Abstract:The effects of sludge content and pyrolysis temperature on the pyrolysis process and product properties were studied through the co-pyrolysis of sludge and cotton stalk. Multi-objective fuzzy hierarchical analysis was used to analyze the multiphase properties of pyrolysis products, and describe the internal relationship between pyrolysis conditions and product properties. It has been proved using kinetic calculation that the mass ratio of sludge and cotton stalk is higher than 1:2 required the lower pyrolysis activation energy. According to the comparison between experimental and theoretical results, the addition of sludge is beneficial to increase the bio-oil yield. In terms of product performance, the addition of sludge and increase of pyrolysis temperature both can improve the specific surface area, pore volume of biochar and the pH value of bio-oil, reduce the total acid content, increase the total phenol content and optimize calorific value of bio-oil. The specific surface area of biochar, calorific value of bio-oil, total phenol content and pH were evaluated by multi-objective decision analysis method, the optimum process condition of sludge: cotton stalk = 2:1 at 600 °C. Under the conditions, the specific surface area of biochar is 57.40 m 2 /g, the pH of the bio-oil is 8.06, the total acid content is 5.94 mg/g, the calorific value is 27.18 KJ/g and the total phenol content is 47.32 mg/g, respectively. Compared to the pyrolysis product of cotton stalks, the specific surface area is increased almost 20 times, the calorific value is increased by 13%, the total acid content is decreased by 95%, and the total phenol content is similar. This study proposed a preparation process of bio-oil with high performance, and provided a theoretical basis for the subsequent co-pyrolysis research.

Process Optimization of Preparation and Performance Characterization of Oily Sludge-Based Adsorbent Material by Pyrolysis

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Sustainable Pyrolytic Sludge-Char Preparation on Improvement of Closed-Loop Sewage Sludge Treatment: Characterization and Combined In-Situ Application.

Combustion Behavior and Thermochemical Treatment Scheme Analysis of Oil Sludges and Oil Sludge Semicokes

Low Temperature Pyrolysis Characteristics of Oil Sludge under Various Heating Conditions

Emission characteristics of nitrogen and sulfur containing pollutants during the pyrolysis of oily sludge with and without catalysis

Pyrolysis Behaviors of Oil Sludge Based on TG/FTIR and PY-GC/MS

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Pyrolytic Temperature Dependent and Ash Catalyzed Formation of Sludge Char with Ultra-High Adsorption to 1-Naphthol

Research on Oily Sludge Pyrolysis Residue to the Adsorption of Biologically Treated Oil-Field Wastewater

Evolution of S/N Containing Compounds in Pyrolysis of Highly Oily Petroleum Sludge

Pyrolysis Performance and Kinetic Analysis of Oily Sludge

Continuous Catalytic Pyrolysis of Oily Sludge Using U-shape Reactor for Producing Saturates-Enriched Light Oil

Pyrolysis characteristics and kinetics analysis of oil sludge with CaO additive

Progress in Thermal Analysis Studies on the Pyrolysis Process of Oil Sludge

Investigation of oxygen-enriched atmosphere combustion of oily sludge: Performance, mechanism, emission of the S/N-containing compound, and residue characteristics

Modeling and simulation of coupled pyrolysis and gasification of oily sludge in a rotary kiln

Investigation of thermal degradation kinetics and catalytic pyrolysis of industrial sludge produced from textile and leather industrial wastewater

Pyrolysis properties of oil sludge

Study on the properties and components of solid-liquid products by co-pyrolysis of sludge and cotton stalk

Investigation of pyrolytic characteristics of three oily sludges with focus on properties of oil product