Abstract:OBJECTIVE:To explore the effect of changes of processing time on the surface properties of titanium coating formed by micro-arc oxidation (MAO).METHODS:Forty-four disc-shaped pure titanium specimens with 10 mm diameter and 1 mm thickness were equally divided into 4 groups and processed by MAO technique in electrolytes containing 0.2 mol/L calcium acetate (CA) and 0.02 mol/L β-glycerol phosphate disodium salt pentahydrate (β-GP). The processing time were set at 1 min, 5 min, 10 min and 15 min respectively. The topograph of the MAO film surface and the film-substrate interface was observed by a scanning electron microscopy (SEM), and the composition was analyzed by an energy dispersive spectroscope (EDS) incorporated in the SEM. The phase and the microstructure of the film were analyzed by X-ray diffraction (XRD). The roughness of the film was measured using a roughness tester. The surface static contact angle was detected by a contact angle measurement instrument and the surface energy was calculated accordingly.RESULTS:With the increase of processing time from 1 min to 15 min, the pore size increased from (1.30 ± 0.07) µm to (1.55 ± 0.09) µm, and film thickness increased from (10.2 ± 1.1) µm to (20.9 ± 2.9) µm. The content of the Ca in the film increased accordingly, and Ca/P increased from 1.99 to 2.45, and the surface energy increased from 24.62 mJ/m(2) to 39.49 mJ/m(2). Meanwhile, the XRD pattern indicated that rutile increased but anatase and titanium decreased gradually. At the time of 15 min, part of the MAO film peeled off.CONCLUSIONS:Processing time has impact on the thickness, surface topography, crystal component and surface energy of titanium MAO coating. MAO film treated for 5 - 10 min demonstrated favorable surface properties.

Effects of microarc oxidation duty cycle and frequency on the bonding strength of titanium to porcelain

Effects of microarc oxidation time on bonding strength of titanium to porcelain

The effects of voltage at microarc oxide treatment on the bonding strength of titanium to porcelain

Effects of microarc oxidation treatment on bonding strength of titanium-porcelain composite

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Effects of Micro-Arc Oxidation on Bond Strength of Titanium to Porcelain

Effects of Electrolyte's Concentration at Micro-Arc Oxide Treatment on the Bonding Strength of Titanium to Porcelain

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Effect of Pulse Duty Cycle and Oxidation Time on Microstructure and Properties of Micro-arc Oxidation Coatings on Ti6Al4V Alloy

Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium

The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface.

Effect of applied voltage on the structure of microarc oxidized TiO2-based bioceramic films

Characteristic of Microarc Oxidized Coatings on Titanium Alloy Formed in Electrolytes Containing Aluminate and Zro2 Particles

Effects of Electrical Parameters on the Microstructure of Microarc Oxidation Ceramic Coatings on Ti6al4v Alloy

Effect of the change of Ca/P concentration on the mechanical properties of Ti-Alloy micro-arc oxidation coating

Microstructure and Apatite-Forming Ability of the Mao-Treated Porous Titanium

The effect of oxidation time on the micro-arc titanium dioxide surface coating containing Si,Ca and Na

Effects of Cathodic Voltages on the Structure and Properties of Ceramic Coatings Formed on NiTi Alloy by Micro-Arc Oxidation

[Effect of Processing Time on the Surface Properties of Titanium Micro-Arc Oxidation Film].

The effects of anodic and cathodic processes on the characteristics of ceramic coatings formed on titanium alloy through the MAO coating technology

Effects of the Pulse Energy on the Characteristics of Ceramic Coatings on Titanium Alloys Prepared by Micro-arc Oxidation