Abstract:The main motivation of the present work was to fabricate novel multifunctional polymer‐based nanocomposites. The nanocomposites embedded with multi‐walled carbon nanotube‐boehmite (MWCNT‐boehmite) were prepared via hot pressure casting technique. The MWCNT coated with boehmite were synthesized by hydrothermal synthesis. Subsequently, as‐prepared MWCNT‐boehmite was added into the phthalonitrile‐terminated polyarylene ether nitriles (PEN‐t‐CN) matrix in order to benefit from the synergetic effect of MWCNT and boehmite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) X‐ray diffraction (XRD), and Fourier transform infrared (FTIR) were employed to confirm the existence of MWCNT‐boehmite in our article. Furthermore, the structures, fracture morphologies, thermal, mechanical and dielectric properties of the nanocomposites were investigated, respectively. SEM images indicated that the MWCNT‐boehmite was homogeneously dispersed in the polymer, which acted as an essential factor to ensure good physical properties. The TGA analysis showed that the incorporation of MWCNT‐boehmite enhanced the thermal stability of the nanocomposites with initial degradation temperature (Tid) increasing from 458 to 492°C, while that of the pure PEN‐t‐CN was 439°C. The mechanical testing proved that significant enhancement of mechanical properties has been achieved. The tensile strength of PEN‐t‐CN/MWCNT‐boehmite composites with 3 wt% MWCNT‐boehmite reached the maximum (78.33 MPa), with a 41.7 % increase compared to the pure polymer. More importantly, the unique dielectric properties were systematically discussed and the results demonstrated that dielectric properties exhibited little dependency on frequency. For the incorporation of hybrid filler, the positive impact of MWCNT‐boehmite hybrid material resulted in polymer‐based nanocomposites with enhanced physical properties. POLYM. COMPOS., 36:2193–2202, 2015. © 2014 Society of Plastics Engineers

Preparation and Characterization of Functionalized Carbon Nanotubes/Poly(Phthalazinone Ether Sulfone Ketone)S Composites

Preparation and characterization of multiwalled carbon nanotubes/poly (phthalazinone ether sulfone ketone)s composites

Hindered phenol grafted carbon nanotubes for enhanced thermal oxidative stability of polyethylene

Mechanical and Thermal Properties of Functionalized Multiwalled Carbon Nanotubes/Cyanate Ester Composite

Effect of Mwcnts Chemically Grafted with Pbpesk by Diazotization on the Mechanical Properties of Cf/Poly(Aryl Bis-Phthalazinone Ether Sulfone Ketone) Composites

Preparation and Properties of Poly (P-Phenylene Sulfide)/multiwall Carbon Nanotube Composites Obtained by Melt Compounding

Effect of functionalization of multiwalled carbon nanotubes with aminated poly(ether sulfone) on thermal and mechanical properties of poly(ether ether ketone) nanocomposites

Properties of Block Copolymer Noncovalently Modified Multi-Walled Carbon Nanotubes/Epoxy Nano-Composites

Synthesis and properties of the amino-functionalized multiple-walled carbon nanotubes/polyimide nanocomposites

Electrical Conductivity and Microwave Absorbing Properties of Nickel‐coated Multiwalled Carbon Nanotubes/poly(phthalazinone Ether Sulfone Ketone)s Composites

Morphology and properties of functionalised MWNT/polypropylene composites

Mechanical and Thermal Properties of Functionalized Multiwalled Carbon Nanotubes and Multiwalled Carbon Nanotube–polyurethane Composites

Preparation and Characterization of Polydiphenylamine/multi‐walled Carbon Nanotube Composites

Poly(benzimidazole) functionalized multi-walled carbon nanotubes/100% acidified poly(hydroxyaminoether) composites: Synthesis, characterization and properties

Preparation and Rheological Characterization of Poly(methyl Methacrylate)/functionalized Multi-Walled Carbon Nanotubes Composites

Functionalized Carbon Nanotubes with Phosphorus- and Nitrogen-Containing Agents: Effective Reinforcer for Thermal, Mechanical, and Flame-Retardant Properties of Polystyrene Nanocomposites

Enhanced Properties of Phthalonitrile‐terminated Polyarylene Ether Nitriles Embedded with Hybrid MWCNT–boehmite Nanocomposites

Functionalization of multi-wall carbon nanotubes with silane and its reinforcement on polypropylene composites

In Situ Polymerization Approach to Poly(arylene Ether Nitrile)-Functionalized Multiwalled Carbon Nanotube Composite Films: Thermal, Mechanical, Dielectric, and Electrical Properties

Preparation, Structure, and Property of Polyoxymethylene/Carbon Nanotubes Thermal Conducive Composites

Preparation, Structure and Properties of Thermoplastic Olefin Nanocomposites Containing Functionalized Carbon Nanotubes