Abstract:Dense BaCe0.8Sm0.2O2.90 (BCSO) thin films were successfully fabricated on porous NiO–BCSO substrates by dry pressing process. As characterized by scanning electron microscope, the BCSO films were about 50 μm. With Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) as cathodes, single cells were tested at 600 and 700 °C with humidified (3% HB2O) hydrogen as fuel and oxygen as oxidant. The open circuit voltage of 1.049 V at 600 °C and 1.032 V at 700 °C were achieved, indicating negligible gas permeation through the BCSO thin films. Maximum power densities of 132 and 340 mW/cm2 were obtained at 600 and 700 °C, respectively. The impedance measurements at open circuit conditions showed that there were two rate-limiting processes for the electrode reactions and that the cell performances were essentially determined by the electrode polarization resistances at temperature below 650 °C, which implied that it was essential to reduce the electrode polarization by developing novel electrode materials to improve the performance of ITSOFC based on BCSO electrolyte. Conductivities of BCSO under the cell operating circumstances were obtained as 0.00416, 0.00662 and 0.00938 Scm−1 at 500, 600 and 700 °C, respectively. The activation energy of BCSO conductivity was calculated as 29.5 and 43.8 kJ/mol for the temperature range of 550–700 °C and of 400–550 °C, respectively. Endurance test was firstly carried out with 75 μm BCSO electrolyte at 650 °C at the operating voltage of 0.7 V and current density about 0.12 A/cm2. Both voltage and current density remained stable for 1000 min.

Investigation of single SOEC with BSCF anode and SDC barrier layer

Microstructural Characterization and Electrochemical Properties of Ba0.5Sr0.5Co0.8Fe0.2O3− and Its Application for Anode of SOEC

Preparation and Characterization of NiO/YSZ Cathode and BSCF/SDC Anode of SOEC for Hydrogen Production

A high performance BaZr0.1Ce0.7Y0.2O3-δ-based solid oxide fuel cell with a cobalt-free Ba0.5Sr0.5FeO3-δ–Ce0.8Sm0.2O2-δ composite cathode

A novel electronic current-blocked stable mixed ionic conductor for solid oxide fuel cells

High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3-δ-Ce0.8Sm0.2O2-δ composite cathode

Intermediate-temperature Electrochemical Performance of a Polycrystalline PrBaCo2O5+δ Cathode on Samarium-Doped Ceria Electrolyte

High performance layered SmBa0.5Sr0.5Co2O5+δ cathode for intermediate-temperature solid oxide fuel cells

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Structure Calculation and Performance Research of Perovskite-Type BaxSr1-xCo0.8Fe0.2O3-δ Oxygen Electrode for Hydrogen Production Through High Temperature Solid Oxide Electrolyzer Cells

Properties and Performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ + Sm0.2Ce0.8O1.9 Composite Cathode

Performances of YBaCo1.4Cu0.6O5+δ–Ce0.8Sm0.2O1.9 Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

Improving stability and electrochemical performance of Ba0.5Sr0.5Co0.2Fe0.8O3-δ electrode for symmetrical solid oxide fuel cells by Mo doping

Development of a new ceria/yttria-ceria double-doped bismuth oxide bilayer electrolyte low-temperature SOFC with higher stability

Electrochemical Properties of Intermediate-Temperature Sofcs Based on Proton Conducting Sm-Doped Baceo3 Electrolyte Thin Film

A novel ceria-based solid oxide fuel cell free from internal short circuit

Electrochemical performance of novel cobalt-free oxide Ba0.5Sr0.5Fe0.8Cu0.2O3-δ for solid oxide fuel cell cathode

Ce0.8sm0.2o1.9 Decorated with Electron-Blocking Acceptor-Doped Baceo3 As Electrolyte for Low-Temperature Solid Oxide Fuel Cells

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

Bilayered BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ /Ce 0.8 Sm 0.2 O 2-δ electrolyte membranes for solid oxide fuel cells with high open circuit voltages