Abstract:The influence of various sulphur-oxygen (SO) group additives has been investigated in retarding the self-corrosion of Al anode in a 4M KOH solution, in order to effectively enhance the overall performance. The studied additives in this work were all found to be capable of decreasing H2 evolution, and could mitigate aluminium self-corrosion, with the corrosion inhibition towards the cathodic protection process. The less pitting corrosion and holes were observed for inorganic additives in comparison to the organic counterparts. The Al-air batteries demonstrated an improvement in the discharge capacities: 2604, 2393, 2348 and 2048 mAhg−1 for Na2SO4, Na2SO3, C2H6SO, and C6H5SO2OH, respectively, in comparison to that associated with the 4M KOH (2021 mAhg−1). K2S2O8, an inorganic additive, exhibited a hydrogen evolution efficiency of 21%, but the lowest discharge performance (1973 mAhg−1). This may be due to the instability of the anions in redox reactions. The low inhibition efficiency of the hybrid additives in Al self-corrosion, when compared to single additives, may be ascribed to the involvement of Al3+ in complex formation of the inorganic-organic hybrid additives. A stable discharge-charge cycling test over 6 h with a voltage gap of around 0.7 V is observed for Na2SO4, demonstrating the efficient performance compared to the additive-free KOH electrolyte. It could be concluded that efficient additives containing SO group, successfully mitigated the self-corrosion and hydrogen evolution associated with the Al anode that was confirmed with DFT results.

Influence of Electrolytic Component to the Performance of Al/AgO Battery

Effects of NaAlO2 on Structure and Corrosion Resistance of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Phosphate–koh Electrolyte

Discharge performance of the Al–Mg–Sn alloy anodes with different Sn content for Al-air batteries

The influence of Sn content on the electrochemical performance and discharge characteristics of Al-0.2Mg-0.02In-xSn-0.02Bi alloy anodes in aluminum-air batteries

Effects of Solid-Solute Magnesium and Stannate Ion on the Electrochemical Characteristics of a High-Performance Aluminum Anode/electrolyte System

Improvement of electrochemical performance with amphoteric surfactants for Al anode of Al-air battery in alkaline system

The Effects of Surface Treatment and Stannate As an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol–water Solution

Synergistic effect of 8-aminoquinoline and ZnO as hybrid additives in alkaline electrolyte for Al-air battery

The Discharge and Corrosion Behavior of Al Anodes with Different Purity in Alkaline Solution

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Anode Interfacial Layer Construction Via Hybrid Inhibitors for High-Performance Al-Air Batteries.

Effect of Additives on Performance of Alkaline Silver-Zinc Battery

Effects of flocculant and corrosion inhibitor compounding on the electrochemical corrosion behavior of the anode in Al-air batteries

The role of SO-group-based additives in improving the rechargeable aluminium-air batteries

Impact of Li-ions and CO2 on the electrochemical efficiency of Al and Al-4%Sn in KOH electrolyte for alkaline batteries application

Dissolution of Nanoprecipitate on Aluminum-Alloy Anode for High Discharging Performance in Al Battery Applications

The Influences of Silver and Zinc Addition on the Electrochemical Performances of the Pb–Ca–Sn Grids for Lead Acid Batteries

Effect of Na2SiO3 and TEA Electrolyte Additives on the Corrosion Inhibition of Zinc Electrodes and Electrochemical Performance of Rechargeable Alkaline Manganese Batteries

The effect of AlF3 as an electrolyte additive on Li anode in Li-O2 batteries

A high-purity AgO cathode active material for high-performance aqueous AgO–Al batteries

Enhancing the Electrochemical Performance of Al-Mg-Sn-Ga Alloy Anode for Al-Air Battery by Solution Treatment