Application of grey model and distributed activation energy model in research of pyrolysis of printed circuit board wastes

Quan Cui,Li Aimin,Gao Ningbo

2009-01-01

Abstract:A laboratory scale reactor and thermogravimetry analysis(TGA) were used to study the pyrolysis characteristics of printed circuit board(PCB) wastes,respectively.In laboratory scale reactor,a set of experiments was designed to evaluate the influence of final pyrolysis temperature(FPT)(400 ℃,500 ℃,600 ℃,700 ℃,800 ℃) on the pyrolysis product distribution.Based on the experimental date,a grey forecasting model GM(1,1) was developed to predict the pyrolysis product distribution of PCB wastes at different FPT based on gray theory.The calculation results show that predicted results of the established grey model GM(1,1) were good in agreement with experimental data.The model can commendably predict the yield of tar,char and gas at different pyrolysis temperatures.TG curves obtained thermogravimetrically under different heating rates(10,15,20 K/min) indicated that the curves were shifted to the higher temperature when increasing the heating rate.The TG curves were dynamically analyzed with the help of a distributed activation energy model(DAEM).Study results indicate that activation energy(E) is not a constant value during the pyrolysis process,and it changes with the weight loss rate.The activation energy obtained is between 140～250 kJ/mol.When the weight loss rate attains from 10% to 60%,the value of activation energy increases slowly.But when the weight loss rate is higher than 60%,the value of activation energy increases rapidly from 155.4 kJ/mol to 244.4 kJ/mol.