Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Electrochemical Performance of CoSb3/MWNTs Nanocomposite Prepared by in Situ Solvothermal Synthesis

Electrochemical Performances of Nanosized Intermetallic Compound CoSb[sub 2] Prepared by the Solvothermal Route

Improved electrochemical performance of CoS2-MWCNT nanocomposites for sodium-ion batteries.

Solvothermal synthesis and electrochemical performances of nanosized CoSb3 as anode materials for Li-ion batteries

Electrochemical properties of CoSb3(–MCMB) anodes for lithium-ion batteries

Improvement of Electrochemical Performances of CoSb[sub 3] Anode by Using Nanosized Particles

In Situ Synthesis Of Cosb3-Nanocrystals/Graphene Hybrid Via One-Pot Solvothermal Route And Its Electrochemical Li-Storage Properties

Synthesis and Electrochemical Performances of Cobalt Sulfides/graphene Nanocomposite As Anode Material of Li-ion Battery

Synthesis and Characterization of MnIn2S4/Single-Walled Carbon Nanotube Composites as an Anode Material for Lithium-Ion Batteries

Lithium-Ion-Storage Behaviours of Cosb3 Intermetallic Compound and Effects of Some Carbonaceous Additives

Study of Nanosized CoSb As Novel Anode Material of Li-ion Batteries

Facile Synthesis of Ultrasmall CoS2Nanoparticles Within Thin N-Doped Porous Carbon Shell for High Performance Lithium-Ion Batteries

Formation of graphene-encapsulated CoS2 hybrid composites with hierarchical structures for high-performance lithium-ion batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

MoWS2 Nanosheet Composite with MXene as Lithium-Sulfur Battery Cathode Material

(Co, Ni)-NC/CNT Composite As a Cathode for Li-S Batteries

Solvothermal Synthesis of Nanosized CoSb2 Alloy Anode for Li-ion Batteries

Cobalt and Molybdenum Carbide Nanoparticles Grafted on Nitrogen‐Doped Carbon Nanotubes as Efficient Chemical Anchors and Polysulfide Conversion Catalysts for Lithium‐Sulfur Batteries

In Situ Transmission Electron Microscopy Observation of Electrochemical Behavior of CoS(2) in Lithium-Ion Battery.

Electrochemical Properties of Mo0.7Co0.3S2/g-C3N4 Nanocomposites Prepared by Solvothermal Method

Cosb3-Graphite Composite Anode Material for Lithium Ion Batteries