Abstract:Poly(methylmethacrylate) (PMMA) and polystyrene(PS)/PMMA particles with Janus-like morphology were prepared via the internal phase separation followed by extraction of hexadecane (HD) template. The internal phase separation was triggered by evaporation of dichloromethane (DCM) from the polymer/HD/DCM-in-water emulsion droplets, which led to the formation of HD/PMMA or HD/PMMA/PS microparticles. After extraction of HD with hexane, PMMA or PS/PMMA particles with different morphologies were produced. Poly(vinyl pyrrolidone) (PVP), sodium dodecyl sulfonate (SDS) or sodium dodecyl benzylsulfate (SDBS) was chosen as the emulsifier. The morphology depended on the HD/polymer ratio and the interfacial tensions, which were adjusted by changing the type of the emulsifier and its concentration. With poly(vinyl pyrrolidone) (PVP) emulsifier, PMMA hollow spheres were observed; while with SDS emulsifier, the particles changed from bowl-like particles to hemispheres and truncated spheres with the increase of SDS content. The morphology of PS/PMMA composite particles depended on the ratio of the two polymers. Scanning electron microscopy observation, selective etching and X-ray photoelectron spectroscopy results confirmed that PMMA tended to engulf PS component. With the increase of PMMA/PS ratio, the particles changed the morphology from capped acorn to ‘ball in bowl’ morphology. Furthermore, the particle morphology was simulated via a theoretical model based on the minimum interfacial energy of the system. The simulation results agreed with the experimental observations. Our results indicate that internal phase separation is an effective method to obtain Janus-like microparticles. Via adjusting the composition of the system and the corresponding interfacial tensions, we could tailor the polymer particles with different morphologies.

The Mechanism of the Formation of Multihollow Polymer Spheres Through Sulfonated Polystyrene Particles.

Preparation of Porous Pmma Resin by A New Emulsion Polymerization Process and the Mechanism of Particle Formation

A novel approach for preparation of “cage-like” multihollow polymer microspheres through sulfonated polystyrene particles

Particle Features of A Poly(Methyl Methacrylate) Resin Prepared by A New Emulsion Polymerization Process

Preparation of Bigger Core-Shell PS/PMMA Composite Particles by Suspension-Emulsion Combined Polymerization

PARTICLE FEATURES AND FORMATION MECHANISM OF POLYSTYRENE-POLY(METHYL METHACRYLATE) COMPOSITE PARTICLES PREPARED BY SUSPENSION-EMULSION COMBINED POLYMERIZATION

Facile Fabrication of Monodisperse Polymer Hollow Spheres

Multi-hollow Polymer Microspheres with Enclosed Surfaces and Compartmentalized Voids Prepared by Seeded Swelling Polymerization Method.

Facile Fabrication of Multihollow Polymer Microspheres Via Novel Two-Step Assembly of P(St- Co - N BA- Co -AA) Particles

Structural diversity of multi-hollow microspheres via multiple Pickering emulsion co-stabilized by surfactant

A Microfluidic Approach to Fabricate Monodisperse Hollow or Porous Poly(Hema-Mma) Microspheres Using Single Emulsions As Templates

Fabrication and Morphology of Spongelike Polymer Material Based on Cross-Linked Sulfonated Polystyrene Particles.

The Preparation of Composite Microsphere with Hollow Core/Porous Shell Structure by Self-Assembling of Latex Particles at Emulsion Droplet Interface

A Facile Route to Prepare PMMA/SiO2 Core‐Shell Particles and PMMA Microcapsules Via Sonochemical Graft Polymerization

Study on the synthesis of polymeric hollow microspheres through acid-alkali swelling method

One-step Fabrication of Multihollow Polystyrene Particles from Miniemulsion System with Nonionic Surfactant

Multihollow Nanocomposite Microspheres with Tunable Pore Structures by Templating Pickering Double Emulsions

Fabrication of hollow silica spheres and their application in polyacrylate film forming agent

Polystyrene/melamine-formaldehyde hollow microsphere composite by self-assembling of latex particles at emulsion droplet interface

Preparation of Poly(β-Hydroxybutyrate) and Poly(lactide) Hollow Spheres with Controlled Wall Thickness

Janus-like Polymer Particles Prepared Via Internal Phase Separation from Emulsified Polymer/oil Droplets