Abstract:Examining various properties of PP/EPDM TPV enhanced with interfacial compatibilizers and cellulose nanocrystals, while establishing correlations between morphology and these properties. In this study, dynamically vulcanized thermoplastic elastomer nanocomposites consisting of polypropylene (PP) as the thermoplastic matrix, ethylene propylene diene monomer (EPDM) rubber as the dispersed phase, and needle‐like cellulose nanocrystals (CNC) were investigated. The two polymers were melt blended in a ratio of 70/30 (PP/EPDM) and 60/40% w/w (PP/EPDM) together with CNC (2, 3, and 5 phr) and sulfur‐curing system. The potential of EPDM‐g‐MA and PP‐g‐MA's as interfacial compatibilizers for enhancing interfacial interactions between components and partitioning of CNC between the two polymer phases was examined by measuring the decrease in the size of EPDM particles. The resulting thermoplastic vulcanizates (TPV) were characterized using a melt rheometric mechanical spectrometer (RMS), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and tensile tests. The inclusion of any type of interfacial compatibilizers led to enhanced tensile properties when compared to the samples lacking compatibilizers in both TPVs and TPEs in different ratios. EPDM‐g‐MA was found to be more effective for 60/40% w/w (PP/EPDM) TPVs, while PP‐g‐MA showed higher potential for 70/30% w/w TPVs. The CNC‐reinforced TPVs displayed higher melt elasticity than their unloaded counterparts. These nanocomposites also showed reduced EPDM particle size, enhanced Young modulus, and a higher degree of crystallinity. Highlights Nanocomposite thermoplastic vulcanizates (TPVs): polypropylene (PP)/ethylene propylene diene monomer (EPDM)/cellulose nanocrystals (CNC) with matrix‐dispersed morphology. Interfacial enhancement: Compared EPDM grafted maleic anhydride (EPDM‐g‐MA) and PP‐g‐MA potentials. Tensile properties: EPDM‐g‐MA is more effective in higher rubber content TPVs. Mechanical enhancements: Improved properties and Young's modulus in CNC‐filled TPVs. Diverse applications: PP/EPDM/CNC nanocomposites in auto, electrical, electronic, and packaging industries.

Effect of Nano-Sio2 on the Properties of EPDM/PP Thermoplastic Vulcanizate

Effect of Nano-CaCO3 on Properties of EPDM/Polypropylene Thermoplastic Vulcanizate

Preparation of TPEE/ACM/Nano-SiO_2 Composite via Dynamic Vulcanization

Effect of Rubber Nanoparticle Agglomeration on Properties of Thermoplastic Vulcanizates During Dynamic Vulcanization.

Thermal Stability, Smoke Emission and Mechanical Properties of Poly(vinyl Chloride)/hydrotalcite Nanocomposites

Morphology and mechanical properties of poly(vinyl chloride)/nano-hydrotalcite composites

Unexpected Improvement of Both Mechanical Strength and Elasticity of EPDM/PP Thermoplastic Vulcanizates by Introducing β-Nucleating Agents

Mechanical Properties Of Pp/Epdm/Nano-Sio2 Ternary Composites

Mechanical and Thermal Properties of Nanosized Titanium Dioxide Filled Rigid Poly(vinyl Chloride)

Effect of Nano-Sio2 on Granule Characteristic and Fusion Process of Poly(Vinyl Chloride-Co-Vinyl Acetate)/Nano-Sio2 Composite Resin

Preparation and Properties of Semi-Transparent EPDM/Montmorillonite Nanocomposites

Morphology and properties of PP/EPDM/nano-CaCO3 composite

Dynamically vulcanized CNC‐reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization

Coupling Effect of Molecular Weight and Crosslinking Kinetics on the Formation of Rubber Nanoparticles and Their Agglomerates in EPDM/PP TPVs During Dynamic Vulcanization.

Studies on Thermal and Combustion Properties of Thermoplastic Vulcanizates Composites Modified by Polyhedral Oligomeric Silsesquioxane

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Flame Retardant, Mechanical, and Hot Air Aging Properties of Ethylene‐propylene‐diene Monomer/ammonium Polyphosphate/nano‐silic Composite Rubber

Effect of Additives on the Morphology Evolution of EPDM/PP TPVs During Dynamic Vulcanization in a Twin-Screw Extruder

Effects of nano-SiO_2 on reinforcing and toughening polypropylene

The Effects of Different Processing Methods on the Morphology and Properties of PP/EPDM/Nano-CaCO3 Ternary Blend

Effects of shear during injection molding on the anisotropic microstructure and properties of EPDM/PP TPV containing rubber nanoparticle agglomerates