Abstract:The high-temperature flow behavior of TG6 titanium alloy at strain rates from 0.001 to 10 s-1 and temperatures from 850-1050 ℃ was systematically studied by Gleeble-3500 thermal simulation compressor, and four different constitutive equations (classical Arrhenius (AR) model, modified Johnson-Cook (MJC) model, modified Zerilli–Armstrong (MZA) model, artificial neural network (ANN) model) were derived. EBSD results show that the deformation behavior of TG6 titanium alloy has flow softening characteristics. Furthermore, the calculated correlation coefficient (R) and average absolute relative error (AARE) are used to make an error analysis of the fit accuracy of the above models to evaluate the predictive ability of the TG6 titanium alloy flow behavior. The results of the comprehensive analysis are as follows: on the one hand, it is revealed that different predictive capabilities of the high-temperature flow behavior of TG6 titanium alloy by all the four models based on the meticulous experimental comparison and validation (AR model: R2 is 97.376% and AARE is 14.16%; MJC model: R2 is 97.42% and AARE is 18.5%; MZA model: R2 is 90.598% and AARE is 19.32%; ANN model: R2 is 99.94% and AARE is 2.14%), but MZA model is a special case. On the other hand, the MJC and AR model can be considered as the best choices for relatively accurate description and prediction of the flow stress behavior of TG6 titanium alloy when the predictability of the model and the material parameters to be considered.

Prediction of flow stress in isothermal compression of Ti60 alloy using an adaptive network-based fuzzy inference system

An ANFIS model for the prediction of flow stress of Ti600 alloy during hot deformation process

Artificial Neural Network Approach to Predict the Flow Stress in the Isothermal Compression of As-Cast Tc21 Titanium Alloy

A Comparative Study on Artificial Neural Network, Phenomenological-Based Constitutive and Modified Fields–Backofen Models to Predict Flow Stress in Ti-4Al-3V-2Mo-2Fe Alloy

Application of Constitutive Models and Machine Learning Models to Predict the Elevated Temperature Flow Behavior of TiAl Alloy

The Prediction of Flow Stress in the Hot Compression of a Ni-Cr-Mo Steel Using Machine Learning Algorithms

Development of constitutive relationship model of Ti600 alloy using artificial neural network

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Application of four different models for predicting the high-temperature flow behavior of TG6 titanium alloy

Flow Stress Behavior of Ti-4.5Al-3Mo-1V Alloy During Hot Compression Deformation

Research on hot deformation behavior and numerical simulation of microstructure evolution for Ti–6Al–4V alloy

Modeling the High Temperature Deformation Constitutive Relationship of TC4-DT Alloy Based on Fuzzy-neural Network

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Modeling Constitutive Relationship of Ti17 Titanium Alloy with Lamellar Starting Microstructure

Modeling the Relationship Between Hydrogen Content and Mechanical Property of Ti600 Alloy by Using ANFIS

High-Precision Constitutive Model Of Ti6242s Alloy Hot Deformation Based On Artificial Neural Network

Comparison Between Four Flow Stress Models Characterizing the Constitutive Behavior of Hot Deformation of 40mn Steel

A New Flow Stress Model Based on Arrhenius Equation to Track Hardening and Softening Behaviors of Ti6Al4V Alloy

Flow Stress Models for 40Cr10Si2Mo Steel and Their Application in Numerical Simulation of Hot Forming

A comparison study at the flow stress prediction of Ti-5Al-5Mo-5V-3Cr-1Zr alloy based on BP-ANN and Arrhenius model

Prediction of FV520B Steel Flow Stresses at High Temperature and Strain Rates