Abstract:Shape memory properties of Poly (L-lactide)/Poly (-caprolactone) (PLLA/PCL) blends reinforced with Multiwalled Carbon Nanotubes (MWCNTs) was investigated. PLLA biodegradable shape memory implants have advantages in repair and regeneration of healing tissues. One of the drawbacks of PLLAs for biomedical applications is their brittleness. One of the most practical strategies for tuning the properties of PLLA is blending with PCL. In this research, we have studied the shape memory and mechanical behavior of MWCNT/PLLA/PCL blends nanocomposites. To avoid aggregation and bundling, MWCNTs were washed with ethanol. The samples with various contents of each component were prepared by solution casting. The microstructure, mechanical properties and shape memory effect of the blends and composites were investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), polarizing optical microscopy (POM) and tensile testing. The relationship between the microstructure and shape memory properties was illuminated. Differential scanning calorimetry (DSC) of MWCNTs/PLA/PCL blends shows two glass transition temperatures (Tg) and two melting points (Tm) at positions close to the pure components revealing phase separation. The Tg and Tm of composites were increased with increasing the MWCNTs content in composites.. The XRD analysis of prepared composites shows there is a significant increase in PCL crystallization in composites by MWCNTs. The tensile tests results shows that the mechanical strength and shape recovery rate were significantly increased with increasing the MWCNTs contents in composites. The crystallinity of blend was increased with increasing the PCL in composition and in composites also the crystallinity was increased with increasing the amount of MWCNTs. The mechanical behaviour of blends and composites shows large strain after yielding and high elastic strain characteristics and exhibition good shape memory effect in which the PLLA crystal and the PCL amorphous serve as fixed phase and reversible phase, respectively. The shape recovery ratio of blend at first was decreased (15%) with increasing the amount of PCL up to 20wt%, then increased (10%) with increasing the amount of PCL until 40wt%. the shape recovery ratio of composites was increased (15%) with increasing the amount of MWCNTs up to 3wt%.

Poly (L-lactide-co-e-caprolactone)/Functionalized CNTs Nanocomposite,Thermal and Mechanical Properties

EFFICIENT LOAD TRANSFER TO FUNCTIONALIZED CARBON NANOTUBES AS REINFORCEMENT IN POLYMER NANOCOMPOSITES

Functionalization of multiwalled carbon nanotubes for reinforcing of poly(l-lactide-co-ε-caprolactone) biodegradable copolymers

Synthesis, Stereocomplex Crystallization and Properties of Poly(l‐lactide)/four‐armed Star Poly(d‐lactide) Functionalized Carbon Nanotubes Nanocomposites

Poly(l-lactide)/four-armed Star Poly(l-Lactide) Grafted Multiwalled Carbon Nanotubes Nanocomposites: Preparation, Rheology, Crystallization, and Mechanical Properties

Preparation and characterization of biodegradable polycaprolactone/multiwalled carbon nanotubes nanocomposites

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

Thermo-mechanical Properties of MWCNT-g-poly (L-Lactide)/poly (L-Lactide) Nanocomposites

Selective Localization Of Multiwalled Carbon Nanotubes In Poly(Epsilon-Caprolactone)/Polylactide Blend

Synergistic Effects of Multi-Wall Carbon Nanotubes and Polycaprolactone on the Thermal and Mechanical Properties of Polylactic Acid

Shape Memory Properties of Poly(L-Lactide) / Poly(ε-Caprolactone) Blends and Their Composites with Carbon Nanotubes

Enhanced Mechanical and Photoluminescence Effect of Poly( L -Lactide) Reinforced with Functionalized Multiwalled Carbon Nanotubes

Crystallinity of Biodegradable Polymers Reinforced with Functionalized Carbon Nanotubes

Thermo-mechanical properties of MWCNT- g -poly ( l -lactide)/poly ( l -lactide) nanocomposites

Effect of Carbon Nanotubes on Shape memory properties of poly (L-lactide)/poly (- caprolactone) blends

Properties and Degradation Behavior of Surface Functionalized MWCNT/poly(L‐lactide‐co‐ε‐caprolactone) Biodegradable Nanocomposites

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Preparation of electrospun nanofibers of carbon nanotube/polycaprolactone nanocomposite

Synthesis and thermal behavior of poly(ε-caprolactone) grafted on multiwalled carbon nanotubes with high grafting degrees

Poly(ε-caprolactone)-Functionalized Carbon Nanotubes and Their Biodegradation Properties

Straight and Rod-like Core–Sheath Crystals of Solution-Crystallized Poly(ε-caprolactone)/Multiwalled Carbon Nanotube Nanocomposites