Pulse High-Power Multi-Beam Klystron

FU Chun-hua,ZHOU Sui-ming,ZUO Hai-bo,MIN Li-tao,LI Ye,ZHANG Jun-hong,ZHANG Chang-song,LI Hong-tao

DOI: https://doi.org/10.16540/j.cnki.cn11-2485/tn.2012.03.015

2012-01-01

Abstract:A Broad-pulsewidth and high-power multi-beam klystron(MBK) is introduced in this article.The average power of the MBK is above 6 kW.And the pulse width is 1.1 ms.Some structure characteristics are also introduced.

What problem does this paper attempt to address?

Preliminary Research of High Peak Power Multi-Beam Klystron

WANG Yong,DING Yao-gen,LIU Pu-kun,XIE Jing-xin,ZHANG Rui

2005-01-01

High Power Laser and Particle Beams

Abstract:The ghigh peak power klystron works as a high power microwave source and is receiving much recognition. The single beam high power klystron has experienced many drawbacks that are unable to overcome, such as the high operating voltage, the low output efficiency, and the bulky system volume etc. In this paper, the high peak power Multi-Beam Klystron(MBK) was preliminarily researched and the electron optics system and RF interaction system of an S-band 50 MW MBK were studied. The results show that the MBK has many advantages compared with the single beam klystron. Under the same power level, the MBK reduces the operating voltage and improves the efficiency greatly.
Design and simulation of high power L-band multi-beam klystron

Yong Wang,Wang Ruan,Rui Zhang,Jingxin Xie,Yaogen Ding,Pukun Liu

2009-01-01

Abstract:An L-band 10 MW peak power, 150 kW average power multi-beam klystron (MBK) is studied. High quality multiple paracial electron optics system axis are achieved in a uniform, multi-lens magnetic field focusing system. The non-linear calculation of beam-wave interaction is carried for the L-band MBK with six electron beams and six coaxial cavities including a second harmonic cavity. The results show that the multi-beam klystron can produce an output peak power of more than 10 MW, an efficiency of more than 65% and a gain of more than 45 dB with a beam voltage of 115 kV and a beam current of 132 A.
Research Progress on Multi-Beam Klystron

YG Ding,J Peng,YS Zhu,SM Shi,JJ Zhao,ZB Jiang,XL Ying,ML Bao

DOI: https://doi.org/10.1109/icmwft.1996.574826

1996-01-01

Abstract:Multi-beam klystron(MBK) is a new type of high power microwave amplifier. IEAS began the research work on MBK in 1992. Some research progress on the S-band 200kW MBK will be described in this paper. It includes the design and calculation of the MBK, the design and manufacture of multi-beam electron gun and its focusing system, the design and cold measurement of the filter-load it-mode double gap coupling cavity. The hot test results of S-band 200kW MBK are also given in this paper.
An Overview of Multibeam Klystron Technology

D. Abe,Haibing Ding,Dongping Gao,Bin Shen,Yao-gen Ding

DOI: https://doi.org/10.1109/TED.2023.3244906

IF: 3.1

2023-06-01

IEEE Transactions on Electron Devices

Abstract:The multibeam klystron (MBK) is a compact high-power microwave vacuum electronic device that features low beam voltage, high efficiency, wide bandwidth, and low volume and weight. Since the 1960s, high-performance broadband MBKs have been developed that cover the entire microwave frequency band with relative instantaneous bandwidths <inline-formula> <tex-math notation="LaTeX">$>$ </tex-math></inline-formula>15%, peak power <inline-formula> <tex-math notation="LaTeX">$>$ </tex-math></inline-formula>1 MW, average power up to 40 kW, and efficiencies <inline-formula> <tex-math notation="LaTeX">$>$ </tex-math></inline-formula>40%. In recent years, driven by the needs of high-energy particle accelerators, ultra high frequency (UHF) and <inline-formula> <tex-math notation="LaTeX">${L}$ </tex-math></inline-formula>-band MBKs with peak powers of more than 20 MW and efficiencies of nearly 80% are being developed. This article presents an overview of the development of broadband MBKs used in microwave electronic systems, such as radar and communication, and high-power MBKs used in the RF systems of particle accelerators. It also introduces the latest progress and development trends in MBKs leading to higher frequency, output power, bandwidth, efficiency, and lifetime.

