Abstract:A comparative experiment to determine the effect of tiny mass eccentricity in 12.7mm spin-stabilized projectiles on the position of the impact points.An artificial intelligence algorithm, Adaptive Neuro-Fuzzy Inference Systems (ANFIS), was applied to model the shooting process of the weapon system in this work.This study used Sobol's algorithm for analyzing models to calculate their global sensitivity indices and determine the four most influential factors. This will enable engineers to adjust outputs toward expected values by fine-tuning influential parameters.This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS) – in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61cm at a target range of 200m. Variance analysis indicated that the entry angle – i.e. the initial position of mass eccentricity – had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (<math>Izz</math>,<math>Iyy</math>), the mass of a projectile (<math>m</math>), the distance between nose and center of mass along the symmetry axis for a projectile (<math>Lm</math>), and the eccentric distance of the centroid (<math>Lr</math>). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.

A new calibration algorithms of spinning projectile aerodynamic parameters

Numerical Solution of the Aerodynamic Properties of the Rotating Projectiles

Research on the Calibration Method of Micro Inertial Measurement Unit for Engineering Application.

Kinematic Calibration for Articulated Arm Coordinate Measuring Machines Base on Particle Swarm Optimization

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Research on the navigation method of large-scale differential tail-control improvised guided munitions based on rotational speed constraints

Vibration reduction performance of an arc tripod structure for firing accuracy improvement

Study on Characteristics of Dynamic Equilibrium Angle of the Spin-Stabilized Projectile

Unsteady aerodynamic modeling and flight trajectory simulation of dual-spin projectile based on DNN and transfer-learning

Trajectory Analysis of a Dual-Spin-stabilized Projectile with Fixed-Canards for the Precision Guidance Kit

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

Calibration equipment for rocket nozzle motion testing and its error analysis

Roll Angular Rate Measurement for High Spinning Projectiles Based on Redundant Gyroscope System

Attitude Measurement for High-Spinning Projectile with a Hollow MEMS IMU Consisting of Multiple Accelerometers and Gyros

In-Flight Calibration of Lorentz Actuators for Non-Contact Close-Proximity Formation Satellites with Cooperative Control

Dynamics Characterization of Missiles with Control Flaps Based on CFD

Measurement model and accuracy analysis of parabolic ballistic projectile flight parameters based on random matrix

Modeling and Simulation Research of a New Calibration Platform for Visual Test System

Accurate Calibration of a Self-Developed Vehicle-Borne LiDAR Scanning System

Calibration and Application of Space Non-cooperative Target Relative Measurement Ground Simulation System