Abstract:Amorphous alloys exhibit unique physical and mechanical properties, which are closely connected with their microstructural heterogeneity. The correlation between structural heterogeneity and mechanical properties is one of the important issues of amorphous alloys. Micro-alloying is an effective way to tune the mechanical and physical properties of amorphous alloys. In the present study, Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) amorphous alloys with ability to form excellent glass are chosen as model alloys. The evolutions of heat flow and shear modulus in different states (as-cast, relaxed and crystalline) with temperature of Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) glass system are studied by differential scanning calorimetry (DSC) and electromagnetic-acoustic transformation (EMAT) technique, respectively. The experiment demonstrates that a decrease of the shear modulus is accompanied by the endothermic heat flow and vice versa. The correlation between the heat flow and shear modulus is investigated according to the interstitialcy theory. The calculations of the interstitialcy defect concentration and activation energy spectra suggest that the microstructure remains stable at relatively low temperatures. When temperature increases, the interstitialcy defect structure is activated. Compared with that in the as-cast state, the interstitialcy defect concentration in the relaxed state is reduced by structural relaxation, indicating that temperature-dependent shear modulus softening is inhibited. At temperatures above glass transition temperature, a rapid growth of interstitialcy defect concentration results in the accelerated shear softening, which is accompanied by significant endothermic heat flow. It is noted that the minor addition of palladium reduces the interstitialcy defect concentration in the Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) metallic glass systems. It is suggested that the introduction of Pd reduces the atomic mobility and increases the characteristic relaxation time. In parallel, the change of shear modulus as a function of the aging time (below the glass transition temperature) is studied by using EMAT equipment. The results indicate that the interstitialcy defect concentration decreases in the physical aging process, which is accompanied by an increase of shear modulus. The interstitialcy defect concentration and shear modulus change towards the quasi-equilibrium state with aging time increasing. A reduction of the interstitialcy defect concentration leads to a decrease of the shear modulus change upon microalloying by Pd into Zr50–x Cu34Ag8Al8Pdx (x = 0 and 2) metallic glass system.

Relations of the characteristic temperatures and fragility parameters in glass-forming metallic system

On Calorimetric Study of the Fragility in Bulk Metallic Glasses with Low Glass Transition Temperature: (ce0.72cu0.28)90−x Al10Fex (x = 0, 5 or 10) and Zn38Mg12Ca32Yb18

Relation of the Fragility and Heat Capacity Jump in the Supercooled Liquid Region with the Shear Modulus Relaxation in Metallic Glasses.

Superheated Liquid Fragility and Thermodynamic Refinement for Evaluation of Metallic Glass-Forming Ability

Strong Metallic Glass: TiZrHfCuNiBe High Entropy Alloy

On the glass transition in metallic melts

Kinetic Fragility of Binary and Ternary Glass Forming Liquid Mixtures.

Fragility crossover mediated by covalent-like electronic interactions in metallic liquids

Calorimetric Determination of Fragility in Glass Forming Liquids: Tf Vs. Tg-onset Methods

Strong-Superstrong Transition in Glass Transition of Metallic Glass

On the New Criterion to Assess the Glass-Forming Ability of Metallic Alloys

The Fragility of Al–Ni-based Glass-Forming Melts

Mechanical properties of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 high-entropy bulk metallic glass

Evolution of defect concentration in Zr<sub>50–</sub><i><sub>x</sub></i>Cu<sub>34</sub>Ag<sub>8</sub>Al<sub>8</sub>Pd<i><sub>x</sub></i> (<i>x</i> = 0, 2) amorphous alloys derived using shear modulus and calorimetric data

DYNAMIC RELAXATION CHARACTERISTICS AND HIGH TEMPERATURE FLOW BEHAVIOR OF ZR-BASED BULK METALLIC GLASS

Thermodynamics, kinetics and fragility of bulk metallic glass forming liquids

Quantifying the origin of metallic glass formation

Non-Isothermal Crystallization Kinetics and Fragility of (Cu46zr47al7)(97)ti-3 Bulk Metallic Glass Investigated by Differential Scanning Calorimetry

A thermodynamic connection to the fragility of glass-forming liquids

Correlation Between Fragility and Eutectic Instability and Glass-Forming Ability in Binary Metallic Glasses under Growth Controlled Conditions

Glass transition temperature of bulk metallic glasses: A linear connection with the mixing enthalpy