Physics,Engineering
Design and simulation of an S-band compact multi-beam klystron

Xiaobo Lin,Rui Zhang,Li Zuo,Quangui Chao,Bingchuan Xie,Zhicheng Wang,Zhihui Geng,Yunfeng Liao,Xiudong Yang

DOI: https://doi.org/10.1063/5.0157492

IF: 1.697

2023-11-01

AIP Advances

Abstract:The miniaturization and high power of klystron are the main concerns of accelerators. Multi-beam klystron (MBK) can accommodate higher power and a lower operating voltage than single-beam klystrons, significantly reducing volume and weight. This paper introduces the design and simulation of the beam-wave interaction system and multi-beam electron gun for S-band compact MBK. The 3-D particle simulation results show that the output power of the MBK is 12.6 MW, driven by an input signal with a frequency of 2856 MHz and a power of 13 W. The corresponding efficiency is 70%. In addition, the gain of the MBK is 59.9 dB. The design goal of S-band miniaturized high-power MBK is realized.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Research and development of Multi-Beam Klystrons in China

Yaogen Ding,Pukun Liu,Zhaozhuan Zhan,Yong Wang

DOI: https://doi.org/10.1109/IVELEC.2009.5193354

2009-01-01

Abstract:Many types of Multi-Beam Klystrons (MBKs) with frequency range from L to Ku band, power level of several hundred watts to several hundred kilo-watts, have been developed in China during last 17 years. The research work on both special technology and tubes will be described in this paper. The technical problems of the MBKs are also discussed.
Study of a C-band Broadband Klystron Based on Hollow Beam

Zhaowei Qu,Zhaochuan Zhang,Pukun Liu

DOI: https://doi.org/10.1109/ivec.2015.7223911

2015-01-01

Abstract:For the development of a long-lived high-stability high-efficiency broadband klystron, a high-perveance hollow electron beam [1] is considered instead of a pencil beam. The simulation results of electron optics system and beam-wave interaction are given using Arsenal-MSU code [2]. The results indicate that in the case of saturated drive and 5.1% relative bandwidth, the klystron can get a peak power of more than 2.5 MW, an efficiency of more than 40%.
Design of a C-Band Klystron with High Power and High Efficiency

Zixuan Su,Jinchi Cai,Shan Chen,Rui Guo,Jin Xu,Hairong Yin,Lingna Yue,Pengcheng Yin,Guoqing Zhao,Dagui Shen,Wenxiang Wang,Yanyu Wei

DOI: https://doi.org/10.1109/ivec56627.2023.10157640

2023-01-01

Abstract:The design of a C-band klystron with high power and high efficiency (HE) is reported in this paper, involving beam-wave interaction, electron optics system (EOS) and RF window. The simulation result of the beam-wave interaction is presented, in which the klystron could deliver up to 48% electronic efficiency and 47% RF efficiency. The pulsed output power is 5.29 MW at the bandwidth of 16 MHz with the gain over 46 dB. The simulation results show that the gun of electron optics system can generate a pencil beam with radius of 4.5 mm, voltage of 130 kV, current of 85 A. Permanent magnet (PM) focusing is adopted in this Klystron, providing a peak magnetic field of 0.26 T in the interaction region. A compact two-stage depressed collector was designed for collecting particles at the end of interaction with thermal dissipation density less than 0.01 kw/cm2. RF window design is also conducted to compete the physical design study of this C-band HE Klystron.
Research on a broad-band X-band high power relativistic klystron amplifier

