Abstract:Perfluoropolyether acids (PFPE-acids) were used to coat Fe3O4 magnetic nanoparticles after the chemical co-precipitation of iron (II & III) salts, following which the well-coated nanoparticles were dispersed in PFPE-oil for preparing superior ferrofluids, especially with high temperature resistance. A thermogravimetric analyzer, transmission electron microscope, vibrating sample magnetometer, X-ray diffractometer, and Fourier transform infrared spectrometer were used to investigate the influences of various factors, such as the chain length, dosage of the PFPE-acids, and pH of the precursor solution, on the performance of the nanoparticles and ferrofluids. Results showed that the coated PFPE-acids did not change the Fe3O4 phase, but had an effect on the nanoparticle size and the size distribution. The PFPE-acids were chemically adsorbed on the surface of the nanoparticles via the COO electronegative functional groups. The longer-chain-length PFPE-acids adsorbed on the Fe3O4 nanoparticles better at high temperatures, whereas the excessively long-chain-length PFPE-acids could hardly be adsorbed. The pH of the precursor solution had a significant effect on the coating of the nanoparticles: the PFPE-acids could not be adsorbed on the nanoparticles when the pH was too high, whereas the nanoparticles presented the disadvantage of corrosion when the pH was too low; the best adsorption was for pH between 6 and 6.5. The dosage of the PFPE-acids could not be in excess or deficient, else it would affect the stability of the ferrofluids, and the optimum value was found to be 36.15% from both experiment and theory. The obtained superior PFPE-oil-based ferrofluids exhibit exceptional stability and high-temperature resistance even at 200 degrees C, demonstrating their potential for use as a strengthener in sealing applications, in high-temperature environments. (C) 2018 Published by Elsevier B.V.

Praperation of Fe_3O_4 Hexane Ferrofluid with Phase-transfer Method

Praperation of Fe3O4 hexane ferrofluid with phase-transfer method

Synthesis of High Dispersed Fe3O4 Ferrofluids

Synthesis of Ferrofluids Using a Chemically Induced Transition Method and Their Characterization

Study of Polydiethylsiloxane-Based Ferrofluid with Excellent Frost Resistance Property

Ferrofluids Containing Fe3o4 Nanoparticles in Solidified Photoresist Carrier

Preparation and stability of magnetite ferrite magnetic fluid

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Fabrication and Characterization of Organic-based Fe_3O_4 Magnetic Fluid

Preparation of A Magnetic Fluid by Chemical Co-deposition Method

Preparation and Property Research of Perfluoropolyether Oil-Based Ferrofluid

Preparation and Characterization of Silicon Oil Based Ferrofluid

Preparation method of kerosene-based magnetic fluid in which oleic-acid-coated nano Fe3O4 disperses

Synthesis of Monodispersed Fe3O4 Magnetite Nanoparticles by ethylene glycol solvothermal method

Water-based Fe3O4 Magnetofluid Prepared by Hydrothermal Method

Study on Protonated Lipophilic Modification of Oleic Acid Bilayer-Coated Fe3 O4 Magnetic Particles

Synthesis of Ferrofluids Made of Iron Oxide Nanoflowers: Interplay between Carrier Fluid and Magnetic Properties

Preparation and characterization of water-based ultra-high density Fe3O4 magnetic fluid

A Study of Modified Fe3O4 Nanoparticles for the Synthesis of Ionic Ferrofluids

Influence of Various Parameters on the Performance of Superior PFPE-oil-based Ferrofluids

Study on the Fluidity Experiments of Engine Oil-Based Magnetic Fluid with Fe3O4/Ag Nanoparticles