Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Experimental Study on Chloride Ions Penetration Resistance of Fly Ash Concrete

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Experimental Study on Chloride Ion Penetration into Recycled Aggregate Concrete

Experimental Investigation and Analytical Modeling of Chloride Diffusivity of Fly Ash Concrete.

Chloride Resistance and Binding Capacity of Cementitious Materials Containing High Volumes of Fly Ash and Slag

An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete

An experimental study of chloride diffusivity of cement paste mixed with fly ash and slag

Chloride ion penetration into fly ash modified concrete during wetting–drying cycles

Experimental Investigation and Numerical Model for Chloride Diffusivity of Long-Age Fly Ash Cement Slurry

Chloride ion penetration resistance of concrete containing fly ash and silica fume against combined freezing-thawing and chloride attack

Influence Of Composite Effect With Fiber And Fly Ash On Mechanical Properties Of Concrete And Chloride Permeability Of Concrete

Experimental study on electrical characteristics of ions in concrete at early age under electric field

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Modeling of Effect of Fly Ash Amount on Microstructure and Chloride Diffusivity of Blended Fly Ash-Cement Systems

Experimental Study on the Cracking Resistance at Early Ages of High Performance Concrete Added with Lithium Slag and Fly Ash

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Resistivity Characters of Concrete with Fly Ash and Slag

Experimental Study of Binding Capability of Chloride Ion under Stray Current in Cement Hardened Paste Admixed with Fly Ash

Study on Cement Solidification Technology in Treating with Fly Aash

Quantitative study on the influence of fly ash content, saturation degree and interface transition zone on the permeability of cement-based materials

Test Study on the Resistance of Chloride ion Penetration of Recycled Aggregate Concrete