Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Synthesis and Properties of Cationic Photopolymerizable Hyperbranched Polyesters with Terminal Oxetane Groups by the Couple-Monomer Polymerization of Carboxylic Anhydride with Hydroxyl Oxetane

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

High Molecular Weight Polyesters Derived from Biobased 1,5-Pentanediol and a Variety of Aliphatic Diacids: Synthesis, Characterization, and Thermo-Mechanical Properties

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Reaction and Characterization of Crosslinking Hyperbranched Poly(amine-ester) with Succine Anhydride

Facile Polycyclotrimerization of "simple" Arylene Bipropiolates: A Metal-Free, Regioselective Route to Functional Hyperbranched Polymers with High Optical Transparency, Tunable Refractive Index, Low Chromatic Aberration, and Photoresponsive Patternability

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Hyperbranched Polyester As Additives in Filled and Unfilled Epoxy-Novolac Systems

High Molecular Weight Soybean Oil-based Polyesters through Carboxyl-ester Transesterification

One-pot synthesis of hydroxyl terminated hyperbranched semi-aromatic Poly(ester-imide)s

Synthesis, Morphology and Application of Alkylaryl Hyperbranched Polyesters

Synthesis of Hyperbranched Polymer and Properties of UV Curing Film

Carbazole-Based Hyperbranched Polyester Polyol: Structural, Rheological, Thermal and Optical Properties

aracterization of novel dumbbell shaped copolymers poly ( ethylene oxide ) xb-polystyrene-b-poly ( ethylene oxide ) x with tunable side arms by combination of e ffi cient thiol-ene addition reaction with living polymerization mechanism

Synthesis and application of water-soluble hyperbranched polyester modified by trimellitic anhydride

Crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties: Synthesis, characterization and properties

Synthesis and Properties of Polyol Copolymer with Alternating Methacrylate-Vinyl Ether Backbone.

Aliphatic polyesters based on 1,4-butanediol and even numbered C4 - C20 dicarboxylic acids - synthesis and properties including after surface treatment by VUV photo-oxidation

Synthesis and Characterization of A Hyperbranched Polyol with Long Flexible Chains and Its Application in Cationic Uv Curing

Poly-(3-ethyl-3-hydroxymethyl)oxetanes—Synthesis and Adhesive Interactions with Polar Substrates

Synthesis and Properties of Photocurable Polymers Derived from the Polyesters of Glycerol and Aliphatic Dicarboxylic Acids