The Integrated DNC System Oriented to CIMS

WANG Yong-hong

DOI: https://doi.org/10.3969/j.issn.1671-5276.2006.05.037

2006-01-01

Abstract:This paper discusses the definition and the producing background of integrated DNC.A simple and effective project of integrated DNC system is presented here,and described the key technology of this system is in detail.

What problem does this paper attempt to address?

Research on DNC Integrated Machining System

Yu-feng ZHANG,Yue-hong DAI,Yu-hua CHENG,Zhong-xian LUO

DOI: https://doi.org/10.3969/j.issn.1673-159X.2005.01.009

2005-01-01

Abstract:This paper discusses some functions and foundational structure and describes some features and key technology of DNC integrated machining system.Finally,a prototype system is built up on the basis of the idea.
Research and Implementation of CIMS Architecture for PCB Manufacturing

PAN Xue-zeng,HUANG Yi-min,PING Ling-Di,WU Peng

DOI: https://doi.org/10.3969/j.issn.1006-5911.2000.05.016

2000-01-01

Abstract:According to the characteristics of the PCB manufacturing industry, this paper proposes a general functional model and a systematic informational integrated model which is suitable for the PCB manufacture. This paper emphasizes manufacturability analyses system and the schedule optimization of the cluster driller system .It has been proved that this scheme is very effective and can provide a reference paradigm for the same kind of enterprises to implement their CIMS.
PCB-CAM INTEGRATED SYSTEM DESIGN BASED ON CONCURRENT ENGINEERING TECHNOLOGY

CHEN Yu,PING Lin-di,PAN Xue-zheng,Li Jiang-bo

2000-01-01

Abstract:Printed Circuit Board Computer Aided Manufacture (PCB CAM) System is the key system in the production process for the modern printed circuit manufactory. In this paper, with the introduction of implement of the second stage of the CIMS model project of HangZhou TriUnion Electronic Co. Lmt,the PCB CAM design based on the Concurrent Engineering technology is presented. This paper also proposes how to integrate the upper stream and low stream information strategically in the application of the technology.
Information Integrated Technology for Small and Medium-sized Mechatronic Enterprise Based on Warehouse Management

Liu Sainan,Ke Yinglin,Yu Fengjie

DOI: https://doi.org/10.3321/j.issn:1004-132X.2007.11.017

2007-01-01

Abstract:An information integrated architecture for small and medium-sized mechatronic enterprise was proposed. It was based on warehouse management through analysis of production features in modern mechatronic enterprises in China. Enterprise information management system, dispatching system, simulation system and warehouse automatization system were effectively integrated according to this architecture. The integrated architecture was discussed in detail. The function and framework of sub-systems were discussed in further. Three CIMS key technologies were proposed in building this architecture. They were good-location coupling assignment based on mapping, dispatching assignment based on task-disassemble and multilayer architecture technology based on B/S mode. Their principles, method and implementation were discussed in detail. At last, a software system named DOWMS was built on this architecture. It is implemented in a small and medium-sized mechatronic enterprise. The progress is realized with higher production, increasing sales level and improving service level.
Strategies For the Development and Application of CIMS

Xiao-dong WANG,Gang RONG,Xiao-ming JIN

DOI: https://doi.org/10.3969/j.issn.1001-4551.2000.03.037

2000-01-01

Abstract:This paper briefly describes difference between the development and application of CIMS and those of DCS. Base on the analysis of enterprises, life cycle, system architecture, technical support and innovation in development of CIMS. The strategy for the development and application of CIMS are presented.
Web-Services-based Design and Implementation of DNC/PDM System Integration

SHI Feng-gai,ZHOU Bing-hai,XI Li-feng,FU Shi-wei

DOI: https://doi.org/10.3969/j.issn.1007-5429.2006.05.019

2006-01-01

Abstract:In this paper,through the description of the Web-Service-based integration framework of PDM and DNC,such an integration of PDM and DNC is implemented under Windows 2000 professional and JAVA environment.
An Integrated Manufacturing System for Mass Customization

