Abstract:In this study, titanium alkoxide catalyst dependences of condensation polymerization, thermal degradation and stability were examined for a biodegradable aliphatic poly(tetramethylene succinate) (PTMS). A series of aliphatic PTMSs were synthesized through polycondensation of 1,4-butanediol and succinic acid in bulk with various amounts of titanium tetraisopropoxide (TTiPO) as the catalyst, and were further characterized by gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis. To reveal the presence and effect of catalyst residues, the crude product PTMS samples were precipitated in methanol from their chloroform solution, and were further refluxed in an acid solution to selectively hydrolyse the weak metal alkoxide moieties formed. Results of GPC analysis indicated that the original precipitated polyesters exhibited remarkably increasing molecular weights with a decrease in the catalyst/succinic acid feed molar ratio, and strong catalyst dependence of molecular weight and distribution were detected for the product polyesters. As for the acid deactivated samples, it was found that the higher the catalyst concentration used for polyester synthesis, the more remarkable was the decrease in molecular weight observed as compared with the corresponding original precipitated polyesters. Hence, a weak chain linker structure, such as (RO)nTi(OP)m with m> 1 was reasonably suggested to be included in the macromolecular architecture of polyester, where RO and P respectively express the alkoxyl moiety and polyester chain. Thermal analysis showed similar melting points and glass transition temperatures for all polyester samples. In contrast, a strong catalyst dependence of thermal degradation and stability was found for the TTiPO catalysed polyesters, and can be interpreted for the formed weak (RO)nTi(OP)m structures.

The Effect of Metal Catalyst on the Discoloration of Poly(ethylene Terephthalate) in Thermo-Oxidative Degradation

Research progress in titanium-containing catalyst for PET

Property of waste bottle‐grade polyethylene terephthalate restored by Ti‐based catalysts

Appliaction of TiO_2/SiO_2 catalyst in PET synthesis

Catalytic Amounts of an Antibacterial Monomer Enable the Upcycling of Poly(Ethylene Terephthalate) Waste

Atomic insights into the thermal degradation of polyethylene terephthalate combining STA-FTIR and DFT methods

Enhanced degradation of polyethylene terephthalate plastics by CdS/CeO 2 heterojunction photocatalyst activated peroxymonosulfate

Effect of Polycondensation Catalyst on Fiber Structure Development in High-Speed Melt Spinning of Poly (Ethylene Terephthalate)

Enhanced Photocatalytic Properties of PET Filaments Coated with Ag-N Co-Doped TiO2 Nanoparticles Sensitized with Disperse Blue Dyes

A Study on Biodegradable Aliphatic Poly(tetramethylene Succinate): the Catalyst Dependences of Polyester Syntheses and Their Thermal Stabilities

Ti-Si composite glycol salts: depolymerization and repolymerization studies of PET

Comparsion of Catalyst Effectiveness in Different Chemical Depolymerization Methods of Poly(ethylene terephthalate)

UV Pretreatment Impairs the Enzymatic Degradation of Polyethylene Terephthalate

The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

Enhanced activation of peroxymonosulfate by ZIF-67/g-C3N4 S-scheme photocatalyst under visible light assistance for degradation of polyethylene terephthalate

Metal compounds as catalysts in the intumescent flame retardant system for polyethylene terephthalate fabrics

Melting-reactive dyes for mass coloration of synthetic fibres—part I: perylene-3,4,9,10-tetracarboxylic acid dianhydride in poly(ethyleneterephthalate)

Progress in the catalytic glycolysis of polyethylene terephthalate

In-Situ Formation Of Bhet/Titanium Compound Nanocomposite And Its Catalysis For Polyester

Efficient Glycolysis of Waste Polyethylene Terephthalate Textiles over Zn-MCM-41 Catalysts