The State Art and Research Progresses of High Power Klystron

DING Yao-gen,LIU Pu-kun,ZHANG Zhao-chuan,WANG Yong

DOI: https://doi.org/10.3969/j.issn.1002-8935.2010.06.001

2010-01-01

Abstract:The state art,research progresses and application of high power klystron are presented in this paper.The main research work and achievements on high power klystron in China are also introduced,and the development of klystron technology for future is discussed.

What problem does this paper attempt to address?

Research progress of high peak power klystron in China

Rui Zhang,Pukun Liu,Wenxin Liu,Yong Wang

DOI: https://doi.org/10.1109/IVEC.2012.6262073

2012-04-24

Abstract:In China, the R&D of high peak power klystron has been made much progress in recent years. In 2010, the Institute of Electronics, Chinese Academy of Sciences (IECAS) has successfully developed S-band 100MW klystron, and, currently, are developing an S-band 150MW klystron. The Institute of High Energy Physics, Chinese Academy of Sciences (IHEP) cooperated with the Hang Guang Electrical Factory has developed S-band 65MW klystron. In this paper, the specifications of our typical high peak power klystrons are presented and the key technical problems for developing this kind of klystron will be discussed in this conference.

Physics,Engineering
The Status of Power Electronics Research and Application in China

Dehong Xu,Ke Ma,Min Chen

DOI: https://doi.org/10.1109/icit.2010.5472646

2010-01-01

Abstract:Technologies and markets of power electronics in China have significantly changed and developed last decades. This paper firstly reviewed progresses of power electronics technology in China. Then China's power electronics markets are investigated. Finally, China's future promising fields related to power electronics are presented.
Research and development of Multi-Beam Klystrons in China

Yaogen Ding,Pukun Liu,Zhaozhuan Zhan,Yong Wang

DOI: https://doi.org/10.1109/IVELEC.2009.5193354

2009-01-01

Abstract:Many types of Multi-Beam Klystrons (MBKs) with frequency range from L to Ku band, power level of several hundred watts to several hundred kilo-watts, have been developed in China during last 17 years. The research work on both special technology and tubes will be described in this paper. The technical problems of the MBKs are also discussed.
A New Method to Improve the Efficiency of High Peak Power Klystron

Yong Zhong,Yan Shu

DOI: https://doi.org/10.1109/IVEC53421.2022.10292363

2022-04-25

Abstract:High peak power klystron has broad application prospects in large scientific and engineering fields such as microwave weapon system and high-energy electron positron collider. The conventional methods to improve the efficiency of high peak power klystron mainly include second harmonic cavities, long drift tube technology and extended interaction circuits. In this paper, the design method of reducing microwave leakage is adopted to improve the efficiency of 100MW klystron working in S-band instantaneous power by more than 5%.

Physics,Engineering
Preliminary Research of High Peak Power Multi-Beam Klystron

WANG Yong,DING Yao-gen,LIU Pu-kun,XIE Jing-xin,ZHANG Rui

2005-01-01

High Power Laser and Particle Beams

Abstract:The ghigh peak power klystron works as a high power microwave source and is receiving much recognition. The single beam high power klystron has experienced many drawbacks that are unable to overcome, such as the high operating voltage, the low output efficiency, and the bulky system volume etc. In this paper, the high peak power Multi-Beam Klystron(MBK) was preliminarily researched and the electron optics system and RF interaction system of an S-band 50 MW MBK were studied. The results show that the MBK has many advantages compared with the single beam klystron. Under the same power level, the MBK reduces the operating voltage and improves the efficiency greatly.
Development Of High Peak Power Klystron In Iecas

Yong Wang,Yaogen Ding,Pukun Liu,Jingxin Xie

DOI: https://doi.org/10.1109/IVELEC.2008.4556358

2008-01-01

Abstract:Since 1970s the Institute of Electronics, Chinese Academy of Sciences (IECAS) has successively developed S-band 5MW,20MW and 50MW klystrons for accelerators. Currently, we are developing the S-band 100MW klystron. In this paper, the specifications of our typical high peak klystrons are presented and the key technical problems for developing this kind of klystron are discussed.
Design and simulation of high power L-band multi-beam klystron

