Abstract:A mild steel-friction self-centering damper with a hybrid energy-dissipation mechanism (MS-SCFD) was proposed, which consisted of a mild steel, frictional, dual-energy-dissipation system and a disc spring resetting system. The structure and principle of the MS-SCFD were explained in detail while the restoring force model was established. The hysteretic behavior of the MS-SCFD under low-cycle reciprocating loading was modeled. Then, the influence of parameters such as the disc spring preload, the friction coefficient, and the soft-steel thickness on the mechanical properties of the MS-SCFD was investigated. The results indicate that the simulation results are basically consistent with the theoretical prediction results, with a maximum error of only 9.46% for the key points of bearing capacity. Since the MS-SCFD is provided with a hysteretic curve in the typical flag type, it will obtain the capacity of excellent self-centering performance. It can effectively enhance the stiffness, bearing capacity, and self-centering capability of the damper after the pre-pressure of the disc spring is increased. The energy-dissipation capacity of the MS-SCFD increases with the increase in the friction coefficient. However, it also increases the residual deformation of the MS-SCFD. The energy dissipation of the MS-SCFD is particularly sensitive to the thickness of mild steel. After being loaded, all components of the MS-SCFD are not damaged except for the plastic deformation caused by the yielding of the mild steel. The normal function of the MS-SCFD can be restored simply by replacing the mild steel plates after the earthquake. Therefore, it can significantly enhance the economy and applicability of the damper.

Research on New Application and Its Performance of Pall-typed Frictional Dampers

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

Hysteretic Behavior of Improved Pall-typed Frictional Dampers

Experimental research and numerical analysis of Pall-typed frictional dampers

Hysteretic Performance Test and Simulation Analysis of A New Type of Mild Steel Damper

Numerical Analysis of Hysteretic Behavior and Brace Force of Pseudo-Viscous Frictional Dampers

A friction-strip hybrid damper with multi-phase energy dissipation mechanism: Cyclic test and numerical verification

Design method for Pall-BRB frictional damping brace system

Experimental and Theoretical Investigations on an Asynchronized Parallel Double‐Stage Viscous Fluid Damper

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Computation Method of Pall-typed Frictional Damper Brace Force

Experimental and Numerical Study on an Innovative Trapezoidal-Shaped Damper to Improve the Behavior of CBF Braces

Study on the new viscoelastic damper based on bending and dislocating

Experiments and numerical prediction on a new type of mild steel damper with separable phase yielding

Experimental study on lateral performance of slotted U-shaped steel damper

The Study on Theoretical and Experimental Hysteresis of GLQW-1 Frictional Damper

Research on the Mechanical Model and Hysteresis Performance of a New Mild Steel-Rotational Friction Hybrid Self-Centering Damper

Development of A Double-Sliding Friction Damper (Dsfd)

Numerical investigation of roller steel damper for bridges

Development of Steel Dampers for Bridges to Allow Large Displacement Through a Vertical Free Mechanism

Performance Simulation Analysis and Comparison of Different Shearing Mild Steel Dampers