Abstract:Improving the mixing homogeneity of heterogeneous powder in real time plays an essential role in ensuring the forming quality of functionally graded materials (FGM) produced by laser-directed energy deposition (L-DED). In order to achieve a high performance of material composition and proportion control as forming FGM parts, this paper investigates the mixing mechanism of several typical powders including 316L and NiCrCoAlY used for the L-DED process driven by compressed gas. An innovative pneumatic powder mixer is designed and optimized by the CFD-DEM simulation method to analyze the mixing characteristics of heterogeneous particles. To improve the real-time mixing homogeneity of different mixing ratios in the conveying process, mixing experiments based on differences in powder properties were conducted by the additive-subtractive composite machining center, and a coefficient of variation method was proposed to describe the mixing homogeneity of non-uniform powders. The results of micro-morphology and EDS indicate that the mixing quality of the two-phase flow is significantly enhanced with the four 45° compression inlets and 2 m/s inlet velocity structure. The results show that the numerical analysis method proposed in this paper can effectively describe the mixing law of heterogeneous particles, and the compressed air intake velocity should not exceed the initial two-phase flow velocity. The horizontal and vertical components generated by the compressed air intake at 45° are more conducive to the formation of favorable perturbations to the two-phase flow, and the number of four and eight compressed air intakes that act uniformly on the flow field is more appropriate. After a certain period of time, the two-phase flow with low error of mixed powder quality can be produced continuously. The mixed powder quality is obviously improved after the disturbance of compressed air intake. The mixing uniformity of powder with low spherical particle proportion can be effectively improved by increasing the preset mixing proportion of non-spherical particles.

Powder Proportion During Laser Solid Forming From Blended Element Powders

Predicting the chemical homogeneity in laser powder bed fusion (LPBF) of mixed powders after remelting

Non-Equilibrium Solidification Behavior With Solute Trapping Associated With Powder Characteristics During Electron Beam Additive Manufacturing

Modeling of Laser Power Attenuation by Powder Particles for Laser Solid Forming

Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Processing-microstructure relationships in ferrous alloys via mixed powder laser powder bed fusion

On thermal properties of metallic powder in laser powder bed fusion additive manufacturing

Numerical simulation of powder effect on solidification in directed energy deposition additive manufacturing

Dynamics of the laser–powder interaction in the Ti6Al4V powder feeding process of laser-directed energy deposition additive manufacturing

Evaluation of powder mixing homogeneity for laser-directed energy deposition (L-DED) of functionally graded materials

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

A novel model of laser energy attenuation by powder particles for laser solid forming

Influence of powder size on defect generation in laser powder bed fusion of AlSi10Mg alloy

Powder coarsening mechanisms of Ti-6Al-4 V with multiple build cycles in laser powder bed fusion

Coupled Computational Fluid Dynamics-Discrete Element Method Model for Investigation of Powder Effects in Nonconventional Laser Powder Bed Fusion Process

Effect of Processing Parameters on Thermal Phenomena in Direct Laser Metallic Powder Deposition

Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes

Understanding grain evolution in laser powder bed fusion process through a real-time coupled Lattice Boltzmann model-Cellular Automaton simulation

Numerical Studies of Influencing Factors on the Homogeneity of the Powder Mixture during the Powder Spreading Process of Powder Bed Fusion–Laser Beam/Metal

Study on the numerical simulation of laying powder for the selective laser melting process