Abstract:Pt alloy electrocatalysts (e.g., Pt3Co) for oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs) have attracted a great deal of interest from worldwide researchers in past decades, due to the excellent ORR activity and cost-effective properties. However, the long period operation would yield sever dissolution of the non-precious metal which effects the ionomer microstructure, thus leading to significantly decreased ORR activity of catalyst and aggravated of the oxygen transport resistance in cathode catalyst layers (CCLs), especially the local oxygen transport resistance caused by the ultrathin ionomer film covering on catalyst surface. Herein, in this paper, the effects of Co2+ contamination on structure of ionomer films and the corre-sponding local oxygen transport behavior in CCLs are explored via physicochemical characterizations and mo-lecular dynamics (MD) simulations, limiting current method, as well as fuel cell performance measurement. It is found that Co2+ contamination reduces water content and increases the modulus of the ultrathin ionomer film, while reducing the distance between the sulfonic acid groups and increasing the aggregation size of the ionomer, which is related to the volume of hydrophilic domains. Additionally, the electrochemical measurement results demonstrate that as the degree of Co2+ contamination increases from 0 to 85 %, the local oxygen transport resistance increases from 27.74 s cm-1 to 42.43 s cm-1, and the peak power density of fuel cell reduces from 510 mW cm-2 to 453 mW cm- 2. The reason behind lies on that contaminated Co2+ tends to connect with sulfonate, then suppress the ionomer mobility and dislocate the local oxygen transport channels.

Electrochemical Impedance Spectroscopy Study of CoTETA/C Catalyst for Oxygen Reduction

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Reshaping the Cathodic Catalyst Layer for Anion Exchange Membrane Fuel Cells: from Heterogeneous Catalysis to Homogeneous Catalysis

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Improved Performance of Proton Exchange Membrane Fuel Cells with P-Toluenesulfonic Acid-Doped Co-Ppy/c As Cathode Electrocatalyst.

Electrochemical Performance of a Novel CoTETA/C Catalyst for the Oxygen Reduction Reaction

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Synthesis and characterization of non-precious metal binary catalyst for oxygen reduction reaction in proton exchange membrane fuel cells

Study on Oxygen Reduction Electrochemical Characteristics of Heat-Treated Catalysts Based on Cobalt-Porphyrin Complexes

Nitrogen‐Coordinated Single Cobalt Atom Catalysts for Oxygen Reduction in Proton Exchange Membrane Fuel Cells

Numerical simulation for non-uniform PtCo catalyst degradation under constant voltage condition and its impact on PEMFC performance

New Insight into the Effect of Co2+ Contamination on Local Oxygen Transport in PEMFCs

Preparation of Oxygen Reduction Catalyst Electrodes by Electrochemical Acidification and Synergistic Electrodeposition

Ordered Porous TiO2@C Layer as an Electrocatalyst Support for Improved Stability in PEMFCs

Study on the Membrane Electrode Assembly Fabrication with Carbon Supported Cobalt Triethylenetetramine As Cathode Catalyst for Proton Exchange Membrane Fuel Cell

Experimental Analysis of Catalyst Layer Operation in a High-Temperature Proton Exchange Membrane Fuel Cell by Electrochemical Impedance Spectroscopy

Durability Studies on Performance Degradation of Pt/C Catalysts of Proton Exchange Membrane Fuel Cell

Cobalt-Based Cathode Catalysts for Oxygen-Reduction Reaction in an Anion Exchange Membrane Fuel Cell

The Effect of Proton Conductivity of Fe–N–C–Based Cathode on PEM Fuel cell Performance

Defect‐Engineered ZIF‐Derived Non‐Pt Cathode Catalyst at 1.5 mg cm −2 Loading for Proton Exchange Membrane Fuel Cells