Xinsheng Xu,Shuiliang Fang,Xinjian Gu,Xiangbing Xu

DOI: https://doi.org/10.1109/wcica.2006.1714397

2006-01-01

Abstract:In order to increase productivity, integrated manufacturing as a kind of strategy has become more and more important. A conceptual model of integrated manufacturing was proposed. Focusing on the numerical control machining of customized product, the integrated manufacturing principle for mass customization was discussed and architecture model of an integrated manufacturing system was presented as well. Firstly, the master model and master NC (numerical control) program of customized product were built. Then these manufacturing resources were unified managed in the PDM (product data management) system. Based on these resources, variant design of customized product could be carried out, at the same time NC machining program of customized product could be generated rapidly. Secondly, NC machining program was input into the NC machining tool through a DNC (distributed numerical control) system, and then remote machining and control would be realized. By adopting this integrated manufacturing system, company can implement mass customization production effectively
The Integrating Techniques of Multi-Database in CIMS Enterprise

DENG Sheng-chun,XU Xiao-fei,WANG Nian-bin,WANG Gang

DOI: https://doi.org/10.3969/j.issn.1006-5911.2001.01.004

2001-01-01

Computer Integrated Manufacturing Systems

Abstract:CIMS (Computer Integrated Manufacturing System) is a very complicated system, and there are a variety of distributed, autonomic, heterogeneous databases in integrated enterprises, hence it plays an important role in CIMS enterprise to integrate these heterogeneous information effectively. Based on the prototyped CIMS integrating platform named HIT-IIS which was developed in Harbin Institute of Technology, we design a scheme to extend the function of information server in HIT-IIS. This paper introduces the schema structure and Client/Server-based system architecture of Multi-database for CIM Integrated Platform, the concept and function structure of MDBI (Multi-database Integrator) are also proposed.
Study on DNC System of LAN Framework Oriented Serial Communication CNC

闫伟国,王敏杰,王敏锐

DOI: https://doi.org/10.3969/j.issn.1005-2402.2004.01.029

2004-01-01

Abstract:On the basis of analyzing communication technology of DNC system, LAN framework DNC system oriented serial communication CNC is presented. This communication technology has the advantage of low cost and simple framework layer. The hardware structure, software structure and information integration of this system are described. The kernel of DNC controller is designed.DNCSystemofLA
Corporation production information control system based on intranet

Gu Xin-jian

2002-01-01

Abstract:With the rapid development of the Internet technology, many corporations have changedtheir idea on production and management. Through investigation into the intranet of theCar Bracket Branch of the DongFeng Corporation, we developed the CorporationProduction Information Control System (also named the COPICS System). This systemcan be used to manage supply, sale, storehouse, technology and costs, and to makemanufacturing plan, which helps the enterprise to realize computer-management, reduceits managing tache in the course of production and promote its market-reacting capacityand competitive power.
Manufacturing Enterprises Oriented PDM Global Information Integration System

黄利平,李建明,冯升华,许隆文

DOI: https://doi.org/10.3321/j.issn:1003-8728.2001.05.057

2001-01-01

Abstract:Aiming at information integration in manufactu ring enterprises, a kind of general method and technology which implements infor mation integration among design, management and production is researched. From r equirements of information integration in enterprises, we analysed and built the product shared information model of manufacturing enterprises. Then, the archit ecture of CIMS application integration platform is presented, which is composed of global information system(GIS), PDM system(integrated CAx systems), managemen t information system(MIS) and workshop controller. We also designed a PDM global information integration system(PDM-GIIS),which includes PDM software(IMAN), de veloped PDM customization automatism program(PDM-CAP), developed PDM-GIS globa l integration interface(PDM-GIS-GII) and developed engineering information map ping management tool(EIMMT). The design principles of GIS database, PDM-CAP, PDM-GIS-GII and EIMMT were expounded. And then, the architecture of PDM -GIIS was built and the functions of each part were shown. Finally, the key technolog ies for developing the system such as information integration technology based O DBC on different operator system and different database, the mapping technology between GIS model and PDM model were discussed.In the end the system implementat ion environment was provided.
Research on CAD/PDM Integration for MC and Its Key Technologies

