Abstract:To investigate the turbulence combustion characteristics of NH3/H2/Air in a multiple direct-injection combustor, the effects of equivalence ratio and hydrogen mixing ratio on the mixing characteristics of fuel–air in the mixing-nozzles as well as the flame and emission characteristics in the combustor are analyzed numerically. The results show that the spatial mixing deficiency of fuel–air mixture at the mixing-nozzle outlet is below 1% under all circumstances, which indicates that the mixing-nozzle exhibits satisfactory mixing performance and is capable of achieving the premixed combustion. Furthermore, the intensity of gas turbulence at the mixing-nozzle outlet (inlet of the combustor) is primarily affected by the gas flow within the fuel collision zone. Regarding the flame characteristics, the larger equivalence ratio increases the NH3 concentration (reducing combustion rate), and the larger hydrogen mixing ratio increases the gas turbulence intensity at the mixing-nozzle outlet (increasing gas flow velocity), which disrupts the stabilized combustion. Moreover, the reaction R18, NH3 + M ⇔ NH2 + H + M, inhibits NH3 consumption and the reactions R20, NH3 + O ⇔ NH2 + OH, and R21, NH3 + OH ⇔ NH2 + H2O, promote NH3 consumption, while R19, NH3 + H ⇔ NH2 + H2, initially inhibits and later promotes NH3 consumption, but primarily plays an inhibitory role. Furthermore, reactions R4, NH + H ⇔ N + H2, R11, NH2 + H ⇔ NH + H2, and R28, HNO + H ⇔ NO + H2, promote the H2 formation, and R19, NH3 + H ⇔ NH2 + H2, inhibits the H2 formation. As for the emission characteristics, R16, NH2 + NO ⇔ N2 + H2O, and R28, HNO + H ⇔ NO + H2, inhibit and promote NO generation in the upstream region of the combustor, respectively, while R36, NO2 + H ⇔ NO + OH, promotes NO generation in the whole area.

Numerical study of flow field characteristics for triplet impingement injector and combustor

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Spray flames in an air-heptane swirling combustor

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Measurements of Mixing Layers and Vortex Structures of the Strut-Induced Flow in a Scramjet Combustor with PIV and POD

Numerical Investigation on NH 3 /H 2 /Air Combustion Flow in a Multiple Direct-Injection Combustor

Numerical Investigation Of High Speed Combustion And Its Impact On Thermal Structure

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector

Experimental studies on swirling and recirculating two-phase flow field in a cold model of dual-inlet sudden-expansion combustor

Numerical Simulation of Ethylene Supersonic Combustion Using Partially Premixed Flamelet Model

Numerical study of turbulent swirling flow in combustor

Experimental and numerical investigations on flow field characteristics of pintle injector

NUMERICAL STUDIES ON THE MIXING OF CH 4 AND KEROSENE INJECTED INTO A SUPERSONIC FLOW WITH H 2 PILOT INJECTION

Numerical Research of Flame Propagation Process in a Supersonic Combustor with Multi-Strut

Numerical Simulation of Internal Flow Fields of Swirl Coaxial Injector in a Hot Environment.

Direct Numerical Simulation on Supersonic Turbulent Reacting and Non-Reacting Spray Jet in Heated Coflow

Numerical Simulation of Three-Dimensional Combustion Flow in a Gas Turbine Annular Combustor