Abstract:Based on the recently constructed n-body potential, both molecular dynamics and Monte Carlo simulations revealed that the Al-Zr amorphous alloy or metallic glass can be obtained within the composition range of 24–66 at. % Zr. The revealed composition range could be considered the intrinsic glass-forming range and it quantitatively indicates the glass-forming ability of the Al-Zr system. The underlying physics of the finding is that, within the composition range, the amorphous alloys are energetically favored to form. In addition, it is proposed that the energy difference between a solid solution and the amorphous phase could serve as the driving force of the crystalline to amorphous transition and the driving force should be sufficiently large for amorphization to take place. The minimum driving forces for fcc Al-based and hcp Zr-based Al-Zr solid solutions to amorphize are calculated to be about −0.05 and −0.03 eV/atom, respectively, whereas the maximum driving force is found to be −0.23 eV/atom at the alloy stoichiometry of Al60Zr40. A thermodynamics parameter γ¯, defined as the ratio of the driving force to the formation energy of the solid solution, is further proposed to indicate the glass-forming ability of an Al-Zr alloy. Thermodynamics calculations show that the glass-forming ability of the Al56Zr44 alloy is the largest, implying that the Al56Zr44 amorphous alloy is more ready to form than other alloys in the Al-Zr system. Besides, Voronoi analysis found that there exists a strong correlation between the coordinate number and structure. Amorphization could result in increase of coordinate numbers and about 1.5% volume-expansion. The volume-expansion induced by amorphization can be attributed to two factors, i.e., the total bond number of the Al-Zr amorphous phase is greater than that of the corresponding solid solution, and the averaged bond length of the Al-Zr amorphous phase is longer than that of the corresponding solid solution. For the Al-Zr alloys, especially for the Al-Zr amorphous phase, there exists a negative chemical micro-inhomogeneity in the alloys, suggesting that metallic bonds prefer to be formed between the atoms of dissimilar species. Finally, it is found that there is a weak correspondence between the bond-angle distributions of Al-Zr amorphous alloys and the solid solutions. It is further suggested that the configuration of Al-Zr amorphous alloys embodies some hybrid imprint of bcc, fcc, and hcp structures. More interestingly, the short-range order is also observed in the bond-angle distributions.

Consideration of cluster and state density of electrons during design of stable amorphous alloys

On the atomic structure of Zr–Ni and Zr–Ni–Al metallic glasses

Density change upon crystallization of amorphous Zr–Cu–Al thin films

Thermodynamic Calculation And Interatomic Potential To Predict The Favored Composition Region For The Cu-Zr-Al Metallic Glass Formation

Influence of Zr Element on the Atomic Structure of Al-Cu Alloy Liquid

A method locating Cu-Ti-based glass formers using Ni-Zr binary clusters

Predicted Optimum Composition for the Glass-Forming Ability of Bulk Amorphous Alloys: Application to Cu-Zr-Al

Formation and structure of Al-Zr metallic glasses studied by Monte Carlo simulations

Efficient atomic packing clusters and glass formation in ternary Al-based metallic glasses

Ab Initio Study on the Electronic Origin of Glass-Forming Ability in the Binary Cu–Zr and the Ternary Cu–Zr–Al(Ag) Metallic Glasses

Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys

Relationship between the precipitation of face-centered cubic Zr2Ni phase and the stability of supercooled liquid state in Zr-Cu-Ni-Al metallic glasses : Special issue on bulk amorphous, nano-crystalline and nano-quasicrystalline alloys

Atomic modeling to design favored compositions for the ternary Ni–Nb–Zr metallic glass formation

Chemical short-range order domain in bulk amorphous alloy and the prediction of glass forming ability

Formation of a Ni- and Be-free Zr-based glassy alloy in centimeter scale

Composition reign favored for the formation of CuZrAl amorphous phases investigated by ion beam mixing

Structure and Density of Transition Metal-Metalloid Amorphous Alloys

Understanding Glass-Forming Ability Through Sluggish Crystallization of Atomically Thin Metallic Glassy Films

Applications of Electron Reduced Density Function Analysis to the Study of Amorphous Materials: an Example of Zr64.13cu15.75ni10.12al10.0 and Zr55cu30ni5al10 Metallic Glasses

Precipitation of Zr2Cu Stable Crystalline Phase from Zr70Cu27.5Rh2.5 Amorphous Alloy

Theoretical study on the composition location of the best glass formers in Cu-Zr amorphous alloys