Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Characterization of axial and radial liquid mixing in a liquid-solid circulating fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Evaluation and Characterization of Axial Distribution in Expanded Bed: II. Liquid Mixing and Local Effective Axial Dispersion

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Research on Separation Mechanism of Liquid-Solid Fluidized Bed Separator

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Experimental research on solids oscillation circulation behavior in circulating fluidized bed

Liquid dispersion in gas-liquid-solid circulating fluidized beds

Lateral Solids Mixing In The Dense Zone Of A Circulating Fluidized Bed

Lateral and Axial Mixing of the Dispersed Particles in CFB.

Phase Holdup and Liquid Dispersion in Gas-Liquid-Solid Circulating Fluidized Beds

Dispersion of lateral and axial solids in a cocurrent downflow circulating fluidized bed

Radial profile of the solid fraction in a liquid-solid circulating fluidized bed

Discrete Element Study of Solid Circulating and Resident Behaviors in an Internally Circulating Fluidized Bed

CFD modelling and simulation of hydrodynamics in liquid-solid circulating fluidized beds

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Gas Mixing In The Cocurrent Downflow Circulating Fluidized-Bed

Gas and Solids Mixing in A Turbulent Fluidized Bed