Abstract:Fire is the most frequent hazard to buildings. The current design methods for predicting the temperatures of structures in fire are originally developed for the standard fire that assumes a uniform gas temperature field and are invalid for natural fires with high non-uniform gas temperature fields. Localized fire is a typical natural fire with high non-uniform gas temperature field, which is often considered in fire safety design. There are currently no validated simple general models for calculating the heat transfer from localized fire to exposed structures. To address the need of design method, this paper develops a refined cylinder fire model for calculating the incident radiant heat fluxes on horizontal structural members inside and outside the flame region of a localized fire. The model uses a cylinder, centered at the fire plume axis, to represent the localized fire. The height of the cylinder is not fixed, different to any other fire models. The temperatures in the cylinder are highly non-uniform in three dimensions and are determined based on the classic fire plume theory. For radiation calculation, the cylinder is evenly divided into several elements along the radius and height. Each element is assumed to be a homogenous, isotropic, and absorbing-emitting (participating) graybody. By careful consideration of the spatial gas temperature distribution, the radiation properties (emissivity and transmissivity) of the elementary graybody, and the configuration factor between the elementary graybody and the horizontal target surface, the model can get relatively accurate and conservative incident radiant heat flux. The relative deviations against both the experiment data and numerical results are within ± 30 %. The model introduces a new concept of calculating the heat fluxes from fire to structures, is a relatively simple general model (compared with the sophisticated computational fluid dynamics models), and is more precise and accurate than other simple ones. The model is recommended for use in performance-based fire safety design.

Heat transfer in a cylinder sheathed by flame-resistant fabrics exposed to convective and radiant heat flux

Numerical investigation of the influence of thermal protective fabric deformation on heat transfer from thermal radiant heat to human skin

Numerical Simulation of the Effects of Blood Perfusion, Water Diffusion, and Vaporization on the Skin Temperature and Burn Injuries

Numerical study of heat and moisture transfer in thermal protective clothing against a coupled thermal hazardous environment

A refined cylinder fire model for thermal radiation calculation from localized fire to exposed horizontal surface

Human Thermoregulation and Injury Evaluation in Fire Environments: A Review

Modeling of Heat and Moisture Transfer Within Firefighter Protective Clothing with the Moisture Absorption of Thermal Radiation

Modeling of Heat Transfer through Firefighters Multilayer Protective Clothing Using the Computational Fluid Dynamics Assisted by X-ray Microtomography and Thermography

Study on different finite difference methods at skin interface for burn prediction in protective clothing evaluation

Modeling Heat Transfer In Phase Change Material Bedded Firefighting Protective Clothing Under Fire Exposure

A modified model to assess the thermal protective performance of fire-retardant clothing exposed to both flame and radiant source

Heat Transfer to an Unconfined Ceiling from an Impinging Buoyant Diffusion Flame

Evaluation of Thermal Safety in Fire Using Human Thermal Model and CFD Simulation

Effects of air gap under clothing on heat transfer from fire environment to human skin: An experimental and numerical study for firefighter safety

Prediction of thermal skin burn based on the combined mathematical model of the skin and clothing

Theoretical evaluation of burns to the human respiratory tract due to inhalation of hot gas in the early stage of fires

Assessment of Human Safety and Thermal Comfort in High-Temperature Environment: Cfd and Human Thermoregulation Model

Quantitative Assessment of the Relationship Between Radiant Heat Exposure and Protective Performance of Multilayer Thermal Protective Clothing During Dry and Wet Conditions

Rapid prediction of fire-induced heat flux on the liners of horseshoe and circular tunnels with longitudinal ventilation at critical velocity

3D Numerical Simulation for Thermal Protection of Phase Change Material-Integrated Firefighters' Turnout Gear

Modeling Thermal Insulation of Firefighting Protective Clothing Embedded with Phase Change Material