Abstract:Ionic polymer–metal composites (IPMC), one of the most popular materials in the field of artificial muscle research, have attracted much attention because of their high flexibility, low drive voltage (<10 V), high force density, large deformation, and so forth. However, the results show that the serious electrode fatigue crack and water loss of traditional IPMC greatly decrease its fatigue life and limit the practical application. In this study, we developed a novel liquid metal composite electrode. A layer of eutectic gallium–indium alloy (EGaIn) liquid metal was applied to the surface of the platinum electrode of the IPMC using a mask. Because of the good self-healing performance of the liquid metal, it is expected to solve the above problems of resistance increase and water loss caused by cracks. It turns out that the prepared EGaIn/Pt-IPMC exhibits a driving force up to 120 mN and maximum fatigue life of about 25,000 s at a driving voltage of 3 V. Compared with the best work reported, the fatigue strength of EGaIn/Pt-IPMC was increased by about 210%, and the maximum driving force of EGaIn/Pt-IPMC prepared by a single-layer basement membrane was between the IPMC prepared by 4–6 layer basement membrane. The electromechanical properties were significantly improved, and it is expected to realize a series of bionic applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01453.Additional performance characterization data for EGaIn/Pt-IPMC, such as the effect of drive voltage frequency and amplitude on displacement, and the ability of EGaIn to repair cracked electrode IPMC (including drive force enhancement and fatigue displacement enhancement) (PDF)Imitating fish tail wobble (MP4)Imitating dragonfly wings (MP4)Bionic artificial hand (MP4)High-amplitude high-frequency swing (MP4)This article has not yet been cited by other publications.

Mechanical Stability Optimization of Flemion-Based Composite Artificial Muscles by Use of Proper Solvent

An Artificial Muscle Driven By Decomposition Of Gas Solution

A Flemion-Based Actuator with Ionic Liquid As Solvent

Review on Improvement, Modeling, and Application of Ionic Polymer Metal Composite Artificial Muscle

Highly Flexible, Large-Deformation Ionic Polymer Metal Composites for Artificial Muscles: Fabrication, Properties, Applications, and Prospects

Comparative Experimental Investigation On The Actuation Mechanisms Of Ionic Polymer-Metal Composites With Different Backbones And Water Contents

Ionic Polymer-Metal Composites: From Material Engineering to Flexible Applications

An Antifatigue Liquid Metal Composite Electrode Ionic Polymer-Metal Composite Artificial Muscle with Excellent Electromechanical Properties

Conjugated polymer composite artificial muscle with solvent-induced anisotropic mechanical actuation

Large deformation ionic polymer-metal composites actuators based on porous Nafion membranes

Low-Voltage Driven Ionic Polymer-Metal Composite Actuators: Structures, Materials, and Applications

Electromechanical Response of Fungus Polysaccharide Gel Artificial Muscle Prepared from Tremella Fuciformis Extract and Carboxylated Chitosan

High-performance Biocompatible Nano-Biocomposite Artificial Muscles Based on a Renewable Ionic Electrolyte Made of Cellulose Dissolved in Ionic Liquid

High water content electrically driven artificial muscles with large and stable deformation for soft robots

A Packaging Technology and Drive Stability of Ionic Polymer-Metal Composite Materials Based on Ionic Liquid Type Electrolyte Layer

Printing ionic polymer metal composite actuators by fused deposition modeling technology

A Compact Review of IPMC as Soft Actuator and Sensor: Current Trends, Challenges, and Potential Solutions From Our Recent Work

Improved manufacturing technology for producing porous Nafion for high-performance ionic polymer–metal composite actuators

Liquid crystalline reduced graphene oxide composite fibers as artificial muscles

Preparation and Electrochemical Performance Analysis of Flexible Ionic Polymers by Freeze-Drying Technology

Multiphysics of Ionic Polymer–metal Composite Actuator