Abstract:The effect of cold-drawing on the tensile property and giant magneto-impedance (GMI) effect of melt-extracted Co-based amorphous microwires was evaluated through detailed analyses of the distribution of residual stress and microstructural evolution. The tensile ductility and tensile strength increased gradually with cross-sectional area reduction ratio (R) until 51%, and decreased with further deformation. The microwire with R=51% exhibits the highest tensile ductility of 1.09% and tensile strength of 4320MPa. Structural and thermodynamic analyses reveal that it is the mechanical deformation rather than thermal activation that induces the precipitation of nanocrystals and arrests the quick extension of shear bands leading to the enhanced ductility. Interestingly, the GMI effect also attains the maximum value of 160% at 10MHz when R=51% (30% larger than that of the as-cast wires), before decreasing with further cold-drawing. Such an identical evolution trend of both tensile and GMI properties can be ascribed to two underlying mechanisms: the generation of longitudinal and circumferential residual stresses and the growth of deformation-induced nanocrystals during cold-drawing. The role of residual stress is established herein not only as a trigger to accelerate the amorphous-to-nanocrystalline phase transformation but also as a decisive contributor to the mechanical and GMI performance. The unique simultaneous improvement of both mechanical and GMI properties of cold-drawn Co-based microwires opens up new possibilities for a variety of engineering applications, such as high-performance magnetic, stress and biological sensors.

Nonlinear tensile deformation behavior of small-sized metallic glasses

Nonlinear Tensile Deformation Behavior of Melt-Extracted Co69.5fe4.5cr1si8b17 Amorphous Wires

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Tensile deformation behaviors and damping properties of small-sized Cu-Zr-Al metallic glasses

Micro forming and deformation behaviors of Zr50.5Cu 27.45Ni13.05Al9 amorphous wires

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Inelastic Deformation of Metallic Glasses under Dynamic Cyclic Loading

Tensile Properties and Fracture Reliability of a Glass-Coated Co-based Amorphous Microwire

Tensile ductility and necking of metallic glass

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Anelastic Behavior under Tensile and Shearing Stresses in Bulk Metallic Glasses

Non-localized deformation in metallic alloys with amorphous structure

Tensile deformation of metallic glass and shape memory alloy nanolaminates

In Situ Micromechanical Characterization of Metallic Glass Microwires under Torsional Loading

Elongation Behavior and Local Amorphization of Metallic Nanowire with Glassy Shell and Crystalline Core

Ductility and Work Hardening in Nano-Sized Metallic Glasses

Analytical Model and Molecular Dynamics Simulations of the Size Dependence of Flow Stress in Amorphous Intermetallic Nanowires at Temperatures Near the Glass Transition

Deformation Behavior of Metallic Glasses with Shear Band Like Atomic Structure: a Molecular Dynamics Study.

Ductile Necking Behavior of Nanoscale Metallic Glasses under Uniaxial Tension at Room Temperature

The Size-Dependent Non-Localized Deformation in A Metallic Alloy

Structural heterogeneity governing deformability of metallic glass