Abstract:Annular centrifugal contactors (ACCs), which use centrifugal force to separate the dispersion of two immiscible liquids of different densities, have been utilized in many industrial fields, such as the petroleum, hydrometallurgy, wastewater treatment, pharmaceutical processing, protein extraction, enantioselective chemical separation, biodiesel synthesis, and nuclear industries. Detailed hydrodynamic information, such as the liquid hold-up volume and the interface radius, is very important for successful design and operation of ACCs. A new method, namely, the liquid-fast-separation method, was developed to (1) obtain the parameters of the liquid hold-up volume, the actual phase ratio (aqueous phase/organic phase, a/o) of two phases in the mixing zone, and the interface radius, and (2) investigate the effects of the rotor speed, the total flow rate, the flow ratio (a/o), and the diameter of the heavy phase weir on these parameters. The experimental results indicated that the parameters of the liquid hold-up volume, the actual phase ratio (a/o) of two phases in the mixing zone, and the interface radius could be obtained using the liquid-fast-separation method. Moreover, the effects of the rotor speed, the total flow rate, the flow ratio (a/o), and the diameter of the heavy phase weir on these parameters could also be obtained. These results provide a more complete understanding of the fluid flow in ACCs to enable further advancements in their design and operation.

Axial Mixing in an Open Turbine Rotating-Disk Contactor for A Solid Liquid Liquid-System

HYDRODYNAMICS AND AXIAL MIXING OF LIQUIDSOLID SYSTEM IN OPEN TURBINE ROTATING DISC CONTACTOR

Hydrodynamics, Axial Mixing and Mass Transfer in Open Turbine Rotating Disc Contactor (OTRDC)

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Numerical Study on the Synergistic Mechanism of Coaxial Mixers in Dense Solid-Liquid Mixing Systems

Numerical Study on Solid Suspension Characteristics of a Coaxial Mixer in Viscous Systems

Experimental Study on Micromixing Characteristics of Coaxial Mixer in Solid–Liquid Systems

Experimental Investigation on Drawdown of Floating Particles in Viscous Systems Driven by Coaxial Mixers

Experimental Study on Coaxial Mixer Based on Critical Uniform Dispersion of Floating Particles

Numerical investigation on the intensification of coaxial slurry mixing systems

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Hydrodynamics And Mass Transfer Performance In A Modified Rotating Disc Contactor

Experimental Study on Gas–liquid Dispersion and Mass Transfer in Shear-Thinning System with Coaxial Mixer

Axial Mixing and Mass Transfer Characteristics of Pulsed Extraction Column with Discs and Doughnuts

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

Experimental study on gas-liquid flow regimes of coaxial mixers equipped with a Rushton/pitched blade turbine and anchor

Model and Experimental Study of Relationship Between Solid Fraction and Back-Mixing in a Fluidized Bed

On the Effect of Axial Inlet Angle on the Droplet Size Distribution and Mixing Uniformity for Swirl Jet Mixer at High Phase Ratios

Determination of the Liquid Hold-Up Volume and the Interface Radius of an Annular Centrifugal Contactor Using the Liquid-Fast-Separation Method

Characterization of axial and radial liquid mixing in a liquid-solid circulating fluidized bed

Backmixing characterization of liquid phase in ebullated bed reactor