Abstract:In sensorless control of interior permanent magnet synchronous motors (IPMSMs), the fundamental PWM excitation (FPE)-based methods use PWM signals excitation and measure the derivative of the stator current as responses to estimate the rotor position. As the signal injection is no more required, the FPE-based methods have the potential to simplify the controller and achieve precision sensorless servo control. However, the current derivative is hard to measure accurately. Therefore, existing FPE-based methods usually suffer from significant position estimation errors. In this paper, a novel FPE-based rotor position estimation method is proposed with high stability and accuracy. Different from existing methods which usually sample current derivative only 2 times per PWM cycle, the proposed method takes 2 to 6 samples, depending on the amplitude and direction of the voltage vector. To make full use of all recent sample points, a first-in-first-out (FIFO)-based least squares algorithm is proposed. The optimal rotor position estimation can be obtained with only a small amount of computation since the analytical solution is given. Simulation results demonstrate that the rotor position can be estimated with an accuracy of 1 electrical degree under various speed and load. Sensorless closed-loop trajectory tracking control based on the proposed method is realized, which shows an exciting prospect of sensorless control in high-performance servo systems.

Estimation of Rotor Zero-position Error for PMSM

Analysis and Suppression of Rotor Eccentricity Effects on Fundamental Model Based Sensorless Control of Permanent Magnet Synchronous Machine

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

Investigation of PMSM Back-EMF using Sensorless Control with Parameter Variations and Measurement Errors

Sensorless Interior-Pmsm Control with Rotational Inertia Adjustment

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Sensorless Estimation and Convergence Analysis Based on MRAS for PMSM

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Start method for PMSM without position sensor in rotating conditions

Rotor Position Estimation for PMSM Based on Sliding Mode Observer

Initial position estimation for sensorless surface-mounted PMSM with near-zero saliency at standstill

Rotor Position Estimation of PMSM in Low-Speed Region and Standstill Using Zero-Voltage Vector Injection

Research on the Influence of the Position Detection Error to the PMSM Drive System

Analysis of Rotor Position Estimated Error for IPMSM Using Carrier Frequency Component Method

Rotor Position Robust Estimation Method For Sensorless Ipmsm At Low Speeds Including Standstill Operation

A New Approach to Estimated Rotor Position for PMSM Based on Sliding Mode Observer

High-Precision Position Error Correction Method for the PMSM Based on Low-Order Harmonic Suppression

A Novel Rotor Position-Offset Injection-Based Online Parameter Estimation of Sensorless Controlled Surface-mounted PMSMs

A Novel Fundamental PWM Excitation-Based Rotor Position Estimation Method for Precision Sensorless Control of IPMSMs