Abstract:The mechanical properties of unidirectional fiber-reinforced plastic (UD-FRP) are affected by a variety of micro-defects, such as random fiber arrangement, fiber misalignment and micro-voids. This study aims to investigate how these multiple micro-defects interact with each other and how they affect the strength and failure mechanism of UD-FRP by means of computational micromechanics. The composite behavior was simulated by the finite element analysis of a representative volume element of the composite microstructure in which the random distribution of fibers, the micro-voids, and the fiber misalignment are explicitly included. Both matrix and interface failure were considered for the loadings of transverse tension/compression, longitudinal compression, transverse/longitudinal shear, and their combination. It was found that these three micro-defects significantly weakened the compressive strength of UD-FRP along the longitudinal direction. Especially, the fiber misalignment magnified the effect of fiber arrangement, while the micro-voids reduce the effect. Besides, the fiber arrangement and micro-voids significantly weakened the tensile and compressive strength of UD-FRP along the transverse direction, but their interaction effect was not obvious. Moreover, transverse and longitudinal shear strength are significantly affected by micro-voids, but only longitudinal shear is affected by geometric fiber arrangement, and this effect is also weakened by micro-voids. Finally, the damage envelope under the combined longitudinal compression and transverse loads was obtained and compared with the Tsai-Wu failure criterion. The results showed that the Tsai-Wu criteria can provide an effective estimation for the failure locus under this biaxial loading condition.

On Several Problems of Macro / Micro Failure Mechanics

Micro Failure Analysis of Fiber Metal Laminates

Damage Micromechanics for Constitutive Relations and Failure of Microcracked Quasi-Brittle Materials

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Review of Damage Mechanics

Micromechanical Modeling of Strain-Softening in Microcrack-Weakened Quasi-Brittle Materials

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Failure analysis from microcracks to a dominant crack in MEMS thin films using combined damage and fracture mechanics

Study on Macro–Meso Failure Mechanism of Pre-fractured Rock Specimens Under Uniaxial Compression

Micromechanical Analysis of Microcrack-Induced Residual Strains in Quasi-Brittle Solids

Quasi-Micromechanical Constitutive Theory for Brittle Damaged Materials under Tension

Numerical analysis of interaction and coalescence of numerous microcracks

RESEARCH ON SEVERAL MECHANICAL PROBLEMS IN MICROELECTROMECHANICAL SYSTEMS

Macro-micro mechanical modelfor progressive and creep failure of brittle rock

Micromechanics-based model study of shear properties of brittle rocks

Quasi-micromechanical damage model for brittle solids with interacting microcracks

A novel micromechanics-enhanced phase-field model for frictional damage and fracture of quasi-brittle geomaterials

Micromechanical Modeling Of Tensile Response Of Elastic-Brittle Materials

A Review of the Extended Finite Element Method on Macrocrack and Microcrack Growth Simulations

Three-Dimensional Micromechanical Model for Quasi-Brittle Solids with Residual Strains under Tension