Abstract:A decentralized variable electric motor and fixed pump (VMFP) system with a four-chamber cylinder is proposed for mobile machinery, such that the energy efficiency can be improved by hydro-pneumatic energy storage, and problems of closed-circuit pump-controlled systems including asymmetrical flow and speed limitation are addressed. One of the chambers is arranged to the energy storage accumulator to increase energy efficiency, while the other chambers are flexibly connected to the pump ports to achieve variable transmission ratios. The piston areas of the multiple chambers are designed at first to permit a symmetric single-rod cylinder, and secondly a switching system with three operating modes is presented to expand force-velocity capabilities. Then, the four-chamber cylinder system with three solenoid valves is designed to substitute for the traditional two-chamber boom cylinder in a 6-ton excavator. A valve switching logic, as well as a feedforward and feedback compound speed controller, are presented. Simulations conducted in a 6-ton excavator model show that the maximum velocity increases by 66 %, together with asymmetrical flows to diminish the low-pressure charging accumulator. Peak power and energy consumption are both reduced by more than 20 % compared with the VMFP using the two-chamber cylinder. The energy-saving characteristics of the 6-ton excavator are emphatically analyzed considering energy storage and re-utilization. At last, experiment verifications are conducted in a lifting mechanism to verify the proposed energy-storage system.

A New Vertical Direct Driven Volume Control System and Its Characteristic

Direct Drive Volume Control Hydraulic System

Direct Drive Volume Control Electro-hydraulic System

The Modeling and Control of the Hydraulic Servo System by Using On-Off Valve

Research on Direct Drive Volume Control Electro-hydraulic Servo Cylinder of Feed Water Pump Turbine

Theoretical Model and Dynamic Performance of Direct Drive Volume Control Electro-Hydraulic Servo System

The Development of the Static and Dynamic Performance Integrated Test System for Electro-hydraulic Servo Valve

Design and Simulation of Direct Drive Volume Control Actuator

METHOD OF SERIAL CONTROL TO IMPROVE DYNAMIC RESPONSE OF THE ELECTRO-HYDRAULIC POSITION SERVO SYSTEM

The Application of Fuzzy-PID Controller in Direct Driven Volume Control Electro-hydraulic Servo System

Direct Drive Volume Control of Electro-hydraulic Servo System and Its Application to the Steering System of Ship

Development of Parallel-Connected Pump–valve-Coordinated Control Unit with Improved Performance and Efficiency

Direct Drive Volume Control of Electric-Hydraulic Servo System and Its Application in Active Mass Driver (AMD) Systems

Robust controller design of the integrated direct drive volume control architecture for steering systems

Velocity-tracking Control of the Variable-speed Controlled Hydraulic System: Using Compound Algorithm of PD & Feedforward-feedback Control

Study on Control Performance of Digital Piston Pump Based on Virtual Prototype Technology

The Features and Design Elements of Direct Drive Volume Control Hydraulic System

The Design and Analysis of a Hydro-Pneumatic Energy Storage Closed-Circuit Pump Control System with a Four-Chamber Cylinder

Application of the Switched Reluctance Motor Directly-driving Volume Control Technology in Hydraulic Machine

High Precision Energy Saving Motion Control Of Hydraulic Cylinder Based On Integration Of Valves And Pump

Design of a New Energy-saving Hydraulic Pumping Unit with Variable Speed Control and Closed Oil Circuits