Yong Wang,Wang Ruan,Rui Zhang,Jingxin Xie,Yaogen Ding,Pukun Liu

2009-01-01

Abstract:An L-band 10 MW peak power, 150 kW average power multi-beam klystron (MBK) is studied. High quality multiple paracial electron optics system axis are achieved in a uniform, multi-lens magnetic field focusing system. The non-linear calculation of beam-wave interaction is carried for the L-band MBK with six electron beams and six coaxial cavities including a second harmonic cavity. The results show that the multi-beam klystron can produce an output peak power of more than 10 MW, an efficiency of more than 65% and a gain of more than 45 dB with a beam voltage of 115 kV and a beam current of 132 A.
12.4: Research Progress of S-band Broadband Klystron in IECAS

Yong Wang,Yaogen Ding,Pukun Liu,Zhiqiang Zhang

DOI: https://doi.org/10.1109/ivelec.2010.5503523

2010-01-01

Abstract:From 1960s the Institute of Electronics, Chinese Academy of Sciences (IECAS) began to study the broadband klystron. Many methods to extend bandwidth of klystron have been adopted and more than ten types of broadband klystron have been developed. Recently we have successfully broken through the bandwidth of 12% in S-band on the peak power level of 800 kW. This paper introduces the state-of-art of our S-band broadband klystron.
The Design and Performance of an X-band Broadband Klystron With Peak Power of 1MW

Yuan Liang,Honghong Gu,Xin Guo,Bin Shen,Caiying Wang,Yao-gen Ding

DOI: https://doi.org/10.1109/IVEC56627.2023.10157415

2023-04-25

Abstract:This paper presents the design and measurement results of an X-band broadband klystron with a peak power of 1MW developed at Aerospace Information Research Institute, Chinese Academy of Science (AIRCAS). In the development of this klystron, the single electron beam with an electromagnetic focusing system was adopted to achieve a high beam transmission rate. Meanwhile, a filter-loaded over-lapping mode double gap coupling cavities output circuit (OMDGOC) and a pill-box output window were used to ensure the klystron has an operating bandwidth of 650MHz. The 1# klystron was tested under a 1 % duty ratio at 27 operating frequency points. The technical specifications of this klystron are as follows: peak power: over 1MW, efficiency: over 24.3 %, gain: over 37.1dB, beam transmission rate: over 96%, which meet the design requirements.

Physics,Engineering
Research on a broad-band X-band high power relativistic klystron amplifier

Hongtao Yao,Jinchuan Ju,Wei Zhang,Tengfang Wang,Yunxiao Zhou,Ying Li

DOI: https://doi.org/10.1063/5.0219782

IF: 2.2

2024-10-01

Physics of Plasmas

Abstract:This paper introduces a high-power broadband X-band klystron amplifier that achieves an output power of 157 MW and a 3 dB operating bandwidth of 6.7%. The amplifier employs an explosive emission diode with high impedance, which balances the requirements of high power and broadband. The multi-gap input and output cavities are designed to operate at two different longitudinal modes within the operating frequency band, resulting in a flat absorption rate and output efficiency. Moreover, an eight-stage stagger-tuned bunching section is implemented to achieve a uniform fundamental harmonic current modulation depth across the frequency band. Simulation results indicate that when the diode voltage is 550 kV and the beam current is 550 A, the amplifier can achieve a maximum power of 157 MW with an efficiency of 51.9% at the central frequency of 9.8 GHz. Furthermore, within the 3 dB operating bandwidth of 6.7% (670 MHz), the power output remains higher than 80 MW. This novel klystron amplifier structure exhibits exceptional performance in terms of bandwidth, power, and efficiency, thus validating the effectiveness of the design in enhancing bandwidth and providing a solid foundation for the broadband design of high-power microwave sources.

physics, fluids & plasmas
Progress of developing the 10MW L-band multi-beam klystron

Junjie Fan,Wenxin Liu,Yong Wang,Rui Zhang,Yong Zhong

DOI: https://doi.org/10.1109/IVEC.2013.6570926

2013-05-21

Abstract:The Development of the 10MW L-band multibeam klystron was started in the Institute of Electronics, Chinese Academy of Sciences (IECAS) three years ago. The electrical and structural designs for this klystron have been accomplished , in which many technical problems have been resolved. In the design of electron optical system, the uniform field multiple-lens focusing scheme was adopted, by which the paraxial multi-beams with good laminarity and fluctuation were obtained. In the design of beam-wave interaction system, the second harmonic cavity was used to enhance the beam-wave interaction efficiency and reduce the volume and weight of the klystron. Nowadays, the prototype is being fabricated and will be finished in one or two months. This paper presents the research progress on the 10MW L-band multi-beam klystron and the key technical issues resolved in detail.

