Abstract:Curing of a thermoset polythiourethane system of a diisocyanate and a trithiol was studied by Fourier infrared (FTIR) spectroscopy, dynamic rheological measurements and scanning electron microscopy (SEM). The isocyanate conversion during the isothermal cure reaction from the FTIR spectroscopy results suggests that the rate of isocyanate conversion differs greatly in the temperature range of 100 degrees C to 120 degrees C. Time sweep at three constant temperatures was conducted to examine the isothermal curing process and determine the gel time of the polythiourethane system. The gel time can be determined by the crossover of storage modulus G' and loss modulus G ''. The gel time is dramatically affected by the curing temperature. Frequency sweep was also performed to confirm the gel points obtained from the time sweep experiments. Scanning electron microscopy (SEM) observation indicates that polythiourethane polymers formed at different curing temperatures possess similar microstructures. Rheokinetics analysis shows the second-order kinetic characteristics of the cure reaction. The activation energy obtained based on the gel time was close to that obtained based on the rheokinetics analysis, indicative of the validness of the Kamal-Sourour model for the polythiourethane system. [GRAPHICS] Curing of a thermoset optical polythiourethane system of a diisocyanate and a trithiol was studied by Fourier infrared spectroscopy, dynamic rheological measurements and scanning electron microscopy. The conversion increased with prolonged time until the -NCO was consumed completely. Rheokinetics analysis shows the second-order kinetic characteristics of the cure reaction.

Research of Synthesis Process of TDI-TMP Curing Agent by FT-IR

Study on ternary polymerization of toluene diisocyanate

Curing and Cross-Linking Processes in the Poly(3,3-bis-azidomethyl oxetane)-tetrahydrofuran/Toluene Diisocyanate/Trimethylolpropane System: A Density Functional Theory and Accelerated ReaxFF Molecular Dynamics Investigation

Effects of Active Diluents on Solidifying Process of UV-curing Reaction for Polyurethane Acrylate

Thermail Curing of N, N, N', N' -Tetra Propargyl-P, P' -Diaminao Diphenyl Methane and Themal Stability

Curing polycondensation kinetics of multi-silanol

Synthesis of Trimethylolpropane Triacrylat

Thermolysis and analysis of TDI char by supercritical methanol using TGA, DSC, IR and SEM

Rheological and Kinetic Investigation into Isothermal Curing of a Thermoset Polythiourethane System

Quality Control of Trimethylolpropane Synthesis by Intelligent Retrieval of Near-Infrared Spectra

Cure kinetics study of the polymerization of N,N,N ' N '-tetrapropargyl-p,p '-diamino diphenyl methane with 1,1 '-bezidomethyl-4,4 '-biphenyl

Reaction Mechanism of Terephthaloyl Chloride/N-Methyl-2-Pyrrolidone and the Effect on Poly(P-Phenylene Terephthalamide) Polymerization

Studies of Synthesis Technics Based on Polyurethane/poly (ethyl Methacrylate) IPN Curing at Room Temperature

Studies on the Phase Separation of Poly(ether Imide)modified Tetrafunctional Epoxy Resin——The Effect of Curing Agent Ratio

Investigation of Curing Characterization of Acetylene-Terminated Polyisoimide Oligomer

Preparation and properties of EPDM/TiO2 composites

Synthesis and Characterization of a New Polytriazole Resin Derived from N , N -Dipropargyl- p -propargyloxyaniline

Synthesis of TDI-Polyurethane/Polyacrylate Composite Emulsion by Solvent-free Method and Performances of the Latex Film

Catalyzed HTPB/HDI-Trimer Curing Reactions and Influence on Pot Life

Preparation and properties of self-healing tung oil-based polymer networks driven by thermo-reversible Diels–Alder reaction

Curing Behavior and Thermal Properties of Trifunctional Epoxy Resin Cured by 4,4′‐Diaminodiphenylmethane