Hongtao Yao,Jinchuan Ju,Wei Zhang,Tengfang Wang,Yunxiao Zhou,Ying Li

DOI: https://doi.org/10.1063/5.0219782

IF: 2.2

2024-10-01

Physics of Plasmas

Abstract:This paper introduces a high-power broadband X-band klystron amplifier that achieves an output power of 157 MW and a 3 dB operating bandwidth of 6.7%. The amplifier employs an explosive emission diode with high impedance, which balances the requirements of high power and broadband. The multi-gap input and output cavities are designed to operate at two different longitudinal modes within the operating frequency band, resulting in a flat absorption rate and output efficiency. Moreover, an eight-stage stagger-tuned bunching section is implemented to achieve a uniform fundamental harmonic current modulation depth across the frequency band. Simulation results indicate that when the diode voltage is 550 kV and the beam current is 550 A, the amplifier can achieve a maximum power of 157 MW with an efficiency of 51.9% at the central frequency of 9.8 GHz. Furthermore, within the 3 dB operating bandwidth of 6.7% (670 MHz), the power output remains higher than 80 MW. This novel klystron amplifier structure exhibits exceptional performance in terms of bandwidth, power, and efficiency, thus validating the effectiveness of the design in enhancing bandwidth and providing a solid foundation for the broadband design of high-power microwave sources.

physics, fluids & plasmas
Modeling and Design of a High-Efficiency Multibeam Klystron

Quangui Chao,Rui Zhang,Yong Wang,Xu Zhang

DOI: https://doi.org/10.1109/ted.2022.3157804

IF: 3.1

2022-05-01

IEEE Transactions on Electron Devices

Abstract:The efficiency of the RF power sources is one of the major concerns in the large-scale high-energy accelerator projects such as the future circular collider (FCC) and the compact linear collider (CLIC). The new bunching method, the core stabilization method (CSM), can achieve high efficiency in the case of shorter interactive length. The multibeam klystron (MBK) could accommodate high RF power with a low operating voltage, compared with a single-beam klystron. This article presents the design and simulation of a 650-MHz, 0.9-MW continuous wave (CW) CSM MBK. The detailed design of a six-beam optics system is also elaborated in this article. The performance of such a device was validated by the 3-D particle-in-cell (PIC)-code computer simulation. With an operating voltage of 50 kV, PIC simulation predicts an efficiency of 81.8%.

engineering, electrical & electronic,physics, applied
Design of the HOM MBK with Multiple-Gap Output Cavity

Zening Liu,Hao Zha,Jiaru Shi,Huaibi Chen

DOI: https://doi.org/10.1109/ted.2021.3134595

2022-01-01

Abstract:This article presents a higher-order mode (HOM) multiple-beam klystron (MBK) with a multiple-gap output cavity that operates at 9.3 GHz. There are a total of 12 beams in the klystron, and each beamlet has a current of 12 A. The klystron has a beam voltage lower than 60 kV. The disadvantage of the low beam voltage on efficiency is analyzed, and the efficiency of 40% only can be obtained by using a single-gap output cavity. The relationships between the optimal efficiency and the electron transit angle of $\pi $ -mode double-gap and triple-gap output cavities are studied in this article. Based on these relationships, a single-beam klystron with a triple-gap output cavity is designed to reach an efficiency of 60%. The radio frequency (RF) circuit for an MBK with a triple-gap is designed to obtain an efficiency higher than 55% and an output power of 4.5 MW. Specific 3-D effects with asymmetric input power and phase and one absent beam are studied in this article. KlyC is used for 1-D and 1.5-D calculations, and CST is used for 3-D calculations.
90% Efficient Two-Stage Multibeam Klystron: Modeling and Design Study

S. Shchelkunov,J. Hirshfield,V. Teryaev

DOI: https://doi.org/10.1109/TED.2020.3033267

IF: 3.1

2020-12-01

IEEE Transactions on Electron Devices

Abstract:The efficient generation of microwave power has recently gained broad attention in the accelerator community because energy consumption is one of the major concerns for future large-scale high-energy accelerator projects. For the first time, we present a concept of the two-stage multibeam klystron with annular beams (TS MABK). It allows for a remarkably high RF power production efficiency (90%), using a compact design and delivering a cost-effective electro-mechanical solution. The design is for a 1-GHz, 20-MW klystron. The performance of the tube is validated using particle-in-cell computer simulations. In this article, we focus on technological novelties and on mitigation of specific issues.

