Abstract:The relationship between thermal insulation properties and porosity of fly ash based foam concrete was built, in which effective density, effective heat conductivity, and effective specific heat of fly ash based foam concrete were deduced as functions of porosity. Using the model, the effective heat conductivity of density of 580 kg/m(3) fly ash based foam concrete was the theoretically calculated as 0.145 W/(m K) while the experimental measured value was 0.142 W/(m K). The relative error of heat conductivity was very low at 2.1%. The effective specific heat within the model was 967.05 J/kg K and the experimental value was 920 J/kg K with a relative error of 5.1%. Then, the effective heat conductivity and specific heat models were incorporated into heat transferring model to calculate the temperature field of fly ash based foam concrete wall during a fire incident. Finally, the temperature field of fly ash based foam concrete wall and traditional dense concrete wall during fire incident were calculated and compared. Comparing the temperature field of the fly ash based foam concrete wall with the traditional concrete wall, it was found that at close to fire-side surface, the temperature in the fly ash based foam concrete wall could reach 1039 C, while the lowest temperature in the fly ash based foam concrete wall remained at 20 C for a thickness of 7 mm. In contrast, at close to fire side of surface, the temperature of traditional concrete wall was 987.2 C at 360 s and the lowest temperature in the traditional wall was 102.9 C at the opposite side-wall surface far away from the fire direction. As expected, the data demonstrated that the use of fly ash based foam concrete in wall construction adds greatly to the time for people to leave in safety.

Numerical Analysis on the Condensation Problem of Typical Self-thermal Insulation Wall with Aerated Concrete

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Finite Element Analysis of 3D Heat Transfer of Typical Thermal Bridge of Self-Thermal Insulation in Hot-Summer and Cold-Winter Zone

The Energy Saving Effect of Different Wall Insulation Configurations with the Intermittent and Compartmental Heating Method

Optimum Insulation Thickness of External Walls by Integrating Indoor Moisture Buffering Effect: a Case Study in the Hot-Summer-cold-winter Zone of China

Partial Insulation of Aerated Concrete Wall in Its Thermal Bridge Regions

Finite Element Analysis of the Temperature Field of the Insulated Wall Panel

Numerical Analysis of the Dynamic Heat Transfer Through an External Wall under Different Outside Temperatures

Analysis of condensation characteristics and anti-condensation measures of external thermal insulation wall in hot summer and cold winter areas

Finite element analysis on the exterior insulation systems with thermal insulation mortar based on ANSYS

Numerical Analysis on Thermal Behavior of Composite Wall Combined Autoclaved Aerated Concrete With Thermal Insulting Material in Summer Day

Research on thermal performance experiment of thermal concrete hollow shear walls

Thermal Bridge Effect of Aerated Concrete Block Wall in Cold Regions

Numerical Simulation Analysis on Thermal Characteristics of Concrete Hollow Building Block with Inserting Thermal Insulation Layer

Numerical Simulation of Porosity on Thermal Properties and Fire Resistance of Foamed Concrete

ANALYTICAL STUDY ON THERMAL STRESS OF AUTOCLAVED AERATED CONCRETE SHEAR WALLS

Comparative Studies on the Temperature Stresses in External Walls with Different Thermal Insulation Models

STUDY ON TEMPERATURE EFFECTS ON WALLS WITH THERMAL INSULATION MORTAR SYSTEM

Numerical Analysis of Passive Heavy Concrete Wall Cool Discharge Performance

Finite element analysis on the exterior insulation systems with thermal insulation glazed hollow bead mortar