Abstract:This study reviews the recent progress in preparation and properties of diffusion coatings on magnesium alloys. Surface alloying of magnesium alloys by diffusion coatings has been considered as an effective approach to providing the protection of magnesium alloys because of the following distinct potential advantages. Firstly, the diffusion coating has high adhesion strength since there is a strong metallurgical bond between the coating and the substrate. Moreover, the good electrical conductivity of the coated magnesium alloy can be maintained and thus its electromagnetic shielding property will not be lost. In addition, the alloyed layer comprises of intermetallic compounds, which can improved both the corrosion resistance and the mechanical properties. Therefore, various methods have been developed in an effort to fabricate diffusion coatings on magnesium alloys. This review begins with the basic principles and challenges of fabricating diffusion coatings on magnesium alloys. The types and principles of coating methods are next described. The processes of preparing diffusion coatings can be categorized into two groups: (i) one-step processes including pack cementation, vacuum aluminizing, chemical vapor deposition and molten salt bath; (ii) multi-step processes such as surface mechanical attrition treatment plus pack cementation and post heat treatment of the metallic coatings. Based on understanding the principle of each coating process, the varied microstructures depending on the processing methods and parameters, are highlighted. The corrosion and mechanical properties of the coatings are also discussed on the basis of literature data. In particular, the corrosion property especial the passivation behavior of the diffusion coating is strongly influenced by the processing parameters and the subsequent coating microstructure. Through the experimental results obtained by various researchers, the coating process–microstructure–property relationships are discussed. This review closes with an outlook on areas that should be addressed in the future work.

The recent development of non-flux purification on magnesium alloy

Research status and prospects of melt refining and purification technology of magnesium alloys

New Research Development on Purification Technology of Magnesium Alloys

Current State and Prospect of Research on Purification Technology of Magnesium Alloys

Non-flux Purification Behavior of AZ91 Magnesium Alloy

Purifying Effect of New Flux on Magnesium Alloy

Purification Technology of AZ91 Magnesium Alloy Wastes

Development of Research on Magnesium Alloy Melting Technology

Development and Application of New Type Magnesium Alloys

A New Kind of Crude Magnesium Extraction Process and Device

Recent advances and future trend of aluminum alloy melt purification: A review

Purification Technology of Molten Aluminum

Effects of Non-Flux Purification on the Microstructure and Mechanical Properties of AZ31+xCa Mg Alloy

New Development Trend of Surface Treatment Technology for Magnesium Alloys

Recent research and advances in extrusion forming of magnesium alloys: A review

Development and Application of Magnesium Alloys in China

Study on Novel Fluxes for the Purification of Aluminum Alloy

Current Research and Future Prospect on Microstructures Controlling of High Performance Magnesium Alloys During Solidification

Effect of Flux Purification on Fluidity of Mg-Gd-Y-Zr Magnesium Alloy

Development State of Study on Surface Treatment of Magnesium Alloys

Protective Diffusion Coatings on Magnesium Alloys: A Review of Recent Developments