Abstract:Poly(L‐lactide) (PLLA), poly(D‐lactide) (PDLA) and poly(methyl methacrylate) (PMMA) are melt blending with various content of PDLA (0 and 3 wt%) and PMMA (0–20 wt%). The blending pellets then undergoes the melt spinning and hot drawing process to prepare PLA composite fibers. The hydrolysis resistance of fibers is improved by the addition of PMMA and the mechanical property and heat resistance properties increased for the highly oriented crystalline morphology induced by the stereocomplex crystals (SC), which have formed in PLLA/PDLA/PMMA fibers. The SC nanofibrils are detected from the surface morphology of PLLA/PDLA/PMMA fibers after hydrolysis at 60°C for 132 h in NaOH solution. Polylactic acid/poly(methyl methacrylate) (PLA/PMMA) composite fibers with high performance were fabricated using melt spinning technique. The crystallization, lamellae orientation and physical properties of composite fibers were investigated systematically. The addition of PMMA (0–20 wt%) has improved the hydrolysis resistance of composite fibers by preventing water molecules from penetrating and diffusing through the fibers, but the strength and heat resistance were reduced at the same time. The stereocomplex crystallites (SC) formed before spinning by introducing poly(D‐lactide) (PDLA) (3 wt%) in poly(L‐lactide) (PLLA) matrix and acted as nucleating agents to enhanced the crystallization and lamellae orientation of PLLA matrix, which improved the physical properties of PLA composite fibers resultful. The tensile strength of PLA fibers with 3 wt% PDLA and 5 wt% PMMA was increased 31% as well as the boiling water shrinkage and the hydrolysis rate were decreased 30% and 33% in relation to PLLA fibers. Finally, the hydrolysis resistance was further enhanced on the basis of realizing high strength and heat resistance, which is of great significance for preparing durable PLA fiber materials and expanding their application.

PREPARATION OF HIGH-VISCOSITY POLY(LACTIC ACID)

High‐viscosity Polylactide Prepared by in Situ Reaction of Carboxyl‐ended Polyester and Solid Epoxy

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Preparation of High–viscous Poly(butylene succinate)

Preparation and properties of the crosslinked poly( L -lactide) with high crystallinity and high gel content

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Progress in the Improvement of Melt Strength of Poly(lactic Acid)

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Molecular Structure Design and Epoxy Functional Modification of Star-shaped Poly(lactic Acid) by Melt Polycondensation Strategy

Preparation and Performance of Poly(lactic Acid)-Wood Flour-Glycidyl Methacrylate-g-Ethylene-Octene Copolymer Composites

Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure Through Γ-Radiation-induced Chemical Reactions

Highly Toughened and Heat-Resistant Poly(lactic acid) with Balanced Strength Using an Unsaturated Liquid Crystalline Polyester via Dynamic Vulcanization

Scalable Preparation of Complete Stereo-Complexation Polylactic Acid Fiber and Its Hydrolysis Resistance

Synthesis, Properties, and Enzymatic Hydrolysis of Poly(lactic acid)-co-Poly(propylene adipate) Block Copolymers Prepared by Reactive Extrusion

Improving Melt Strength of Polylactic Acid

Preparation and Characterization of PLA /EMAG Blends

A New Strategy for the Preparation of Fully Biobased and Biodegradable Polylactic Acid with Both High Rigidity and Flexibility

Effect of polycarbodiimide, epoxy chain extenders and tannic acid on the hydrolysis and UV resistance of polylactic acid

Preparation and Properties of LLDPE/PMVS Blends

Mechanical Characteristics and Barrier Properties of Polylactic Acid Films Prepared by Casting Method

One-pot preparation of thermosensitive polylactic acid materials by modifying with N-Isopropyl acrylamide