Computer Science,Physics,Engineering
Design of Beam-Wave Interaction Based on High Efficiency of a High-Power Broadband Klystron

Zhaowei Qu,Zhaochuan Zhang,Pukun Liu,Rui Zhang,Junjie Fan

DOI: https://doi.org/10.1007/s11767-014-3176-9

2014-01-01

Journal of Electronics (China)

Abstract:The paper mainly presents the design of beam-wave interaction of a C-band high-peak-power high-efficiency broadband klystron. The beam-wave interaction section is designed based on considerations of efficiency and bandwidth synthetically. As a part of beam-wave interaction section, buncher section is simulated by Particle-In-Cell (PIC) code to observe the bunching process of electron beam to achieve high conversion efficiency of electron beam and RF field. When it comes to the other part, output circuit is designed as a three-section filter by an output cavity loaded with Chebyshev filter, and the cold test results are given. The beam-wave interaction is simulated by EGUN code and Arsenal-MSU code respectively. The simulated results indicated that, the existence of power dips in the operating bandwidth is verified by Arsenal-MSU code, comparing proper results by EGUN code. Then, the method that design parameters are not adjusted except parameters of buncher cavities to remove potential power dips is described. What is more, the simulated results of electron optics system are given by EGUN code and Arsenal-MSU code respectively. The further hot test results of klystron prove that the whole design of beam-wave interaction is effective.
Superpower X-Band Klystron with an Output Pulse Power of at Least 3 MW: Design and Experiment

D. A. Komarov,E. P. Yakushkin,Yu. N. Paramonov,S. V. Surkov,D. A. Kalashnikov

DOI: https://doi.org/10.1134/s1064226923080065

2024-01-02

Journal of Communications Technology and Electronics

Abstract:The results of numerical simulation of a multiple-beam X-band klystron have been presented. The analysis of a new principle of constructing the interaction space that allows us to provide a high efficiency value without using second harmonic resonators has been given. The results of an experimental study of the developed 25-beam KIU-283 klystron with a peak power of 3.0 MW at a frequency of 9300 MHz with an electronic efficiency of 58% have been presented.

telecommunications,engineering, electrical & electronic
High power microwave system based on power combining and pulse compression of conventional klystrons

Zheng-Feng Xiong,Huai-Bi Chen,Cheng Cheng,Hui Ning,Chuan-Xiang Tang

DOI: https://doi.org/10.48550/arXiv.1512.03536

2015-12-11

Abstract:A high power microwave system based on power combining and pulse compression of conventional klystrons is introduced in this paper. This system mainly consists of pulse modulator, power combiner, driving source of klystrons and pulse compressor. A solid state induction modulator and pulse transformer were used to drive two 50 MW S-band klystrons with pulse widths 4 {\mu}s in parallel, after power combining and pulse compression, the tested peak power had reached about 210 MW with pulse widths nearly 400 ns at 25 Hz, while the experimental maximum output power was just limited by the power capacity of loads. This type of high power microwave system has widely application prospect in RF system of large scale particle accelerators, high power radar transmitters and high level electromagnetic environment generators.

Accelerator Physics
Development of High-Power Low-Voltage C-Band Klystron for Economic Application

D. A. Komarov,E. P. Yakushkin,S. P. Maslennikov,Y. N. Paramonov

DOI: https://doi.org/10.1134/S1063778818110091

2019-10-07

Physics of Atomic Nuclei

Abstract:In the paper, we present the development of the powerful multiple-beam klystron amplifier with the peak output power of 3.2 MW and operating frequency of 5712 MHz. We show the capability of suppressing the high-voltage breakdowns in the collector area and increasing the efficiency of the multiple-beam klystron owing to alignment of the electric fields in the output cascade.

physics, particles & fields, nuclear
The Design and Performance of an X-band Broadband Klystron With Peak Power of 1MW

Yuan Liang,Honghong Gu,Xin Guo,Bin Shen,Caiying Wang,Yao-gen Ding

DOI: https://doi.org/10.1109/IVEC56627.2023.10157415

2023-04-25

Abstract:This paper presents the design and measurement results of an X-band broadband klystron with a peak power of 1MW developed at Aerospace Information Research Institute, Chinese Academy of Science (AIRCAS). In the development of this klystron, the single electron beam with an electromagnetic focusing system was adopted to achieve a high beam transmission rate. Meanwhile, a filter-loaded over-lapping mode double gap coupling cavities output circuit (OMDGOC) and a pill-box output window were used to ensure the klystron has an operating bandwidth of 650MHz. The 1# klystron was tested under a 1 % duty ratio at 27 operating frequency points. The technical specifications of this klystron are as follows: peak power: over 1MW, efficiency: over 24.3 %, gain: over 37.1dB, beam transmission rate: over 96%, which meet the design requirements.

