Abstract:This paper presents a novel low-carbon binder formulated from fly ash (FA), ground granulated blast furnace slag, steel slag, and desulfurization gypsum as a quaternary solid waste-based material. It specifically examines the influence of FA content on the mechanical properties and hydration reactions of the quaternary solid waste-based binder. The mortar test results indicate that the optimal FA content is 10%, which yields a 28-day compressive strength 11.28% higher than that of the control group without FA. The spherical particles of fly ash reduce the overall water demand and provide a "lubricating" effect to the paste due to their continuous gradation, improving the fluidity of the slag-steel slag-gypsum cementitious materials. The micro test results indicate that fly ash has minimal effect on the early hydration products and process of the solid waste-based cementitious materials, but after 7 days, it continuously dissolves silicon-oxygen tetrahedrons or aluminum-oxygen tetrahedrons, consuming Ca2+ and OH− in the system. After 28 days, the amount of ettringite and C-(A)-S-H gel generated increases significantly. The pozzolanic activity of fly ash is mainly stimulated by the Ca(OH)2 from steel slag in the later hydration stage. Additionally, spherical fly ash particles can fill the voids in the hardened paste, reducing the formation of cracks and weak zones, and thereby contributing to a denser overall structure of the hydrated binder. The findings of this paper provide data support for the development of low-carbon cement-free binders using fly ash in conjunction with metallurgical slags, thereby contributing to the low-carbon advancement of the construction materials industry.

Research on Waste Gypsum-fly Ash-lime Binder

Performance of Green Binder Developed from Flue Gas Desulfurization Gypsum Incorporating Portland Cement and Large-Volume Fly Ash

A novel binder prepared from municipal solid waste incineration fly ash and phosphogypsum

MgO-based Binders with Different Formulations for Solidifying Pb and Cd in MSWI Fly Ash: Solidification Effect and Related Mechanisms

Cementitious binder derived with fluorogypsum and low quality of fly ash

Investigation on a New Hydraulic Cementitious Binder Made from Phosphogypsum

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

The Impact of Fly Ash on the Properties of Cementitious Materials Based on Slag-Steel Slag-Gypsum Solid Waste

Influence of solid waste gypsum and additives on the properties of sulfoaluminate cement-fly ash-gangue ternary binder

Microstructure and properties of the binder of fly ash-fluorogypsum-Portland cement

Cementitious binder of phosphogypsum and other materials

Study on preparation of inorganic binder stabilized material with large dosage of phosphogypsum

Modification of Lime-Fly Ash-Crushed Stone with Phosphogypsum for Road Base

Mechanical properties and microscopic mechanism of solid waste based binder solidified stone waste

Lime activated flyash-phosphogypsum blend as a low-cost alternative binder

Effect of hydraulic binders on engineering properties of coal ash for utilization in pavement layers

Study on the Effect of Waste Gypsum on Hardening Paste Structure and Performances of Lime-Fly Ash

Fly Ash/Blast Furnace Slag-Based Geopolymer as a Potential Binder for Mine Backfilling: Effect of Binder Type and Activator Concentration

Solidification and field assessment of soft soil stabilized by a waste-based binder using deep mixing method

High industrial solid waste road base course binder: Performance regulation, hydration characteristics and practical application

Insight into the performance of composite binder with high-volume steel slag, blast furnace slag and desulfurization gypsum