Dissolution-inhibiting Effect of Silicate-based Inhibitors on Precipitated Calcium Carbonate Filler

沈静,宋湛谦,钱学仁,王开旵,张愉
DOI: https://doi.org/10.3969/j.issn.0254-508x.2008.10.004
2008-01-01
Abstract:Calcium carbonate filler is widely used in alkaline papermaking to lower the manufacturing cost, and to improve the properties of the papers, however, the use of calcium carbonate in wood-containing or rosin-sized papers is usually not industrially feasible because of pulp darkening at alkaline pH or dissolution of calcium carbonate below pH 7. For the more cost-effective use of calcium carbonate filler in papermaking, its dissolution-inhibiting is of great significance. In order to inhibit the dissolution of papermaking grade precipitated calcium carbonate (PCC) filler, silicate-based inhibitors were used in the preparations of modified filler suspensions, and the dissolution-inhibiting effects of the relevant inhibitors were compared and analyzed. Under the controlled experimental conditions, sodium silicate/aluminum sulfate, sodium silicate/aluminum chloride, sodium silicate/phosphoric acid, sodium silicate/phosphoric acid/sodium hexametaphosphate and sodium silicate/ phosphoric acid/sodium polyacrylate were all proved to be effective in dissolution-inhibiting of PCC, and the pH values of filler suspensions consistently decreased to a certain degree after the filler modifications. When diluted, the pH of modified PCC suspensions increased with the decreasing filler concentration. After modification, the filler dissolution in distilled water with pH 5.85, diluted hydrochloric chloride solutions with pH 4.50 and pH 5.00, diluted alum solutions with pH 4.50 and pH 5.00, and tap water with pH 7.26, all decreased to a certain degree. Also, sodium silicate/aluminum sulfate and sodium silicate/aluminum chloride were proved to be less effective as compared with other inhibitors, and sodium silicate/phosphoric acid/sodium hexametaphosphate was highly effective in inhibiting PCC dissolution in different solutions used in this work.
What problem does this paper attempt to address?