Abstract:This study demonstrates the synthesis of a covellite–polyvinylpyrrolidone nanocomposite matrix using a solution processing approach and the growth of zinc oxide nanorods on an Indium tin oxide coated polyethyleneterephthalate substrate. The study reveals the impact of covellite–polyvinylpyrrolidone on the optoelectronic performances of zinc oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate), showing enhanced conductivity and improved photo‐response. The findings suggest potential applications in self‐powered photo‐detection, solar cells, and advanced sensors. A nanocomposite matrix of covellite–polyvinylpyrrolidone (CuS–PVP) was synthesized through a solution processing method and applied via spin coating onto hydrothermally grown zinc oxide (ZnO) nanorods. Characterization techniques, including X‐ray powder diffraction and scanning electron microscopy, confirmed the successful decoration of chain‐like CuS–PVP polymer composites onto hexagonal ZnO nanorods. The UV‐vis spectroscopy revealed an absorption peak at 372 nm, indicating excitonic absorption of ZnO, and a reduction in the band gap from 3.11 to 2.59 eV upon CuS–PVP polymer decoration, enhancing light harvesting efficiency. Photoluminescence spectra demonstrated the lowest charge carrier recombination rate in the ZnO/CuS–PVP sample, promoting efficient charge separation and transportation, supported by Fourier‐transform infrared analysis indicating chemical bonding. Subsequently, the impact of CuS–PVP as an insertion layer in the ZnO/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) inorganic–organic heterojunction was investigated. Favorable band alignment between ZnO, CuS–PVP, and PEDOT:PSS improved conduction, increasing current from 0.3394 to 1.14 mA for D2 (poly‐ethyleneterephthalate/Indium tin oxide/ZnO/PEDOT:PSS/Al) and D1 (poly‐ethyleneterephthalate/Indium tin oxide/ZnO/CuS–PVP/PEDOT:PSS/Al) at a +2 V bias. Transient photo‐responses (J–t) at 0 V bias revealed decreased rise and fall times from 0.382 and 1.154 s to 0.301 and 0.229 s for D2 and D1 devices, respectively. This novel approach provides control over charge carrier transport characteristics at the interface, potentially benefiting self‐powered photo‐detection in optoelectronic devices.

Bonding Polyether Onto Zno Nanoparticles: An Effective Method For Preparing Polymer Nanocomposites With Tunable Luminescence And Stable Conductivity

Organic Functionalization and Properties of ZnO Nanosheets with Polymer Containing N-Vinyl Carbazole

Polymer-Gel-Derived PbS/C Composite Nanosheets and Their Photoelectronic Response Properties Studies in the NIR

Highly Luminescent, Homogeneous Zno Nanoparticles Synthesized Via Semiconductive Polyalkyloxylthiophene Template

Photoluminescent Zno Nanoparticles Modified by Polymers

Enhancing the linear and nonlinear optical properties by ZnS/V-doped polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol polymeric nanocomposites for optoelectronic applications

New Polymer-Inorganic Nanocomposites: Peo-Zno And Peo-Zno-Liclo4 Films

Preparation and characterization of a semi-interpenetrating network gel polymer electrolyte

In Situ Preparation and Fluorescence Quenching Properties of Polythiophene/zno Nanocrystals Hybrids Through Atom-Transfer Radical Polymerization and Hydrolysis

New Polymer−Inorganic Nanocomposites: PEO−ZnO and PEO−ZnO−LiClO<sub>4</sub>Films

Study on the Electrical Properties of Peo-Nanosized Zno Composites

Stable Aqueous Zno@Polymer Core-Shell Nanoparticles with Tunable Photoluminescence and Their Application in Cell Imaging

Synthesis, optimization and applications of ZnO/polymer nanocomposites

Developing polymer nanocomposite films of ZnO/NiFe 2 O 4 nanohybrids, polyvinyl pyrrolidone, and chitosan for flexible electromagnetic applications and energy storage devices

Preparing ZnS nanoparticles on the surface of carboxylic poly(vinyl alcohol) nanofibers

Preparation and electrochemical behaviors of composite solid polymer electrolytes based on polyethylene oxide with active inorganic-organic hybrid polyphosphazene nanotubes as fillers

Electroluminescence From Doped Zns Nanocrystals Polymer Composite Systems

Liquid Polymer Nanocomposites PEGME−SnO2 and PEGME−TiO2 Prepared Through Solvothermal Methods

Enhancement of electrical properties by CuS–PVP nanocomposite on the ZnO/polymer heterojunction

A Strategy for Preparing Solid Polymer Electrolytes Containing In Situ Synthesized ZnO Nanoparticles with Excellent Electrochemical Performance

Solution route to inorganic nanobelt‐conducting organic polymer core‐shell nanocomposites