Abstract:The hollow polymeric nanoparticles of poly(styrene-co-divinylbenzene) of ultra-thin shell were synthesized by the interfacial RAFT miniemulsion polymerization with various particle sizes, void fractions and crosslinking degrees. With the void fraction increased, the hollow nanoparticles were more likely to collapse once dried. This collapse could be suppressed by simply increasing the level of crosslinker. The fraction of the collapsed hollow particles decreased nearly linearly with the increasing level of crosslinker. The non-collapsed hollow nanoparticles with a void fraction about 60% and shell thickness of 11.5 nm were fabricated with the crosslinker (divinylbenzene) of 0.67 mass fraction based on monomers. The resulted polymeric shell of the hollow nanoparticles was mesoporous, which had high surface area 514 m2/g, extremely large pore volume 2.74 ml/g and a most probable pore diameter of 9 nm. The structures of the hollow nanoparticles were mechanically stable not only in the solvent but also under harsh conditions like high temperature (200 °C) and strong shear. Additionally, the hollow nanoparticles were able to be fully re-dispersed in the solvent. The average hollow particle diameter was tuned from 70 nm to 199 nm by decreasing the level of the amphiphilic RAFT agent. The shell thickness was tuned from 10.6 nm to 19.3 nm by changing the core/shell ratios.

Hollow Structure and Its Analysis of Cross-linked Polystyrene Particles

Preparation of monodisperse polystyrene particles and assembly of spherical colloidal crystals

Synthesis of non-collapsed hollow polymeric nanoparticles with shell thickness on the order of polymer gyration radius

Controlling the Structure of Hollow Polystyrene Particles Based on Diffusion Kinetics in Miniemulsion Polymerization System

Hollow particles synthesized by water-soluble and oil-soluble initiators and the mechanism of incorporating an oil-soluble initiator

Preparation of Bigger Core-Shell PS/PMMA Composite Particles by Suspension-Emulsion Combined Polymerization

Quaternized Polystyrene Composite Hollow Particles

PARTICLE FEATURES AND FORMATION MECHANISM OF POLYSTYRENE-POLY(METHYL METHACRYLATE) COMPOSITE PARTICLES PREPARED BY SUSPENSION-EMULSION COMBINED POLYMERIZATION

Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

Multi-hollow Polymer Microspheres with Enclosed Surfaces and Compartmentalized Voids Prepared by Seeded Swelling Polymerization Method.

Hypercrosslinked Polystyrene Microspheres with Bimodal Pore Size Distribution and Controllable Macroporosity

Preparation and Structure Control of Hollow Polymer Particles——Synthesis and Effect on the Hollow Structure of the Core Latex

The formation and structure of suspension‐polymerized styrene–divinylbenzene copolymers

A novel approach for preparation of “cage-like” multihollow polymer microspheres through sulfonated polystyrene particles

Interface-Initiated Emulsion Polymerization: Synthesis of Hollow Sphere with A Hole in the Shell

Research on Preparation of Porous Micro-spheres

Highly crosslinked poly(styrene-<i>co</i>-divinylbenzene) microspheres prepared by precipitation polymerization: Effects of the polymerization parameters on the characteristics of the particles

STUDIES ON PREPARATION AND FULLERENATION OF CROSSLINKED STYRENE AND ACRYLAMIDE COPOLYMERIC PARTICLES

The Mechanism of the Formation of Multihollow Polymer Spheres Through Sulfonated Polystyrene Particles.

Preparation of Hollow Microspheres by Dispersion Polymerization-Seeded Swelling Polymerization

Synthesis of Monodisperse Crosslinked Polystyrene Microspheres Via Dispersion Copolymerization with the Crosslinker‐postaddition Method