Abstract:This paper attempts to present a brief review of recent progress obtained by the author's group in the research area of ion beam metallurgy, namely (i) formation of metal-nitride by nitrogen implantation; (ii) metallic glass formation by ion mixing; and (iii) icosahedral phase formation by ion mixing. Silver- and copper-trinitrides have been formed, for the first time, by RT 80 keV nitrogen ion implantation for doses up to 2×10 18 N cm −2 . These indicated that deposition of large amounts of energy during implantation could provide the reaction energy of noble-metal-nitride with rather positive heat of formation, and that local nitrogen concentration in the implanted films could be considerably greater than that limited by the sputtering yield involved. Besides, our observation of the reverse sequence of phase transition TiTiNTi 2 N with increasing nitrogen dose suggested that growth kinetics (or structural compatibility between newly formed phase and the matrix) might be a key factor in determining the nitride formation in some systems. Two parameters were found of importance in influencing the glass forming ability (GFA) of binary metal systems. One is MPAR (maximum possible amorphization range), which equals 100% minus the maximum solid solubilities observed in the equilibrium phase diagram. The other is the heat of formation. A map was constructed by these parameters and some empirical qualifications were found to classify the systems according to GFA into three categories of Hardly (HGF), Possible (PGF) and Readily (RGF) Glass Forming systems. The FeCu system is an immiscible one, in which amorphization induced by ion mixing could only occur within a narrow composition range. The favored composition was figured out experimentally, and an icosahedral phase was also formed by ion mixing without post-annealing at corresponding atomic stoichiometry. Interestingly, a similar phase was also formed in the FeMo system.

Formation of Au-Ge Metastable Phases by Ion Mixing

Ion Mixing and Demixing in the Au-Si System

Formation of A Metastable Cubic Phase in an Immiscible Fe-Ag System by Ion Mixing

Ion-mixing-induced Amorphization in an Immiscible Au - Mo System with a Small Size Difference

Formation and structural anomaly of the metastable phases in an immiscible Ag - Mo system studied by ion beam mixing and molecular dynamics simulation

Study of metastable alloy formation by thermodynamic calculation and ion beam manipulation in an equilibrium immiscible Au–W system

Different Behaviors Of Amorphization Induced By Ion Mixing

Non-equilibrium Alloy Formation in the Ag–Zr System by Ion Beam Mixing

Interface Assisted Formation of a Metastable Hcp Phase by Ion Mixing in an Immiscible Ag-Ni System

Metastable alloys synthesised by ion mixing and thermodynamic and kinetic modelling

An Explanation of the Formation of Metastable Ag-Cr Alloy by Ion Mixing

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Atomic-scale in situ observation of electron beam and heat induced crystallization of Ge nanoparticles and transformation of Ag@Ge core-shell nanocrystals

Metastable alloys synthesized by ion mixing in immiscible Ti–Nb and Ti–Ta systems

Non-equilibrium Alloy Phase Formation and Transformation Driven by Ion Beam Mixing in the Fe-Hf-Nb Multilayers

Metastable Alloy Formation in the Immiscible Cu–Ru System by Ion Beam Manipulation

A comparative study of metastable alloy formation by ion mixing and thermal annealing of multilayers in the immiscible Y–Zr system

Formation of Quasicrystalline Phases in the Equilibrium Immiscible Co-Cu and Fe-Cu Systems by Ion Mixing/Solid-State Reaction

Phase Evolution Upon Ion Mixing and Solid-State Reaction and Thermodynamic Interpretation in the Ni-Nb System

Study Of Alloy Phase Formation Using Ion-Beams

Metastable Phases Formed by Ion Mixing in the Hf-Nb System with A Positive Heat of Formation