XU Xin-sheng,FANG Shui-liang,LI Qiang,GU Xin-jian

DOI: https://doi.org/10.3969/j.issn.1009-0134.2006.09.002

2006-01-01

Abstract:In order to better support product development and design for Mass Customization (MC), the key integration technologies of Computer Aided Design (CAD) and Product Data Manage- ment (PDM) system were studied. Focusing on the data integration of part, the data model of part family and data mapping logic of CAD and PDM systems integration were discussed. The system integration architecture was put forward as well. Then several main function interfaces were developed including coding module interface, setting up tabular layouts of article characteristics and registration interface from CAD model to PDM. Finally, an application example was provided to verify the feasibility of principle and system.
SCC-ProModeling: a practical tool for integrated product modeling

Peng Gao,Lanfen Lin,Ming Cai,Jinxiang Dong

DOI: https://doi.org/10.1109/WCICA.2004.1342097

2004-01-01

Abstract:To realize data integration and process integration in contemporary integrated manufacturing system (CIMS), a framework of integrated product mode (IPM) is presented. This framework is composed of master model (MM) and domain model (DM). By building a model for extracting DM from MM, the reusability of IPM is improved significantly. In addition, a software prototype for integrated product modeling is developed-SCC-ProModeling, which is pretty practical as it can integrate legacy systems effectively. Finally, the key technologies of SCC-ProModeling are discussed. SCC-ProModeling has been applied successfully to the "Model Project" of Chinese aerospace area.
Integrated Modeling Technology of CIMS in Process Industry

XIONG Gang,LI Yang-chun,XU Xiao-ming,SUN You-xian

DOI: https://doi.org/10.3321/j.issn:1006-2467.1999.05.026

1999-01-01

Abstract:Integrated modeling and overall optimization are one of the key theories and technologies of CIMS in process industry. Integrated modeling was mainly discussed. The modeling requirements were analyzed , and several modeling methods were summarized. Based on it, an integrated modeling strategy and an integrated modeling environment were put forward respectively.
Design and Implementation of the Real Time Control for DNC System in FMS

余传猛,周炳海,奚立峰,傅仕伟

DOI: https://doi.org/10.3969/j.issn.1007-5429.2004.04.004

2004-01-01

Abstract:To control multiple numerical control(NC) machine tools in a distributed numerical control (DNC) system in flexible manufacturing system(FMS) in real time, the paper describes the FANUC DNC2 protocol in detail by use of the model of 5 layers OSI net protocol, suggests a design method of real time control program for DNC by use of the oriented-object technique, builds up a hardware structure for the DNC system. And a DNC software has been developed. Application indicates that the DNC sof tware is reliable and can be easily operated.
Introduction to Jingwei CIMS engineering project

Tianyuan Xiao,Qinfen Guo,Gao Yuan

1997-01-01

Abstract:The CIMS (computer integrated manufacturing system) engineering project of Jingwei Textile Machinery Co has passed the examination by National CIMS Expert Group and the appraisal organized by Chinese Textile Committee, evaluating that it has reached the 1990s advanced international technical level. This paper introduced the background and implementation process of JW-CIMS together with its architecture.
Integrated Modeling Method in CIMS Manufacturing System Designing and Developing

De-guang CUI,Peng CHENG,Tian-cheng XIANG

DOI: https://doi.org/10.3969/j.issn.1006-5911.2000.06.008

2000-01-01

Abstract:This paper has summarized the traditional methods on MIS designing and developing according to the practical CIMS applications, and has brought forward a new integrated modeling method based on it, namely the three stages and nine models method. This method is the reinforcement and improvement to the System Development Life Cycle method.
CIMSNET-An Internet-Based Platform for Contemporary Integrated Manufacturing