Physics,Engineering
Recent Progress of Pulsed-Power-Driven High Energy Density Physics in China

Jianjun Deng,Weiping Xie,Meng Wang,Suping Feng,Hongtao Li,Wenkang Zou,Lin Chen,Xianbin Huang,Zhaohui Zhang,Kunlun Wang,Shaotong Zhou,Qiang Xu,Le Xu,Ning Ding,Delong Xiao,Cheng Ning,Yang Zhang

DOI: https://doi.org/10.1109/icops37625.2020.9717447

2020-01-01

Abstract:Pulsed power driven high energy density physics is of very importance for inertial confinement fusion, dynamic characteristics studies of material, fusion energy and so on. Researches on pulsed-power-driven high energy density physics have been conducted more the three decades in China. In the paper a brief review of these researches will be presented. Main content will be emphasized on recent progress conducted on PTS. Future plan on new pulsed power driver for higher energy density physics will be also proposed.
Development of High-Power Low-Voltage C-Band Klystron for Economic Application

D. A. Komarov,E. P. Yakushkin,S. P. Maslennikov,Y. N. Paramonov

DOI: https://doi.org/10.1134/S1063778818110091

2019-10-07

Physics of Atomic Nuclei

Abstract:In the paper, we present the development of the powerful multiple-beam klystron amplifier with the peak output power of 3.2 MW and operating frequency of 5712 MHz. We show the capability of suppressing the high-voltage breakdowns in the collector area and increasing the efficiency of the multiple-beam klystron owing to alignment of the electric fields in the output cascade.

physics, particles & fields, nuclear
Design and high-power test of 800-kW UHF klystron for CEPC

Ou-Zheng Xiao,Shigeki Fukuda,Zu-Sheng Zhou,Un-Nisa Zaib,Sheng-Chang Wang,Zhi-Jun Lu,Guo-Xi Pei,Munawar Iqbal,Dong Dong

DOI: https://doi.org/10.1088/1674-1056/ac6b26

2022-08-01

Chinese Physics B

Abstract:To reduce the energy demand and operation cost for circular electron positron collider (CEPC), the high efficiency klystrons are being developed at Institute of High Energy Physics, Chinese Academy of Sciences. A 800-kW continuous wave (CW) klystron operating at frequency of 650-MHz has been designed. The results of beam–wave interaction simulation with several different codes are presented. The efficiency is optimized to be 65% with a second harmonic cavity in three-dimensional (3D) particle-in-cell code CST. The effect of cavity frequency error and mismatch load on efficiency of klystron have been investigated. The design and cold test of reentrant cavities are described, which meet the requirements of RF section design. So far, the manufacturing and high-power test of the first klystron prototype have been completed. When the gun operated at DC voltage of 80 kV and current of 15.4 A, the klystron peak power reached 804 kW with output efficiency of about 65.3% at 40% duty cycle. The 1-dB bandwidth is ±0.8 MHZ. Due to the crack of ceramic window, the CW power achieved about 700 kW. The high-power test results are in good agreement with 3D simulation.

physics, multidisciplinary
Pulse High-Power Multi-Beam Klystron

FU Chun-hua,ZHOU Sui-ming,ZUO Hai-bo,MIN Li-tao,LI Ye,ZHANG Jun-hong,ZHANG Chang-song,LI Hong-tao

DOI: https://doi.org/10.16540/j.cnki.cn11-2485/tn.2012.03.015

2012-01-01

Abstract:A Broad-pulsewidth and high-power multi-beam klystron(MBK) is introduced in this article.The average power of the MBK is above 6 kW.And the pulse width is 1.1 ms.Some structure characteristics are also introduced.
Development of a CW S-Band Broadband Klystron

DING Hai-bing,DING Yao-gen,YU Bo,TANG Ke,WANG Chun-yu

DOI: https://doi.org/10.3969/j.issn.1002-8935.2010.06.006

2010-01-01

Abstract:A CW S-band broadband klystron for communication system has been developed at Institute of Electronics,Academy of Sciences.The design and calculation of the klystron are presented in this paper.Two types of broadband output circuits,filter loaded double-gap coupling cavity output circuit with mode coalescence and three-pole filter-loaded single cavity output circuit,are used in the klystron.The design,calculation and test results for these two types of output circuits are given in this paper.The klystron with three-pole filter loaded single cavity output circuit has CW output power of 17 kW and instantaneous bandwidth of 4.6%.
Development of an S-band 100MW Klystron in IECAS

