Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Preparation of nano-powder by thermal plasma

Recent Progresses in Material Fabrication and Modification by Cold Plasma Technique

Advances of hydrothermal synthesis of nano-powders

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Preparation and Characterization of Ni Nanopowders Prepared by Anodic Arc Plasma

The development of microwave plasma device for nanoparticles' preparation

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Research progress on nano-thermite

Controllable Preparation of Spherical Molybdenum Nano-Powders by One-Step Reduction of APM in Radio Frequency Hydrogen Plasma

Preparation of Nanometer Zinc Oxide Powders by Plasma Pyrolysis Technology and Their Applications.

Preparation of Nano-particles by γ Ray Radiation Technique

Nonthermal Plasma Synthesis of Nanocrystals: Fundamental Principles, Materials, and Applications

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Plasma-Assisted Approaches in Inorganic Nanostructure Fabrication

Production of Spheroidized Micropowders of W-Ni-Fe Pseudo-Alloy Using Plasma Technology

Preparation of Nano Powders by Sintering Process for Nanomaterials

Preparation Methods and Development Tendency of Ultrafine Nickel Powder Applicated in Conductive Pastes

Preparation of carbon nanotubes and nano-particles by microwave plasma-enhanced chemical vapor deposition

State-of-the-art Development of Research and Applications of Chemical Conversion Processes at Ultra-High Temperature in Thermal Plasma Reactors

Plasma Application for More Environmentally Friendly Catalyst Preparation

Advances on synthesis of nano-powders by liquid chemical methods