Abstract:Plate fin heat exchanger (PFHE) is key equipment where condensation, liquefaction, evaporation and other heat exchanges occur in alr separation unit (ASU). The distinctive characteristics of PFHE are small temperature difference unstable heat transfer;secondary heat transfer;low allowance resistance;fierce physical properties changing of multi-streams. The existing design methods face the problems such as unbalanced heat load of passage;maldistributed passage flow;increased flow resistance;decreased thermal efficiency. Therefore, a segmented design method of performance enhancement for large PFHE of cryogenic ASU is proposed. Passage amount of each fluid is preset according to the mass flow rate of multi-streams on the basis of ASU process. The feasible fluid is originally prearranged with standard normal distribution probability passage-by-passage forward from external cover plate. Arrangement backtracking is realized by rearranging finite passages backward. The optimal passage arrangement of PFHE is determined from all possible passage arrangement according to synthesis criteria of peak, variance and norm of accumulative heat load. Heat balance equation set is built in longitudinal and horizontal direction. Segmented design of PFHE is realized considering heat transfer among multi-streams of single-cold-stream and dual-cold-stream to improve design accuracy of long passage heat exchanger parameters. The PFHE experiment of heat transfer and flow resistance is accomplished. The PFHE cores with different fins and flow configurations are compared to verify the segmented design method of PFHE. The proposed method is applied to the development of corollary PFHE of 8×104 N·m3O2/h ASU.

An Experimental and Numerical Investigation of Flow Patterns in the Entrance of Plate-Fin Heat Exchanger

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

On the Heat Transfer Enhancement of Plate Fin Heat Exchanger

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

CFD Techniques for the Design of Plate-fin Heat Exchangers with Plain Fins and Serrated Fins

An Experimental and Numerical Investigation of Air Side Heat Transfer and Flow Characteristics on Finned Plate Configuration

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins

Influence of Fin Arrangement on Fluid Flow and Heat Transfer in the Inlet of a Plate-Fin Heat Exchanger

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Effects of Distribution Channel Dimensions on Flow Distribution and Pressure Drop in a Plate‐Fin Heat Exchanger

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

A numerical and experimental study of chevron, corrugated-plate heat exchangers