Yong Wang,Jingxin Xie,Rui Zhang,Yaogen Ding,Pukun Liu

DOI: https://doi.org/10.1109/ivelec.2009.5193429

2009-01-01

Abstract:The Institute of Electronics, Chinese Academy of Sciences (IECAS) is developing an S-band 100 MW klystron for linear accelerators. The klystron has five-cavities, including a double-gap 2pi-mode output cavity. The output section consists of a cavity with double gaps and one output waveguide. To date two prototypes were fabricated. Unfortunately, the first one was suffered from leaking on the edge of the high-voltage ceramic as its operating voltage reached 220 kV. Nowadays the conditioning of the second one is underway which has reached a voltage of 350kV. In this paper the design considerations and the key technical issues are described and the preliminary test results of the klystron are given.
Development of 50MW S-band Klystron

Wang Yong,Xie Jingxin,Ding Yaogen,Liu Pukun

DOI: https://doi.org/10.1007/s11767-005-0204-9

2006-01-01

Abstract:This letter reports the development of a 50MW S-band klystron in the Institute of Electronics, Chinese Academy of Sciences (IECAS). It adopted a structure of six-cavity and single output window. Under conditions of an RF (Radio Frequency) pulse width of 4μs, a beam voltage of 305.9kV and a beam current of 368A, the peak output power has achieved 51.4MW with an efficiency of 45.6% and a gain of 54dB.
Review of the Research Progress of Laser Accelerator CLAPA-II

Wang KeDong,Zhao YanYing,Zhu Kun,Ma WenJun,Lin Chen,Wu Hao,Wu XueZhi,Geng YiXing,Zhao JiaRui,Wang Kai,Wang Qiang,Xiang HaiYan,Yan XueQing

DOI: https://doi.org/10.1360/sspma-2022-0433

2023-01-01

Abstract:As the core instrument in nuclear physics, particle accelerators are an important symbol of comprehensive national strength. After years of development, the related technology of particle accelerators has essentially been completed. The research on new acceleration mechanisms has become a rapidly growing field of particle accelerator technology. Because no breakdown problem is produced by the electric field in the interaction between a laser beam and plasma, the accelerated field gradient generated is much higher than that of conventional accelerators. This new acceleration technology could potentially realize high-energy beam acceleration more economically. Once this technology reaches the engineering application standard, accelerator construction will be highly facilitated. However, because of its short development time, laser acceleration technology still faces many challenges in engineering applications. To transform laser acceleration technology from experiment to practical applications, laser accelerator CLAPA-II was developed and constructed at Peking University under the support of the Ministry of Science and Technology of China. This paper mainly introduces the main components of the CLAPA-II device and the research progress of key core technologies.
Improvement for an S-Band Broadband Klystron

Shouxi Xu,Jian Zhang,Yaogen Ding,Yong Wang,Rui Zhang

DOI: https://doi.org/10.1109/ted.2024.3354871

IF: 3.1

2024-03-06

IEEE Transactions on Electron Devices

Abstract:This article presents some important improvements of the -band broadband klystron development. In the course of hot test of an -band 800-kW peak power klystron with 250-MHz instantaneous bandwidth (the equal-driving input power), the power dip and RF breakdown phenomenon has described. Through simulation analysis and experimental investigation, the technological problems have been solved. The retrofitted klystron has been conducted and tested, the fluctuation of output power is less than 0.5 dB within 250-MHz bandwidth at constant drive power, and the RF breakdown problem of the output system is overcome. The improvement of the waveform of the klystron has also been made.

engineering, electrical & electronic,physics, applied

The State Art and Research Progresses of High Power Klystron

Research progress of high peak power klystron in China

The Status of Power Electronics Research and Application in China

Research and development of Multi-Beam Klystrons in China

A New Method to Improve the Efficiency of High Peak Power Klystron

Preliminary Research of High Peak Power Multi-Beam Klystron

Development Of High Peak Power Klystron In Iecas

Design and simulation of high power L-band multi-beam klystron

12.4: Research Progress of S-band Broadband Klystron in IECAS

The Design and Performance of an X-band Broadband Klystron With Peak Power of 1MW

Research on a broad-band X-band high power relativistic klystron amplifier

Progress of developing the 10MW L-band multi-beam klystron

Recent Progress of Pulsed-Power-Driven High Energy Density Physics in China

Development of High-Power Low-Voltage C-Band Klystron for Economic Application

Design and high-power test of 800-kW UHF klystron for CEPC

Pulse High-Power Multi-Beam Klystron

Development of a CW S-Band Broadband Klystron

Development of an S-band 100MW Klystron in IECAS

Development of 50MW S-band Klystron

Review of the Research Progress of Laser Accelerator CLAPA-II

Improvement for an S-Band Broadband Klystron