Physics,Engineering
Preliminary Study of the Characteristic of Multi-Beam in Intense Multi-Beam Relativistic Klystron

Liu Zhen-Bang,Jin Xiao,Huang Hua,Chen Huai-Bi,Wang Gan-Ping

DOI: https://doi.org/10.7498/aps.61.248401

IF: 0.906

2012-01-01

Acta Physica Sinica

Abstract:Compared with the conventional klystron, high power multi-beam klystron makes use of many low perveance beams, then it has a high output efficiency and low operating voltage, but it brings new problems. There fore, the multi-beam intense relativistic electron beam transmission in the multi-beam klystron is investigated by experiment and simulation. The results show that the multi-beam rotates around the center of the system due to the interaction of the multi-beam, and simultaneously the multi-beam rotates around its own center due to the space charge effect of each beam's own. All the process can result in electron beams loss.
High Power Microwave System Based on Power Combination and Pulse Compression of Conventional Klystrons

Zhengfeng Xiong,Huaibi Chen,Hui Ning,Cheng

DOI: https://doi.org/10.1109/isape.2018.8634066

2015-01-01

Abstract:A high power microwave system based on power combination and pulse compression of conventional klystrons is introduced in this paper. This system mainly consists of pulse modulator, power combiner, driving source of klystrons and pulse compressor. A solid state induction modulator and pulse transformer were used to drive two 50MW S-band klystrons with pulse widths 4μs in parallel, after power combination and pulse compression, the tested peak power had reached about 210MW with pulse widths nearly 400 ns at 25Hz, while the experimental maximum output power was just limited by the power capacity of loads. This type of high power microwave system has widely application prospects in RF system of large scale particle accelerators, high power radar transmitters and high level electromagnetic environment generators.
Multi-beam gun design for an S-band klystron

Xiaobo Lin,Rui Zhang,Quangui Chao,Bingchuan Xie,Zhihui Geng,Yunfeng Liao,Xiudong Yang

DOI: https://doi.org/10.1063/5.0100499

IF: 1.697

2022-08-31

AIP Advances

Abstract:This paper introduces the detailed design scheme of a multi-beam electron gun applied to an S-band high power multi-beam klystron. The multi-beam gun adopts a coaxial cavity arrangement, and the total number of electron beams are 40 (19 in the inner layer and 21 in the outer layer). The working voltage of the electron gun is 60 kV, the total current is 300 A (evenly distributed on 40 electron beams), and the single beam perveance is 0.51 μ P. The total perveance is 20.4 μ P. The cathode loading of the gun is 12 A/cm 2 , which can meet the requirements of cathode operational lifetime. The beam focusing system uses a periodic reversal permanent magnet to realize miniaturization of the klystron.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

Pulse High-Power Multi-Beam Klystron

Preliminary Research of High Peak Power Multi-Beam Klystron

Design and simulation of high power L-band multi-beam klystron

Research Progress on Multi-Beam Klystron

An Overview of Multibeam Klystron Technology

Design and simulation of an S-band compact multi-beam klystron

Research and development of Multi-Beam Klystrons in China

Study of a C-band Broadband Klystron Based on Hollow Beam

Design of a C-Band Klystron with High Power and High Efficiency

Research on a broad-band X-band high power relativistic klystron amplifier

Modeling and Design of a High-Efficiency Multibeam Klystron

Design of the HOM MBK with Multiple-Gap Output Cavity

90% Efficient Two-Stage Multibeam Klystron: Modeling and Design Study

Design of Beam-Wave Interaction Based on High Efficiency of a High-Power Broadband Klystron

Superpower X-Band Klystron with an Output Pulse Power of at Least 3 MW: Design and Experiment

High power microwave system based on power combining and pulse compression of conventional klystrons

Development of High-Power Low-Voltage C-Band Klystron for Economic Application

The Design and Performance of an X-band Broadband Klystron With Peak Power of 1MW

Preliminary Study of the Characteristic of Multi-Beam in Intense Multi-Beam Relativistic Klystron

High Power Microwave System Based on Power Combination and Pulse Compression of Conventional Klystrons

Multi-beam gun design for an S-band klystron