刘连臣,张霖,杨吉江,吴澄,肖田元

DOI: https://doi.org/10.3969/j.issn.1006-5911.2001.05.002

2001-01-01

Abstract:CIMSNET (Contemporary Integrated Manufacturing System Network) is a Virtual Private Network based on three Chinese backbone networks — CHINANET、CERNET and CSTNET, which provides information sharing, resource sharing remote consultation, training and supporting enviroment for AE (Agility Engineering) and EC (Electronic Commerce) . This paper introduces the primary object of CIMSNET, its physical infrastructure and logical architecture. Then the primary functions of CIMSNET are also represented and some main keytechnology are invdved.
Design of Integrated EMS/DTS System Based on IEC 61970

WU Wen-chuan,SUN Hong-bin,ZHANG Bo-ming,WANG Zhi-nan,YAN Ya-qing,SHAO Li-dong,LIU Chong-ru,WANG Hao

DOI: https://doi.org/10.3321/j.issn:1000-1026.2005.04.011

2005-01-01

Abstract:IEC 61970 is one of the most important standards of the new-generation EMS/DTS system. This paper proposes the key technical issues in developing the EMS/DTS system based on IEC 61970. The methods for implementing the database platform, CIM model. EMS API and heterogeneous supporting system are discussed. First, a heterogeneous database platform composed of database and soft-bus is proposed. Then three types of database management modes are adopted in the background database to store, retrieve and process data, in which the architecture guarantees the openness and efficiency of the system. Then the soft-bus, based on the real-time CORBA middleware, supports the CIS standard in an all-round way. Secondly, a WYSWYG(What you see is what you get) method for power system modeling, firmly compliant with CIM, is presented. Furthermore, different strategies are applied to wrap the legacy EMS/DTS modules. It is shown by test results that this strategy is feasible.
A Web Services-based Solution for the Integration between PDM System and DNC System

Li Chunchang,Xi Lifeng,Zhou Binghai,Shi Fenggai,Wu Dezhong

2006-01-01

Abstract:In order to meet the small and medium sized enterprises' requirements of inter-enterprise integration in networked manufacturing environment,a Web Services-based solution which is economical,extensible and loosely coupled is presented for the integration between PDM system and DNC system.The solution may provide reference to the integration between enterprise top-level application systems and shop floor control systems.It can be applied to both intra- and inter-enterprise integration in networked manufacturing environment.

The Integrated DNC System Oriented to CIMS

Research on DNC Integrated Machining System

Research and Implementation of CIMS Architecture for PCB Manufacturing

PCB-CAM INTEGRATED SYSTEM DESIGN BASED ON CONCURRENT ENGINEERING TECHNOLOGY

Information Integrated Technology for Small and Medium-sized Mechatronic Enterprise Based on Warehouse Management

Strategies For the Development and Application of CIMS

Web-Services-based Design and Implementation of DNC/PDM System Integration

An Integrated Manufacturing System for Mass Customization

The Integrating Techniques of Multi-Database in CIMS Enterprise

Study on DNC System of LAN Framework Oriented Serial Communication CNC

Corporation production information control system based on intranet

Manufacturing Enterprises Oriented PDM Global Information Integration System

Research on CAD/PDM Integration for MC and Its Key Technologies

SCC-ProModeling: a practical tool for integrated product modeling

Integrated Modeling Technology of CIMS in Process Industry

Design and Implementation of the Real Time Control for DNC System in FMS

Introduction to Jingwei CIMS engineering project

Integrated Modeling Method in CIMS Manufacturing System Designing and Developing

CIMSNET-An Internet-Based Platform for Contemporary Integrated Manufacturing

Design of Integrated EMS/DTS System Based on IEC 61970

A Web Services-based Solution for the Integration between PDM System and DNC System