Experimental Study on Flow Characteristics in Rectangular Microtube

王樱,刁彦华,赵耀华

DOI: https://doi.org/10.3321/j.issn:0253-231x.2009.05.033

2009-01-01

Abstract:Polar liquid distilled water, ethanol and nonpolar liquid R113 were used as the testing fluids, and let them flow through a rectangular microtube which was made of copper by crystal growth method with the relative roughness of 1.40%, the hydraulic diameter of 170.37 μm and the aspect ratio of 0.66, the relation of Reynolds number and friction factors, the relation of Reynolds number and Poiseuille number, and the relation of Reynolds number and gradient pressure were calculated from the measurement of the inlet and outlet parameters and the fluid flow velocities. The experimental results indicate that the polarity of the testing fluid is negligible during the Reynolds numbers range from 43.17 to 4 091.5, and it also demonstrates that the microtube with relative roughness of 1.4% almost does not influence the frictional characteristics in the laminar region; when the Reynolds number is below 1 600～1 800, the experimental data for frictional factors of all the testing fluids flow agrees well with the theoretical correlation presented, when the Reynolds number is over the range of 1600～1800, the frictional factors deviate from the theoretical correlations,so the transition to turbulent flow is validated.