Abstract:Biomass energy is an emerging alternative energy source with an attractive carbon balance in its life cycle. Recently, a biomass fast pyrolysis fuel was produced from rice husk, and it was further upgraded using supercritical ethanol with a 5%Pt/SO42−/ZrO2/SBA-15 catalyst in a hydrogen atmosphere. This upgraded biomass pyrolysis fuel is mainly composed of ethers, esters, alcohols and ketones. After analysing the composition of this upgraded biomass pyrolysis fuel, the authors reproduced a mixed fuel to mimic the upgraded biomass pyrolysis fuel. This mixed fuel contained ethanol, ethyl acetate, diethyl ether, acetone, and 2-butanone, with mass ratios of 9:6:2:1:1. This fuel has been used in a gasoline engine with some minor modifications; however, there is no data available for its laminar burning characteristics. In this study, the laminar burning characteristics of this mixed fuel were investigated in a constant volume combustion chamber (CVCC) at an initial pressure of 0.1MPa and initial temperatures of 358, 388 and 418K), and at an initial temperature of 358K and initial pressures of 0.1, 0.2 and 0.4MPa. By using a Schlieren high-speed imaging technique and a linear extrapolation method, laminar burning characteristics including the unstretched flame propagation speed, laminar burning velocity and other key parameters were calculated and discussed. Experiments were also conducted for two main components, ethanol and ethyl acetate, and results were used as benchmarks. The results indicated that the peak laminar burning velocity of the mixed fuel can be observed near the equivalence ratio of 1.1 under the tested conditions. At the same equivalence ratio, the laminar burning velocity was increased as initial temperature was increased, and it was decreased as initial pressure was increased. Markstein length decreased as equivalence ratio was increased, and it dropped below zero when the equivalence ratio was 1.4, indicating increased flame instability with equivalence ratio increased. Among the three examined fuels, the laminar burning velocity ranking was: ethanol>mixed fuel>ethyl acetate.

Pyrolysis of hydrocarbon fuel ZH-100 under different pressures

Laminar Burning Characteristics of Upgraded Biomass Pyrolysis Fuel Derived from Rice Husk at Elevated Pressures and Temperatures

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Effect of Pressure on Regenerative Cooling Process of Endothermic Hydrocarbon Fuel at Severe Pyrolysis Conditions

The heat transfer mechanism coupling pyrolysis and flow of hydrocarbon fuel in heated tube under supercritical pressure

Supercritical-Pressure Heat Transfer, Pyrolytic Reactions, and Surface Coking of N-Decane in Helical Tubes

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Simplification of Pyrolytic Reaction Mechanism and Turbulent Heat Transfer of N-Decane at Supercritical Pressures

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Thermal Cracking and Heat Transfer of Hydrocarbon Fuels at Supercritical Pressures in Vertical Tubes

Experimental and Modeling Investigation of N-Decane Pyrolysis at Supercritical Pressures

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Pyrolysis of C8-C16 hydrocarbons with different molecular structures using high-pressure micro-reactor with GC-MS/FID

Convective Heat Transfer and Pressure Drop Characteristics of Near-Critical-pressure Hydrocarbon Fuel in a Minichannel

Influence of Secondary Reactions on Heat Transfer Process During Pyrolysis of Hydrocarbon Fuel under Supercritical Conditions

Buoyancy Effect on Heat Transfer and Surface Coking of Hydrocarbon Fuel in Horizontal Square Channel at Supercritical Pressures

Multi-dimensional modelling and analysis of heat transfer of pyrolytic hydrocarbon fuel at supercritical pressures

Investigation of the Composition and Laminar Flame Speed of Pyrolysis Gases

Heat Transfer and Thermal Cracking Behavior of Hydrocarbon Fuel