Assessing the Effect of Size and Shape Factors on the Devolatilization of Biomass Particles by Coupling a Rapid-Solving Thermal-Thick Model

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Effects of Biomass Particle Size on Slow Pyrolysis Kinetics and Fast Pyrolysis Product Distribution

Impact of Dilution Ratio and Burning Conditions on the Number Size Distribution and Size-Dependent Mixing State of Primary Particles from Domestic Solid Fuel Burning

Combustion Details of Raw and Torrefied Biomass Fuel Particles with Individually-Observed Size, Shape and Mass

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Modelling the Combustion of Thermally Thick Biomass Particles

Impact of Particle Size Polydispersity on Chemical Looping Combustion of Biomass under a Continuous Injection Mode

The Influence of Char Particle Morphology on Char Burnout Behavior by Atomistic Simulation

Effect of particle shape on biomass pyrolysis in a bubbling fluidized bed

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Carrier-phase Direct Numerical Simulation and Flamelet Modeling of Alkali Metal Emissions from Pulverized Biomass Flames

Effect of Particle Size on Pyrolysis Kinetics of Forest Fuels in Nitrogen

Effect of Turbulent Mixing on Combustion Behaviours of a Single Biomass Pellet

Effect of particle characteristics, kinetics and transport phenomena on the prediction of particle mass loss and products yields during biomass fast pyrolysis

Pyrolysis Characteristics of Coal, Biomass, and Coal–Biomass Blends under High Heating Rate Conditions: Effects of Particle Diameter, Fuel Type, and Mixing Conditions

Effects of biomass particles size and shape on combustion process in the swirl-stabilized burner reactor: CFD and machine learning approach